[1] Xu X, Chen B, Xu D J[M]. Ramjet principle and technology(2014).

[2] Mei L F, Yan D B, Chen G Y et al. Comparative study on CO2 laser overlap welding and resistance spot welding for automotive body in white[J]. Materials & Design, 78, 107-117(2015).

[3] Rojhirunsakool T, Sirivedin K. Investigation of welding speed parameters on Ni-base superalloy by laser welding process[J]. Key Engineering Materials, 856, 85-91(2020).

[4] Chen X Y, Chen L, Chang M et al. Study on weld shaping and joint properties for SP700 titanium alloy of laser welding[J]. Transactions of the China Welding Institution, 39, 121-125, 134(2018).

[5] Chen G Y, Mei L F, Zhang M J et al. Research on key influence factors of laser overlap welding of automobile body galvanized steel[J]. Optics & Laser Technology, 45, 726-733(2013).

[6] Reisgen U, Olschok S, Jakobs S et al. Laser beam welding under vacuum of high grade materials[J]. Welding in the World, 60, 403-413(2016).

[7] Li L, Li H, Xu M et al. Effect of heat input on microstructure and fracture mechanism of ultra high strength DP1000 steel laser welded joint[J]. Transactions of the China Welding Institution, 39, 75-80, 132(2018).

[8] Yu K. Microstructure and mechanical properties evolution and corrosion behavior of laser welds in GH3535 alloy[D], 39-45(2018).

[9] Wang X G, Liu F C, Zhou B S. Microstructure and deformation uniformity of GH3044 alloy joints by laser beam welding[J]. The Chinese Journal of Nonferrous Metals, 29, 2549-2560(2019).

[10] Sun W J, Wang S L, Tan G H et al. Effect of material states on microstructure and properties of GH4169 superalloy laser-welded joint[J]. Chinese Journal of Lasers, 47, 1002006(2020).

[11] Daneshpour S, Riekehr S, Koçak M et al. Mechanical and fatigue behavior of laser and resistance spot welds in advanced high strength steels[J]. Science and Technology of Welding and Joining, 14, 20-25(2009).

[12] Martinson P, Daneshpour S, Koçak M et al. Residual stress analysis of laser spot welding of steel sheets[J]. Materials & Design, 30, 3351-3359(2009).

[13] Torkamany M J, Sabbaghzadeh J, Hamedi M J. Effect of laser welding mode on the microstructure and mechanical performance of dissimilar laser spot welds between low carbon and austenitic stainless steels[J]. Materials & Design, 34, 666-672(2012).

[14] Lü T, Lei Z L, Chen Y B et al. Influence of different shapes on the mechanical properties of laser spot weld of TC4 titanium alloy[J]. Chinese Journal of Lasers, 40, 1203002(2013).

[15] Liu C Y, Ma R, Tan C W et al. Comparison of ring-form and C-form laser welding for GH99 superalloy[J]. Chinese Journal of Lasers, 41, 0803002(2014).

[16] Zhou C D. Laser path of laser welding point, and laser welding method[P].

[17] Zhang W. Formation mechanism and fracture behavior of laser spot welded third generation high-strength steel[D], 107-109(2021).

[18] Chen S M, Zhao A A, Jiang Y et al. Influence of the technological parameters of TC4 titanium alloy laser wire filling welding on weld seam macroformation[J]. Chinese Journal of Lasers, 48, 1402007(2021).

[19] Chen Z W, Ma C Y, Chen B et al. Microstructure and properties of medium-thick stainless steel by laser-MIG hybrid welding[J]. Laser & Optoelectronics Progress, 57, 231405(2020).