[1] Tiamiyu A A, Odeshi A G, Szpunar J A. Multiple strengthening sources and adiabatic shear banding during high strain-rate deformation of AISI 321 austenitic stainless steel: effects of grain size and strain rate[J]. Materials Science and Engineering: A, 711, 233-249(2018).

[2] Wang J, Lin Y H, Yan J et al. Influence of time on the microstructure of AISI 321 austenitic stainless steel in salt bath nitriding[J]. Surface and Coatings Technology, 206, 3399-3404(2012).

[3] Chen Y Y, Liou Y M, Shih H C. Stress corrosion cracking of type 321 stainless steels in simulated petrochemical process environments containing hydrogen sulfide and chloride[J]. Materials Science and Engineering: A, 407, 114-126(2005).

[4] Fattah-Alhosseini A. Passivity of AISI 321 stainless steel in 0.5M H2SO4 solution studied by Mott-Schottky analysis in conjunction with the point defect model[J]. Arabian Journal of Chemistry, 9, S1342-S1348(2016).

[5] Ping X L, Fu H G, Sun S T. Progress in preparation of hard phase reinforced Ni-based alloy composite coating by laser cladding[J]. Materials Reports, 33, 1535-1540(2019).

[6] Tan J H, Sun R L, Niu W et al. Research status of TC4 alloy laser cladding materials[J]. Materials Reports, 34, 15132-15137(2020).

[7] Li M Y, Han B, Song L X et al. Enhanced surface layers by laser cladding and ion sulfurization processing towards improved wear-resistance and self-lubrication performances[J]. Applied Surface Science, 503, 144226(2020).

[8] Qi K, Yang Y, Liang W X et al. Effect of magnetic field on the microstructure and wear properties of TiB2/metal composite layers synthesized in situ by laser cladding on Ti-6Al-4V alloy[J]. Ceramics International, 47, 29463-29474(2021).

[9] Sun B, Cheng J B, Cai Z H et al. Formation and wear property of broad-beam laser clad Fe-based coatings[J]. Surface and Coatings Technology, 405, 126598(2021).

[10] Wang S, Shao S C, Bi S P et al. Study on microstruc ture and properties of laser cladding Fe-based alloy layer on TC4 surface[J]. Laser Technology, 46, 653-656(2022).

[11] Gong M M, Xie L Y, Wu T et al. Study on the properties of laser cladding Fe60-TiO2 coating on TC4 surface[J]. Laser Technology, 46, 551-555(2022).

[12] Xu Z F, Jiao J K, Zhang Z et al. Research on laser repair process of Ni-based superalloy[J]. Materials Reports, 33, 3196-3202(2019).

[13] Zhou J B, Zhang J, Zhang L T et al. Effect of laser process parameters on crack rate and microstructure of Ni60/WC clad coating[J]. Heat Treatment of Metals, 46, 252-257(2021).

[14] Huang H B, Sun W L. Influence of laser cladding process parameters on crack and thickness of Ni60[J]. Laser Technology, 45, 788-793(2021).

[15] Zhao S B, Jia C P, Yuan Y X et al. Effects of laser remelting on microstructural characteristics of Ni-WC composite coatings produced by laser hot wire cladding[J]. Journal of Alloys and Compounds, 908, 164612(2022).

[16] Zhou H, Lin Y H, Chen H et al. Study on the preparation and friction and wear properties of laser cladding Ni60 alloy on Cr12MoV steel[J]. Materials Reports, 37, 391-395(2023).

[17] Chong Z Z, Sun Y N, Cheng W J et al. Laser remelting induces grain refinement and properties enhancement in high-speed laser cladding AlCoCrFeNi high-entropy alloy coatings[J]. Intermetallics, 150, 107686(2022).

[18] Xi W C, Song B X, Wang Z et al. Forming characteristics and powder effective utilization research of surface cladding process[J]. Surface Technology, 48, 211-218(2019).

[19] Ye S Y, Liu J Y, Yang W. Quality of H13 alloy coating on H13 steel prepared by laser cladding[J]. Surface Technology, 44, 81-85, 125(2015).

[20] Sun Y S, Han Y, Zhang Y et al. Microstructure of 304 stainless steel fabricated by laser cladding[J]. Laser & Optoelectronics Progress, 59, 1114001(2022).

[21] Liu Y F, Zhuang S G, Liu X B et al. Microstructure evolution and high-temperature tribological behavior of Ti3SiC2 reinforced Ni60 composite coatings on 304 stainless steel by laser cladding[J]. Surface and Coatings Technology, 420, 127335(2021).

[22] Wu X L, An F J, Li D R et al. Study on microstructure and properties of laser cladding Ni60+WC powder coating[J]. Applied Laser, 43, 1-8(2023).

[23] Qin M J, Sun W L, Guan W H et al. Analysis on organization and properties of laser clad Inconel625 coating on 304 stainless steel surface[J]. Surface Technology, 53, 141-151(2024).

[24] Huang G C, Guo C, Li Y et al. Effect of Y2O3 addition on microstructure properties of FeCoNiCuAl high-entropy alloy coatings prepared by laser cladding[J]. Surface Technology, 53, 163-172(2024).