[1] Hanafusa A, Ando S, Yuge T et al. Epoxy resins containing epoxy-modified polyrotaxanes[J]. Polymer, 278, 126007(2023).

[2] Liang X, Li X J, Tang Y et al. Hyperbranched epoxy resin-grafted graphene oxide for efficient and all-purpose epoxy resin modification[J]. Journal of Colloid and Interface Science, 611, 105-117(2022).

[3] Krasovskii A N, Novikov D V, Krasheninnikov V A et al. Cluster model of aggregation of epoxy-DPP oligomers in solutions. structure of coatings based on epoxy and epoxy-phenol resins[J]. Russian Journal of Applied Chemistry, 74, 131-141(2001).

[4] Kumar A, Prasad M, Bhatt R B et al. A comparative study on laser induced shock cleaning of radioactive contaminants in air and water[J]. Optics Laser Technology, 100, 133-138(2018).

[5] Park J J. Effect of organic solvents on the electrical properties of a neat epoxy resin system[J]. Transactions on Electrical and Electronic Materials, 13, 89-92(2012).

[6] Xin D R, Han Q. A molecular dynamics investigation on the compression of cross-linked epoxy resins[J]. Molecular Simulation, 41, 1509-1514(2015).

[7] Sham M L, Kim J K. Evolution of residual stresses in modified epoxy resins for electronic packaging applications[J]. Composites Part A: Applied Science and Manufacturing, 35, 537-546(2004).

[8] Li Y B, Zhang Z G. Curing of epoxy resin induced by femtosecond laser pulse[J]. Journal of Wuhan University of Technology-Materials Science Edition, 20, 65-68(2005).

[9] Liu J G, Chen C H, Zheng J S et al. CO2 laser direct writing of silver lines on epoxy resin from solid film[J]. Applied Surface Science, 245, 155-161(2005).

[10] Veltrup M, Lukasczyk T, Ihde J et al. Distribution and avoidance of debris on epoxy resin during UV ns-laser scanning processes[J]. Applied Surface Science, 440, 1107-1115(2018).

[11] Yang X R, Jiang L, Li M. Modeling continuous laser ablation of glass fiber-reinforced epoxy resin plate with two-dimensional finite element[J]. Journal of Thermal Analysis and Calorimetry, 148, 10583-10594(2023).

[12] Zhang Y Q, Zhang L, Tan F L et al. Effect of laser irradiation on morphology and dielectric properties of quartz fiber reinforced epoxy resin composite[J]. e-Polymers, 21, 734-741(2021).

[13] Yang Y, Tian X C, Ma Z et al. Laser irradiation behavior of carbon fiber epoxy resin composites with laminar structure[J]. Crystals, 12, 1767(2022).

[14] Yu J, Cai C, Xie J et al. Process parameter optimization for laser-arc hybrid welding of low-carbon bainite steel based on response surface methodology[J]. Chinese Journal of Lasers, 49, 1602018(2022).

[15] Liang H Z, Li C J, Huang T et al. Optimization of laser direct connection process between TC4 and PBTCF30[J]. Laser Optoelectronics Progress, 60, 2114003(2023).

[16] Hou H L, Hao H L, Lü R H et al. Parameter optimization and performance test of laser cutting of carbon fiber reinforced plastics based on response surface method[J]. Laser Optoelectronics Progress, 59, 1314005(2022).

[17] Bulgakova N M, Bulgakov A V. Pulsed laser ablation of solids: transition from normal vaporization to phase explosion[J]. Applied Physics A, 73, 199-208(2001).

[18] Boyer K, Malone R C, McCrory R L et al. Indications of strongly flux-limited electron thermal conduction in laser target experiments[J]. The Review of Laser Engineering, 2, 283-291(1974).

[19] Huang S, Chen R, Zhang H et al. A study of welding process in connecting borosilicate glass by picosecond laser pulses based on response surface methodology[J]. Optics Laser Technology, 131, 106427(2020).

[20] Acherjee B, Misra D, Bose D et al. Prediction of weld strength and seam width for laser transmission welding of thermoplastic using response surface methodology[J]. Optics Laser Technology, 41, 956-967(2009).

[21] Chen Y J, Lu W T, Yang Y T. Optimization of laser paint removal process for carbon fiber composite substrate based on response surface analysis[J]. Chinese Journal of Lasers, 50, 1202208(2023).

[22] Sun X W, Zhang Z, Yang H R et al. Optimization of laser cleaning process parameters for petroleum pipe threads based on response surface method and particle swarm algorithm[J]. Chinese Journal of Lasers, 49, 2202001(2022).

[23] He T L, Jia Q Z, Liu M H. Study and prediction simulation of residual stress on grinding surface of zirconia ceramic material[J]. Development Innovation of Machinery Electrical Products, 36, 106-109(2023).