[1] Ai K, Cheng J J, Zhu K F et al. Design and realization of a novel poly-silicon light-emitting device based on standard CMOS technology[J]. Chinese Journal of Lasers, 47, 0701027(2020).

[2] Yang C, Li F K, Ren T et al. Fast and high quality composite processing method for silicon carbide wafers[J]. Acta Optica Sinica, 40, 1322001(2020).

[3] Jin S P, Fu Y G, Jin Y H et al. High-precision transmission-wavefront-processing technology of large aperture Ti: sapphire crystal at full spatial frequency[J]. Chinese Journal of Lasers, 46, 0903002(2019).

[4] Li M K, Xiang X S, Zhou C H et al. Two-dimensional grating fabrication based on ultra-precision laser direct writing system[J]. Acta Optica Sinica, 39, 0905001(2019).

[5] Kataoka I. An overview of ultralow-loss mirrors[J]. The Review of Laser Engineering, 24, 18-26(1996). http://jlc.jst.go.jp/DN/JALC/00038147036?from=CiNii

[6] Mullany B, Landis A, Williams W et al. Pitch polishing of silica: correlation between material removal rates and surface finishes[J]. Proceedings of SPIE, 1031, 103161H(2007).

[7] Namba Y, Ohnishi N, Yoshida S et al. Ultra-precision float polishing of calcium fluoride single crystals for deep ultra violet applications[J]. CIRP Annals, 53, 459-462(2004).

[8] Dietz R W, Bennett J M. Bowl feed technique for producing supersmooth optical surfaces[J]. Applied Optics, 5, 881-882(1966). http://www.opticsinfobase.org/ao/abstract.cfm?uri=ao-5-5-881

[9] Wakuda M, Yamauchi Y, Kanzaki S. Surface finishing of alumina ceramics by means of abrasive jet machining[J]. Journal of the American Ceramic Society, 85, 1306-1308(2002). http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.2002.tb00265.x

[10] Yang H, Song S P, Zhang S et al. Response time of flow transient process of magnetorheological finishing[J]. Laser & Optoelectronics Progress, 57, 032201(2020).

[11] Kanaoka M, Liu C L, Nomura K et al. Processing efficiency of elastic emission machining for low-thermal-expansion material[J]. Surface and Interface Analysis, 40, 1002-1006(2008). http://www.researchgate.net/publication/230313123_Processing_efficiency_of_elastic_emission_machining_for_lowthermalexpansion_material

[12] Liu B X, Jiao X, Tan X H et al. Effect of anionic modified polishing agent on Nd-doped phosphate laser glass polishing[J]. Chinese Journal of Lasers, 47, 1003001(2020).

[13] Wang Y N, Jiang S L, Sun G B et al. Ion beam polishing equivalent removal and polishing experiments[J]. Laser & Optoelectronics Progress, 57, 032501(2020).

[14] Yamamura K, Shimada S, Mori Y. Damage-free improvement of thickness uniformity of quartz crystal wafer by plasma chemical vaporization machining[J]. CIRP Annals, 57, 567-570(2008). http://www.sciencedirect.com/science/article/pii/S0007850608001029

[15] Song C, Tian Y, Shi F et al. Process optimization for cylindrical single-crystal silicon mirror with a tilted incident ion beam figuring[J]. Acta Optica Sinica, 40, 1222001(2020).

[16] Liu Y L, Zhang K L, Wang F et al. Investigation on the final polishing slurry and technique of silicon substrate in ULSI[J]. Microelectronic Engineering, 66, 438-444(2003). http://dl.acm.org/citation.cfm?id=783250

[17] Evans C J, Paul E, Dornfeld D et al. Material removal mechanisms in lapping and polishing[J]. CIRP Annals, 52, 611-633(2003).

[18] Hoshino T, Kurata Y, Terasaki Y et al. Mechanism of polishing of SiO2 films by CeO2 particles[J]. Journal of Non-Crystalline Solids, 283, 129-136(2001).

[19] Banerjee G, Rhoades R L. Chemical mechanical planarization historical review and future direction[J]. ECS Transactions, 13, 1-19(2008). http://www.researchgate.net/publication/266639581_Chemical_Mechanical_Planarization_Historical_Review_and_Future_Direction/download

[20] Chen J, Liu Y B, Wang J H et al. Analysis and experimental research on fused silica material characteristics[J]. Optical Technique, 44, 651-656(2018).

[21] Zarzycki J[M]. Glasses and the vitreous state, 279-280(1991).

[22] Chen G L, Liu D F, Chen T et al. Dispersion stability of CeO2 nano particles polishing agent and its properties in chemical mechanical polishing process[J]. Surface Technology, 45, 187-193(2016).

[23] Wei K H, Wang Y S, Liu C P et al. The influence of abrasive particle size in copper chemical mechanical planarization[J]. Surface and Coatings Technology, 231, 543-545(2013).

[24] Chuan J H, Wen X M, Hai Z H et al. Effect of OH - on chemical mechanical polishing of β-Ga2O3(100) substrate using an alkaline slurry[J]. The Royal Society of Chemistry Advances, 8, 6544-6550(2018). http://pubs.rsc.org/en/content/articlelanding/2018/ra/c7ra11570a/unauth

[25] Hua C X. Research on flowing features of slurry in chemical mechanical polishing[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2(2017).

[26] Jia R H, Wang Y, Wang Z H et al. Development of electrochemical mechanical polishing for advanced copper planarization[J]. ECS Transactions, 1, 125-133(2019). http://www.researchgate.net/publication/266634985_Development_of_Electrochemical_Mechanical_Polishing_for_Advanced_Copper_Planarization

[27] Li H B, Wang C W, Li H L et al. Chemical mechanical polishing of a fused silica glass based on the alkaline colloidal silica abrasive[J]. Micronanoelectronic Technology, 55, 135-142(2018). http://en.cnki.com.cn/Article_en/CJFDTotal-BDTQ201802010.htm

[28] Meng F N, Zhang Z Y, Gao P L et al. Research progress of chemical mechanical polishing slurry[J]. Surface Technology, 48, 1-10, 23(2019).

[29] Zhou Y, Pan G S, Gong H et al. Characterization of sapphire chemical mechanical polishing performances using silica with different sizes and their removal mechanisms[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 513, 153-159(2017).

[30] Song X L, Huang S T, Gong B Y et al. Synthesis of γ-Al2O3/CeO2 coated nanoparticles and dispersion stability of their suspension[J]. Integrated Ferroelectrics, 146, 76-87(2013). http://www.tandfonline.com/doi/ref/10.1080/10584587.2013.789721

[31] Sabia R, Stevens H J. Performance characterization of cerium oxide abrasives for chemical-mechanical polishing of glass[J]. Machining Science and Technology, 4, 235-251(2000).

[32] Cook L M. Chemical processes in glass polishing[J]. Journal of Non-Crystalline Solids, 120, 152-171(1990). http://www.sciencedirect.com/science/article/pii/0022309390902006

[33] Su J X. Study on material removal mechanism of wafer chemical mechanical polishing in IC manufacturing[D]. Dalian: Dalian University of Technology, 47(2006).

[34] Leistner A J, Thwaite E G, Lesha F et al. Polishing study using Teflon and pitch laps to produce flat and supersmooth surfaces[J]. Applied Optics, 31, 1472-1482(1992).

[35] Zhou Y. Study on surface finish control of ultra-smooth surface of optical components in precision polishing[D]. Changsha: Central South University, 32-33(2009).

[36] Preston F W[J]. The theory and design of plate glass polishing machine Society of Glass Technology, 1927, 214-256.

[37] Shi F G, Zhao B. Modeling of chemical-mechanical polishing with soft pads[J]. Applied Physics A, 67, 249-252(1998).

[38] Larsen J, Liang H. Probable role of abrasion in chemo-mechanical polishing of tungsten[J]. Wear, 233, 647-654(1999). http://www.sciencedirect.com/science/article/pii/S0043164899002483

[39] Zhao Y W, Chang L. A micro-contact and wear model for chemical-mechanical polishing of silicon wafers[J]. Wear, 252, 220-226(2002). http://www.sciencedirect.com/science/article/pii/S0043164801008717

[40] Greenwood J A. Williamson J B P. Contact of nominally flat surface[J]. Proceedings of the Royal Society of London, 295, 300-319(1996).

[41] Kuide Q, Moudgil B, Park C W. A chemical mechanical polishing model incorporating both the chemical and mechanical effects[J]. Thin Solid Films, 446, 277-286(2004).

[43] Runnels S R, Eyman L M. Tribology analysis of chemical-mechanical polishing[J]. Journal of the Electrochemical Society, 141, 1698-1701(1994). http://adsabs.harvard.edu/abs/1994JElS..141.1698R

[44] Runnels S R. Feature-scale fluid-based erosion modeling for chemical-mechanical polishing[J]. Journal of the Electrochemical Society, 141, 1900-1904(1994). http://www.researchgate.net/publication/234907356_FeatureScale_FluidBased_Erosion_Modeling_for_ChemicalMechanical_Polishing

[45] Liu R H. Development of SiO2 ILD chemical mechanical polishing slurry and its performance analysis[D]. Dalian: Dalian University of Technology, 21-22(2009).

[46] Sundararajan S, Thakurta D G, Schwendeman D W et al. Two-dimensional wafer-scale chemical mechanical planarization models based on lubrication theory and mass transport[J]. Journal of the Electrochemical Society, 146, 761-766(1999).

[47] Nakamura T, Akamatsu K, Arakawa N[2020-08-19]. Bowl feed and double sides polishing for silicon wafer for VLSI [2020-08-19].https://www.researchgate.net/publication/291822861_BOWL_FEED_AND_DOUBLE_SIDES_POLISHING_FOR_SILICON_WAFER_FOR_VLSI..

[48] Nelson C C[2020-08-19]. Simulations of spatially evolving compressible turbulence using a local dynamic subgrid model [2020-08-19].https://xueshu.baidu.com/usercenter/paper/show?paperid=b092e-98059323464aefff93bd7c38b51&site=xueshu_se..

[49] Thakurta D G, Borst C L, Schwendeman D W et al. Pad porosity, compressibility and slurry delivery effects in chemical-mechanical planarization: modeling and experiments[J]. Thin Solid Films, 366, 181-190(2000). http://www.sciencedirect.com/science/article/pii/S0040609000007483

[50] Lin J F, Chern J D, Chang Y H et al. Analysis of the tribological mechanisms arising in the chemical mechanical polishing of copper-film wafers[J]. Journal of Tribology, 126, 185-199(2004). http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=1467033

[51] Zhao D W, Wang T Q, He Y Y et al. Experimental studies on interfacial fluid lubrication and wafer status during chemical mechanical polishing of 12-inch wafer. [C]//International Conference on Planarization/CMP Technology. [S.l.:s.n.], 1-6(2012).

[52] Nguyen N Y, Tian Y B, Zhong Z W. Modeling and simulation for the distribution of slurry particles in chemical mechanical polishing[J]. The International Journal of Advanced Manufacturing Technology, 75, 97-106(2014).

[53] Landis A C[2020-08-19]. Factors influencing material removal and surface finish of the polishing of silica glasses [2020-08-19].https://www.researchgate.net/publication/277738231_Factors_Influencing_Material_Removal_And_Surface_Finish_Of_The_Polishing_Of_Silica_Glasses..

[54] Bakaev V A, Bakaeva T I, Pantano C G. A study of glass surface heterogeneity and silylation by inverse gas chromatography[J]. The Journal of Physical Chemistry B, 106, 12231-12238(2002). http://pubs.acs.org/doi/10.1021/jp0215926

[55] Yu J X, Chen L, Qian L M et al. Investigation of humidity-dependent nanotribology behaviors of Si(100)/SiO2 pair moving from stick to slip[J]. Applied Surface Science, 265, 192-200(2013). http://www.sciencedirect.com/science/article/pii/S0169433212019228

[56] Zhou Y, Pan G S, Shi X L et al. AFM and XPS studies on material removal mechanism of sapphire wafer during chemical mechanical polishing (CMP)[J]. Journal of Materials Science: Materials in Electronics, 26, 9921-9928(2015). http://www.istic.ac.cn/suoguan/detailed.htm?dbname=xw_qk&wid=0220160300543350

[57] Katsuki F, Kamei K, Saguchi A et al. AFM studies on the difference in wear behavior between Si and SiO2 in KOH solution[J]. Journal of the Electrochemical Society, 147, 2328-2331(2000). http://www.researchgate.net/publication/275401814_AFM_Studies_on_the_Difference_in_Wear_Behavior_Between_Si_and_SiOsub_2_in_KOH_Solution

[58] Katsuki F, Saguchi A, Takahashi W et al. The atomic-scale removal mechanism during Si tip scratching on Si and SiO2Surfaces in aqueous KOH with an atomic force microscope[J]. Japanese Journal of Applied Physics, 41, 4919-4923(2002).

[59] Katsuki F. Single asperity tribochemical wear of silicon by atomic force microscopy[J]. Journal of Materials Research, 24, 173-178(2009). http://journals.cambridge.org/abstract_S0884291400031216

[60] Shi X L, Xu L, Zhou Y et al. An in situ study of chemical-mechanical polishing behaviours on sapphire (0001) via simulating the chemical product-removal process by AFM-tapping mode in both liquid and air environments[J]. Nanoscale, 10, 19692-19700(2018).

[61] Shi X L, Chen G P, Xu L et al. Achieving ultralow surface roughness and high material removal rate in fused silica via a novel acid SiO2 slurry and its chemical-mechanical polishing mechanism[J]. Applied Surface Science, 500, 144041(2020).

[62] Luo J F, Dornfeld D A. Material removal mechanism in chemical mechanical polishing: theory and modeling[J]. IEEE Transactions on Semiconductor Manufacturing, 14, 112-133(2001).

[63] Nguyen V T, Fang T H. Material removal and wear mechanism in abrasive polishing of SiO2/SiC using molecular dynamics[J]. Ceramics International, 46, 21578-21595(2020). http://www.sciencedirect.com/science/article/pii/S0272884220315777

[64] Onodera T, Takahashi H, Nomura S. First-principles molecular dynamics investigation of ceria/silica sliding interface toward functional materials design for chemical mechanical polishing process[J]. Applied Surface Science, 530, 147259(2020). http://www.sciencedirect.com/science/article/pii/S016943322032016X