[1] PAN Y C, SANG M, ZHANG J S et al. Flexible and lightweight Kevlar composites towards flame retardant and impact resistance with excellent thermal stability[J]. Chemical Engineering Journal, 452, 139565(2023).

[2] SATHISHKUMAR T P, MURALIDHARAN M, RAMAKRISHNAN S et al. Mechanical strength retention and service life of Kevlar fiber woven mat reinforced epoxy laminated composites for structural applications[J]. Polymer Composite, 42, 1855-1866(2021).

[3] LI Wei, CAO Yingmin, ZHANG Dianzi et al. Study on composites reinforced with short aramid fiber[J]. Engineering Plastics Application, 38, 86-88(2010).

[4] GU D, DUAN C S, FAN B L et al. Tribological properties of hybrid PTFE/Kevlar fabric composite in vacuum[J]. Tribology International, 103, 423-431(2016).

[5] KARVANIS K, RUSNAKOVA S, KREJI O et al. Thermal analysis of postcured aramid fiber/epoxy composites[J]. Reviews on Advanced Materials Science, 60, 479-489(2021).

[6] VEDANARAYANAN V, KUMAR B S P, KARUNA M S et al. Experimental investigation on mechanical behaviour of Kevlar and ramie fibre reinforced epoxy composites[J]. Journal of Nanomaterials, 2022, 8802222(2022).

[7] ZHOU J Y, ZHANG J S, SANG M et al. Advanced functional Kevlar composite with excellent mechanical properties for thermal management and intelligent safeguarding[J]. Chemical Engineering Journal, 428, 131878(2022).

[8] ZHANG Xiongbin, HE Xinhai, CHENG Jiaji. Research progress on surface modification of aramid fibers and preparation of their reinforced resin matrix composites[J]. Engineering Plastics Application, 46, 149-153(2018).

[9] MIAO Yajing, YANG Dan, XIN Binjie. Anti-ballistic properties of aramid fabrics and composites: a review[J]. AATCC Journal of Research, 8, 20-27(2021).

[10] WANG H M, WANG H M, WANG Y L et al. Laser writing of Janus graphene/Kevlar textile for intelligent protective clothing[J]. ACS Nano, 14, 3219-3226(2020).

[11] RAO Y F, YUAN M, GAO B et al. Laser-scribed phosphorus-doped graphene derived from Kevlar textile for enhanced wearable micro-supercapacitor[J]. Journal of Colloid and Interface Science, 630, 586-594(2023).

[12] ZHANG Xuecong, QIAN Jing, FU Qiang et al. Cutting of PBO fiber-reinforced composites using picosecond lasers[J]. Chinese Journal of Lasers, 47, 63-72(2020).

[13] WANG Jinyu, LIU Haibo, LIU Kuo et al. Experiment of liquid nitrogen cooling drilling test of aramid fiber-reinforced polymer composite[J]. Acta Materiae Compositae Sinica, 37, 89-95(2020).

[14] LIU S N, GONG K, ZHAO J et al. Multi‑objective optimisation of cutting parameters for drilling‑induced damages and thrust force in AFRP drilling[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 562(2022).

[15] SHI Wentian, PANG Qingchao, LIU Yude et al. Study on surface defects mechanism and process tests of aramid fiber composite hole-making[J]. Surface Technology, 51, 184-191(2022).

[16] SU Fei, LI Chunjie, LI Wenyi et al. Research on the feasibility and machining experiment of the laser-milling combination machining for Kevlar fiber reinforced composite[J]. Acta Materiae Compositae Sinica, 38, 3543-3553(2021).

[17] BAHARLOOEY D, ABOOTORABI M M. Defects in the Kevlar-epoxy thin layer sheet drilling with different machining strategies[J]. Polymers and Polymer Composites, 29, 909-918(2021).

[18] YILBAS B S, AKHTAR S S, KARATAS C. Laser circular cutting of Kevlar sheets: analysis of thermal stress filed and assessment of cutting geometry[J]. Optics and Laser Technology, 96, 180-189(2017).

[19] HERZOG D, SCHMIDT-LEHR M, OBERLANDER M et al. Laser cutting of carbon fibre reinforced plastics of high thickness[J]. Materials and Design, 92, 742-749(2016).

[20] GAUTAM G D, MISHRA D R. Dimensional accuracy improvement by parametric optimization in pulsed Nd:YAG laser cutting of Kevlar-29/basalt fiber-reinforced hybrid composites[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, 284(2019).

[21] PRAJAPATI A, NORKEY G, GAUTAM G D. Optimization of heat affected zone in laser cutting of Kevlar-29 fiber composite using hybrid Response Surface based Grey Wolf Optimization (RSGWO) algorithm[J]. Proceedings of the Institution of Mechanical Engineers, 236, 9622-9638(2022).

[22] JIA Baoshen, TANG Hongping, SU Chunzhou et al. Removal of surface coating of resin matrix composites by pulsed laser[J]. Chinese Journal of Lasers, 46, 133-140(2019).

[23] TAGLIAFERRI V, DI I A, CRIVELLI V I. Laser cutting of fibre-reinforced polyesters[J]. Composites, 16, 317-325(1985).

[24] BACHY B, AL-DUNAINAWI Y. Influence of the effective parameters on the quality of laser micro-cutting process: experimental analysis, modeling and optimization[J]. Journal of Laser Applications, 32, 012002(2020).

[25] CHENG J, ZHANG P, HE Z T et al. Characteristics of ultrafast laser processing aramid fiber reinforced plastics[J]. Journal of Reinforced Plastics and Composites, 41, 893-901(2022).

[26] MOGHADASI K, TAMRIN K F. Experimental investigation and parameter optimization of low power CO2 laser cutting of a carbon/kevlar fibre-reinforced hybrid composite[J]. Lasers in Engineering, 45, 85-108(2020).

[27] SUGIOKA K. Progress in ultrafast laser processing and future prospects[J]. Nanophotonics, 6, 393-413(2017).

[28] PAUL S, KUDRYASHOV S I, LYON K et al. Nanosecond-laser plasma-assisted ultradeep microdrilling of optically opaque and transparent solids[J]. Journal of Applied Physics, 101, 043106(2007).

[29] YANG Jian, ZHANG Rui, ZHAO Yu et al. Experimental study on picosecond laser cutting AFRP composites[J]. Acta Materiae Compositae Sinica, 39, 147-157(2022).

[30] SU Fei, LI Wenyi, DONG Guojun et al. Theoretical modeling and experimental study on nanosecond laser machining of Kevlar fiber reinforced plastics[J]. Acta Materiae Compositae Sinica, 39, 4139-4151(2022).

[31] WANG Guibing, LUO Fei, LIU Cangli et al. The research of the ablation morphology of the composite reinforced by poly aryl amide fibers irradiated by laser[J]. Laser Technology, 168-169,180(2006).