[1] Lu H F, Cai J, Luo K Y et al. Thermal fatigue life and improvement mechanism of Fe-based coatings on H13 extrusion die by laser additive remanufacturing[J]. Surface and Coatings Technology, 408, 126808(2021).

[2] Cao J, Lu H F, Lu J Z et al. Effects of tungsten carbide particles on microstructure and wear resistance of hot-working die prepared via laser cladding[J]. Chinese Journal of Lasers, 46, 0702001(2019).

[3] Zhang M L, Li C, Gao Q et al. The effect of heat treatment on microstructure and properties of laser-deposited TiC reinforced H13 steel matrix composites[J]. Optik, 206, 164286(2020).

[4] Wang Y L, Zhong Y H, Li F H et al. Influence of laser remanufacturing process parameters on single-pass forming characteristics of H13 steel powder[J]. Laser & Infrared, 51, 871-876(2021).

[5] Li H B, Gao Q Q, Li K Y et al. Properties of surface laser cladding H13/NiCr-Cr3C2 composite powder cladding layer[J]. Chinese Journal of Lasers, 48, 1802017(2021).

[6] Chang Q C, Ren L B, Liu Y et al. Microstructure and high temperature wear resistance of laser cladding NbC/Ni60 composite coating on H13 die steel[J]. Surface Technology, 53, 108-114(2024).

[7] DebRoy T, Wei H L, Zuback J S et al. Additive manufacturing of metallic components: process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).

[8] Chang G R, Liu M X, Meng Y et al. Study of WC microalloying behavior and tribological property of homogeneous laser cladding layer on H13 steel[J]. Materials Reports, 37, 161-166(2023).

[9] Zhang X C, Pan T, Li W et al. Experimental characterization of a direct metal deposited cobalt-based alloy on tool steel for component repair[J]. JOM, 71, 946-955(2019).

[10] Zhou Q S, Sun W L, Zhang T et al. Study on microstructure, wear resistance and corrosion properties of 321 stainless steel surface Ni60/WC coating by high speed laser cladding[J]. Laser & Optoelectronics Progress, 62, 0714002(2025).

[11] Liu L J, Liu D Y, Wang X L et al. Parameter optimization of laser cladding ceramic repair layer for H13 steel[J]. Transactions of the China Welding Institution, 41, 65-70, 100(2020).

[12] Kattire P, Paul S, Singh R et al. Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications[J]. Journal of Manufacturing Processes, 20, 492-499(2015).

[13] Yang D, Ning Y H, Zhao Y G et al. Influence of processing parameter on microstructure, wear-resistance and corrosion-resistance of laser cladding Ni-based alloy on the surface of 304 stainless steel[J]. Materials Review, 31, 133-140(2017).

[14] Gu X K, Du M H, Wang J H et al. Effects of broad-beam laser cladding of Cr12MoV powder on roll body[J]. Laser Journal, 45, 188-196(2024).

[15] Du Y B, Hu Y F, Xu L et al. Prediction method for dilution rate of laser cladding layer of 15-5PH alloy powder based on PSO-SVR[J]. Computer Integrated Manufacturing Systems, 28, 2169-2178(2022).

[16] Du Y B, Zhang W P, Liang Q et al. Optimization method of laser cladding process parameters based on CWOA[J]. Computer Integrated Manufacturing Systems, 30, 4328-4338(2024).

[17] Singh A K, Bal K S, Dey D et al. Experimental investigation and parametric optimization for minimization of dilution during direct laser metal deposition of tungsten carbide and cobalt powder mixture on SS304 substrate[J]. Powder Technology, 390, 339-353(2021).

[18] Ma M Y, Xiong W J, Lian Y et al. Modeling and optimization for laser cladding via multi-objective quantum-behaved particle swarm optimization algorithm[J]. Surface and Coatings Technology, 381, 125129(2020).

[19] Zhao D D, Jiao F. Optimization of laser cladding process parameters of 35CrMoV piston rod based on grey correlation analysis[J]. Acta Armamentarii, 39, 2073-2080(2018).

[20] Yao X Y, Lin Q, Ding H H et al. Optimization of process parameters of Ni60+WC laser cladding coating based on Taguchi-grey relation method[J]. Surface Technology, 52, 394-405, 465(2023).

[21] Yang K X, Sun W L, Xiao Q et al. Optimization of laser process parameters of Fe06-15%TiC cladding layer based on Taguchi grey correlation method[J]. Materials Reports, 36, 182-190(2022).

[22] Lian G, Zhang H, Zhang Y et al. Optimizing processing parameters for multi-track laser cladding utilizing multi-response grey relational analysis[J]. Coatings, 9, 356(2019).

[23] Telasang G, Majumdar J D, Padmanabham G et al. Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel[J]. Surface and Coatings Technology, 258, 1108-1118(2014).

[24] Ye S Y, Liu J Y, Yang W. Quality of H13 alloy coating on H13 steel prepared by laser cladding[J]. Surface Technology, 44, 81-85, 125(2015).

[25] Hu Y F, Du Y B, Xu L et al. Optimization method of processing parameters in laser cladding by integrating response surface methodology and particle swarm optimization[J]. Mechanical Science and Technology for Aerospace Engineering, 42, 629-637(2023).

[26] Xu G T, Yang W, Liu H L et al. Numerical simulation and experiment of dilution ratio for electron beam cladding of Inconel 718 alloy[J]. Rare Metal Materials and Engineering, 52, 3047-3055(2023).

[27] Graf K, Tetzlaff U, de Souza G B et al. Effect of dilution on the microstructure and properties of CoCrMoSi alloy coatings processed on high-carbon substrate[J]. Materials Research, 22, e20180502(2018).

[28] Liu X D, Qin Y X, Liu J et al. Research on parabolic band integrating mirror for high-power large-width rectangular laser beams[J]. Laser & Optoelectronics Progress, 56, 191403(2019).

[29] Zhu G X, Zhang A F, Li D C. Effect of process parameters on surface smoothness in laser cladding[J]. Chinese Journal of Lasers, 37, 296-301(2010).