[1] Wu Z H. Empirical modeling for processing parameters’ effects on coating properties in plasma spraying process[J]. Journal of Manufacturing Processes, 19, 1-13(2015).

[2] Feng C, Guipont V, Jeandin M et al. B4C/Ni composite coatings prepared by cold spray of blended or CVD-coated powders[J]. Journal of Thermal Spray Technology, 21, 561-570(2012).

[3] Zhao S B, Yang L J, Huang Y M et al. Feasibility study of producing Ni/WC composite coatings by laser deposition with a tubular cored wire[J]. Journal of Materials Processing Technology, 285, 116745(2020).

[4] Ge T, Chen L, Gu P F et al. Microstructure and properties improvement of TiC/inconel 625 composite coatings using extreme high-speed laser cladding[J]. Laser & Optoelectronics Progress, 60, 0514002(2023).

[5] Zhang H Q, Liu H, Liu Y et al. Research status and analysis of co-based composite coatings prepared by laser cladding[J]. Laser & Optoelectronics Progress, 60, 0900004(2023).

[6] Yang S R, Bai H Q, Li C F et al. Numerical simulation and regression orthogonal experiment optimization of laser cladding of nickel-based superalloy[J]. Laser & Optoelectronics Progress, 60, 0514008(2023).

[7] Yang L J, Wang S P, Wang P et al. Microstructural evolution and abrasive resistance of WC7Co ceramic particle-reinforced Ti6Al4V composite coating prepared by pulse laser cladding[J]. Journal of Iron and Steel Research International, 27, 228-237(2020).

[8] Tian J J, Yao S W, Luo X T et al. An effective approach for creating metallurgical self-bonding in plasma-spraying of NiCr-Mo coating by designing shell-core-structured powders[J]. Acta Materialia, 110, 19-30(2016).

[9] Zhu M, Yang Q, Wang B et al. Effect of laser parameters on melting behavior of powders in off-axis laser cladding process[J]. Laser & Optoelectronics Progress, 60, 0116002(2023).

[10] Yang Y C, Jin X, Liu C M et al. Residual stress, mechanical properties, and grain morphology of Ti-6Al-4V alloy produced by ultrasonic impact treatment assisted wire and arc additive manufacturing[J]. Metals, 8, 934(2018).

[11] Zhang Y Z, Ge H H, Jin C Y et al. Distribution mechanism of Cr element during laser cladding overlapping process of 316L powder on 45 steel substrate[J]. Chinese Journal of Lasers, 50, 0802204(2023).

[12] Shamsaei N, Yadollahi A, Bian L K et al. An overview of Direct Laser Deposition for additive manufacturing; Part II: mechanical behavior, process parameter optimization and control[J]. Additive Manufacturing, 8, 12-35(2015).

[13] Bartkowski D, Młynarczak A, Piasecki A et al. Microstructure, microhardness and corrosion resistance of Stellite-6 coatings reinforced with WC particles using laser cladding[J]. Optics & Laser Technology, 68, 191-201(2015).

[14] Chai C, Li X M, Wang S C et al. Microstructure and properties of laser cladding SiC reinforced Ni35 alloy layer[J]. Materials for Mechanical Engineering, 45, 58-61, 66(2021).

[15] Zhang M L, Tang W B, Li B Q et al. Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding[J]. Heat Treatment of Metals, 47, 200-205(2022).

[16] Man H C, Yang Y Q, Lee W B. Laser induced reaction synthesis of TiC+WC reinforced metal matrix composites coatings on Al6061[J]. Surface and Coatings Technology, 185, 74-80(2004).

[17] Kılıçay K, Buytoz S, Ulutan M. Microstructural and tribological properties of induction cladded NiCrBSi/WC composite coatings[J]. Surface and Coatings Technology, 397, 125974(2020).

[18] Yuan J J, Wang Q Z, Liu X Y et al. Microstructures and high-temperature wear behavior of NiAl/WC-Fex coatings on carbon steel by plasma cladding[J]. Journal of Alloys and Compounds, 842, 155850(2020).