[1] Cheng J Y, Yen M H, Wei C W et al. Crack-free direct-writing on glass using a low-power UV laser in the manufacture of a microfluidic chip[J]. Journal of Micromechanics and Microengineering, 15, 1147-1156(2005). http://www.ingentaconnect.com/content/iop/jmm/2005/00000015/00000006/art00005

[2] Yang G S, Chen T, Chen H. The study on crack-free of silica glass micro-groove etched by 248 nm excimer laser[J]. Chinese Journal of Lasers, 44, 0902004(2017).

[3] Xing S L, Liu L, Zou G S et al. Effect of femtosecond laser parameters on hole drilling of silica glass[J]. Chinese Journal of Lasers, 42, 0403001(2015).

[4] Cheng Z, Guo W, Liu L et al. Mechanical properties of microweld of silica glass to silica by femtosecond laser[J]. Chinese Journal of Lasers, 42, 0906004(2015).

[5] Wu D J, Zhou S Y, Ma G Y et al. Experiment of quartz glass flute precise thinning by femtosecond laser[J]. Chinese Journal of Lasers, 42, 0303009(2015).

[6] Yoshizo K, Hiroyuki N, Tadatake S et al. A deep micro-trench on silica glass fabricated by laser induced backside wet etching (LIBWE)[J]. Journal of Physics, 59, 380-383(2007). http://adsabs.harvard.edu/abs/2007JPhCS..59..380K

[7] Wang S. A study on laser etching and polishing quartz glass technology[D]. Wuhan: Huazhong University of Science and Technology, 4-5(2012).

[8] Huang Y Y, Qian J, Shao C Y et al. Femtosecond laser induced defects in pure silica glass with different hydroxyl concentration[J]. Chinese Journal of Lasers, 44, 0102011(2017).

[9] Hao Y F, Sun M Y, Shi S et al. Research on rear surface damage in picosecond laser ablation of K9 glass[J]. Chinese Journal of Lasers, 44, 0102015(2017).

[10] Dai Y T, Xu G, Cui J L. 3D micro ablation technique of transparent materials using deep ultraviolet laser[J]. Applied Laser, 29, 411-414(2009).

[11] Zhang J, Sugioka K, Takahashi T et al. Dual-beam ablation of fused silica by multiwavelength excitation process using KrF excimer and F2 lasers[J]. Applied Physics A: Materials Science and Processing, 71, 23-26(2000). http://link.springer.com/article/10.1007/PL00021086

[13] Lorenz P, Ehrhardt M, Zimmer K. Laser-induced front side etching of quartz glass with KrF excimer laser using thin chromium layers[J]. Applications and Material Science, 209, 1114-1118(2012). http://onlinelibrary.wiley.com/doi/10.1002/pssa.201127672/full

[14] Hamdani A H, Ansar A, Akhter R et al[J]. quartz in vacuum. Key Engineering Materials, 510/511, 261-264(2012).

[15] Zimmer K, Böhme R, Ruthe D et al. Backside laser etching of quartz glass using liquid gallium[J]. Applied Physics A: Materials Science and Processing, 84, 455-458(2006).

[16] Tsvetkova M Y, Yusupova V I, Minaeva N V et al. On the mechanisms of single-pulse laser-induced backside wet etching[J]. Optics & Laser Technology, 88, 17-23(2017). http://www.sciencedirect.com/science/article/pii/S0030399215306149

[17] Nieto D, Cambronero F. Flores-Arias M T, et al. Aluminum thin film enhanced IR nanosecond laser-induced frontside etching of transparent materials[J]. Optics and Lasers in Engineering, 88, 233-242(2017). http://www.sciencedirect.com/science/article/pii/S0143816616301919

[18] Lan B, Hong M H, Ye K D et al. Laser precision engineering of glass substrates[J]. Japanese Journal of Applied Physics, 43, 7102-7106(2004). http://adsabs.harvard.edu/abs/2004JaJAP..43.7102L

[19] Ihlemann J, Wolff B, Simon P. Nanosecond and femtosecond excimer laser ablation of fused glass[J]. Applied Physics A: Materials Science and Processing, 54, 363-368(1992). http://link.springer.com/article/10.1007/BF00324203