[1] Everton S K, Hirsch M, Stravroulakis P et al. Review of in situ process monitoring and in situ metrology for metal additive manufacturing[J]. Materials & Design, 95, 431-445(2016).

[2] Doubenskaia M, Domashenkov A, Smurov I et al. Study of selective laser melting of intermetallic TiAl powder using integral analysis[J]. International Journal of Machine Tools and Manufacture, 129, 1-14(2018).

[3] Fosness E, Carpenter B, Tupper M et al. Development of low shock deployment devices for aerospace applications using shape memory and elastic memory composites. [C]∥AIAA Space 2003 Conference & Exposition, Long Beach, California. Reston, Virigina: AIAA, 6246(2003).

[4] Shangguan H L, Kang J W, Deng C Y et al. 3D-printed shell-truss sand mold for aluminum castings[J]. Journal of Materials Processing Technology, 250, 247-253(2017).

[5] Upadhyay M, Sivarupan T, El Mansori M. 3D printing for rapid sand casting: a review[J]. Journal of Manufacturing Processes, 29, 211-220(2017).

[6] National Technical Committee on Additive Manufacturing of Standardization Administration of China,. Additive manufacturing—(2017).

[7] Frazier W E. Metal additive manufacturing: a review[J]. Journal of Materials Engineering and Performance, 23, 1917-1928(2014).

[8] Do T, Kwon P, Shin C S. Process development toward full-density stainless steel parts with binder jetting printing[J]. International Journal of Machine Tools and Manufacture, 121, 50-60(2017).

[9] Ziaee M, Crane N B. Binder jetting: a review of process, materials, and methods[J]. Additive Manufacturing, 28, 781-801(2019).

[10] Zhang Y, Wu LM, Guo X Y et al. Additive manufacturing of metallic materials: a review[J]. Journal of Materials Engineering and Performance, 27, 1-13(2018).

[11] Shellabear M, Nyrhilä O[2020-03-28]. DMLS-development history and state of the art [2020-03-28].https:∥scholar.google.com/scholar?q=DMLS-Development+history+and+state+of+the+art&hl=en&as_sdt=, 0, 5.

[12] Wang Y B, Li J Y. Status and development tendency of high power ytterbium doped fibers[J]. Chinese Journal of Lasers, 44, 0201009(2017).

[13] Boddu M R, Landers R G, Liou F W[2020-03-28]. Control of laser cladding for rapid prototyping: a review [2020-03-28].http:∥edge.rit.edu/content/P10551/public/SFF/SFF%202001%20Proceedings/2001%20SFF%20Papers/52-Boddu,Control.pdf..

[14] Kaierle S, Barroi A, Noelke C et al. Review on laser deposition welding: from micro to macro[J]. Physics Procedia, 39, 336-345(2012).

[15] Fomin V, Gapontsev V, Shcherbakov E et al. Saint Petersburg, Russia. [S.l.]:. IEEE, 20146886450(2014).

[16] Wu W J, Chen Z L, Wang Z F et al. Beam combining of fiber lasers by a 3×1 signal combiner at a power >13 kW[J]. Optical Fiber Technology, 54, 102109(2020).

[17] Hudson D D. Invited paper: short pulse generation in mid-IR fiber lasers[J]. Optical Fiber Technology, 20, 631-641(2014).

[18] Xie Z X, Shi C D, Sheng Q et al. A single-frequency 1064-nm Yb 3+ -doped fiber laser tandem-pumped at 1018 nm[J]. Optics Communications, 461, 125262(2020).

[19] Addanki S, Amiri I S, Yupapin P. Review of optical fibers-introduction and applications in fiber lasers[J]. Results in Physics, 10, 743-750(2018).

[20] Lee H. Lim C H J, Low M J, et al. Lasers in additive manufacturing:a review[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 4, 307-322(2017).

[21] Gong X D, Wang Z, Yu N et al. Research progress of polymer powder materials for SLS forming technology[J]. Journal of Functional Materials, 50, 10027-10039(2019).

[22] Lin F[J]. Research progress and prospect of electron beam powder bed fusion technology New Economy Leader, 2019, 35-39.

[23] Zhao D C, Lin F. A review of on-line monitoring techniques in metal powder bed fusion processes[J]. China Mechanical Engineering, 29, 2100-2110, 2118(2018).

[24] Tolochko N K, Khlopkov Y V, Mozzharov S E et al. Absorptance of powder materials suitable for laser sintering[J]. Rapid Prototyping Journal, 6, 155-161(2000).

[25] Garban-Labaune C, Fabre E, Max C E et al. Effect of laser wavelength and pulse duration on laser-light absorption and back reflection[J]. Physical Review Letters, 48, 1018(1982).

[26] Wang W, Tang X H, Qin Y X et al. Influence of resonator mirror surfaces on output mode of radio frequency slab CO2 lases[J]. Chinese Journal of Lasers, 43, 0402004(2016).

[27] Yang Y Q, Chen J, Song C H et al. Current status and progress on technology of selective laser melting of metal parts[J]. Laser & Optoelectronics Progress, 55, 011401(2018).

[28] Bai Y C, Yang Y Q, Wang D et al. Selective laser melting of tin bronze alloy and its properties[J]. Rare Metal Materials and Engineering, 47, 1007-1012(2018).

[29] Bai Y C, Wang D, Yang Y Q et al. Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting[J]. Materials Science and Engineering: A, 760, 105-117(2019).

[30] Song C H, Yang Y Q, Wang Y D et al. Research on process and property of CoCrMo alloy directly manufactured by selective laser melting[J]. Chinese Journal of Lasers, 41, 0603001(2014).

[31] Sun J F, Yang Y Q, Wang D. Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method[J]. Optics & Laser Technology, 49, 118-124(2013).

[32] Liu J W, Song Y N, Chen C Y et al. Effect of scanning speed on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting[J]. Materials & Design, 186, 108355(2020).

[33] Bi J, Lei Z L, Chen Y B et al. Microstructure and mechanical properties of a novel Sc and Zr modified 7075 aluminum alloy prepared by selective laser melting[J]. Materials Science and Engineering: A, 768, 138478(2019).

[34] Wei K, Yang Q D, Ling B et al. Mechanical properties of Invar 36 alloy additively manufactured by selective laser melting[J]. Materials Science and Engineering: A, 772, 138799(2020).

[35] Montero-Sistiaga M L, Godino-Martinez M, Boschmans K et al. Microstructure evolution of 316L produced by HP-SLM (high power selective laser melting)[J]. Additive Manufacturing, 23, 402-410(2018).

[36] Rafi H K, Karthik N V, Gong H J et al. Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting[J]. Journal of Materials Engineering and Performance, 22, 3872-3883(2013).

[37] Read N, Wang W, Essa K et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development[J]. Materials & Design (1980—2015), 65, 417-424(2015).

[38] Simonelli M, Tse Y Y, Tuck C. Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6Al-4V[J]. Materials Science and Engineering: A, 616, 1-11(2014).

[39] Bai Y C, Yang Y Q, Wang D et al. Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting[J]. Materials Science and Engineering: A, 703, 116-123(2017).

[40] Liu Y, Yang Y Q, Mai S Z et al. Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder[J]. Materials & Design, 87, 797-806(2015).

[41] Colopi M, Caprio L, Demir A G et al. Selective laser melting of pure Cu with a 1 kW single mode fiber laser[J]. Procedia CIRP, 74, 59-63(2018).

[42] Zhang M K, Yang Y Q, Wang D et al. Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting[J]. Materials Science and Engineering: A, 736, 288-297(2018).

[43] Chen J, Yang Y Q, Song C H et al. Interfacial microstructure and mechanical properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting[J]. Materials Science and Engineering: A, 752, 75-85(2019).

[44] Xiao Z F, Yang Y Q, Xiao R et al. Evaluation of topology-optimized lattice structures manufactured via selective laser melting[J]. Materials & Design, 143, 27-37(2018).

[45] Zhang M K, Yang Y Q, Wang D et al. Microstructure and mechanical properties of CuSn/18Ni300 bimetallic porous structures manufactured by selective laser melting[J]. Materials & Design, 165, 107583(2019).

[46] Thompson S M, Bian L K, Shamsaei N et al. An overview of direct laser deposition for additive manufacturing: transport phenomena, modeling and diagnostics[J]. Additive Manufacturing, 8, 36-62(2015).

[47] Singh D D, Arjula S, Reddy A R. Metal additive manufacturing by powder blown beam deposition process[J]. International Journal of Engineering and Advanced Technology, 9, 5291-5304(2019).

[48] Zong G S, Zhao H. Technology and application of metal 3D printing[J]. Powder Metallurgy Industry, 29, 1-6(2019).

[49] Yang Y Q, Weng C W, Zhou Q et al. Research on the process and prediction model for size of 316L stainless steel fabricated by plasma arc additive manufacturing[J]. Journal of Mechanical Engineering, 55, 31-38(2019).

[50] Xu K K, Chen K X, Qiu W J et al. Study on equipment and process of plasma arc additive manufacturing[J]. Hot Working Technology, 46, 221-224(2017).

[51] Chen Z Y, Suo H B, Li J W[J]. The forming character of electron beam freeform fabrication Aerospace Manufacturing Technology, 2010, 36-39.

[52] Kazanas P, Deherkar P, Almeida P et al. Fabrication of geometrical features using wire and arc additive manufacture[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226, 1042-1051(2012).

[53] MajumdarJ D, Manna I. Introduction to laser assisted fabrication of materials[M]. ∥Laser-Assisted Fabrication of Materials. Berlin, Heidelberg: Springer, 1-67(2012).

[54] Tang H B, Wu Y, Zhang S Q et al. Research status and development trend of high performance large metallic components by laser additive manufacturing technique[J]. Journal of Netshape Forming Engineering, 11, 58-63(2019).

[55] Keicher D M, Jellison J L, Schanwald L P et al. Towards a reliable laser spray powder deposition system through process characterization. [C]∥International Technical Conference of the Society for the Advancement of Material and Process Engineering (SAMPE). Washington, D.C.: [s.n.], 97201(1995).

[56] Keicher D M, Romero J A, Atwood C L et al. Laser engineered net shaping (LENS TM) for additive component processing. [C]∥1996 Rapid Prototyping and Manufacturing, Dearborn, MI (United States). Washington, D.C.: [s.n.], 231692(1996).

[57] Keicher D M, Romero J A, Atwood C L et al. Free form fabrication using the laser engineered net shaping (LENS TM) process [S.l.]:[S.l.]. Office of Scientific and Technical Information (OSTI), 425303(1996).

[58] Carroll B E, Palmer T A, Beese A M. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing[J]. Acta Materialia, 87, 309-320(2015).

[59] Keist J S, Palmer T A. Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition[J]. Materials & Design, 106, 482-494(2016).

[60] Åkerfeldt P, Antti M L, Pederson R. Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V[J]. Materials Science and Engineering: A, 674, 428-437(2016).

[61] Li Z, Chen J, Sui S et al. The microstructure evolution and tensile properties of Inconel 718 fabricated by high-deposition-rate laser directed energy deposition[J]. Additive Manufacturing, 31, 100941(2020).

[62] Angelastro A, Campanelli S L, Casalino G. Statistical analysis and optimization of direct metal laser deposition of 227-F colmonoy nickel alloy[J]. Optics & Laser Technology, 94, 138-145(2017).

[63] Huang W B, Zhang Y M, Dai W B et al. Mechanical properties of 304 austenite stainless steel manufactured by laser metal deposition[J]. Materials Science and Engineering: A, 758, 60-70(2019).

[64] Arrizubieta J I, Lamikiz A, Cortina M et al. Hardness, grainsize and porosity formation prediction on the laser metal deposition of AISI 304 stainless steel[J]. International Journal of Machine Tools and Manufacture, 135, 53-64(2018).

[65] Kim D K, Woo W, Kim E Y et al. Microstructure and mechanical characteristics of multi-layered materials composed of 316L stainless steel and ferritic steel produced by direct energy deposition[J]. Journal of Alloys and Compounds, 774, 896-907(2019).

[66] Akbari M, Kovacevic R. An investigation on mechanical and microstructural properties of 316LSi parts fabricated by a robotized laser/wire direct metal deposition system[J]. Additive Manufacturing, 23, 487-497(2018).

[67] Shiva S, Palani I A, Mishra S K et al. Investigations on the influence of composition in the development of Ni-Ti shape memory alloy using laser based additive manufacturing[J]. Optics & Laser Technology, 69, 44-51(2015).

[68] Xiang S, Luan H W, Wu J et al. Microstructures and mechanical properties of CrMnFeCoNi high entropy alloys fabricated using laser metal deposition technique[J]. Journal of Alloys and Compounds, 773, 387-392(2019).

[69] Su S, Lu Y Z. Laser directed energy deposition of Zr-based bulk metallic glass composite with tensile strength[J]. Materials Letters, 247, 79-81(2019).

[70] Lv F, Shen L D, Liang H X et al. Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment[J]. Optik, 179, 8-18(2019).

[71] Li H, Chen B, Tan C W et al. Microstructure evolution and mechanical properties of laser metal deposition of Invar 36 alloy[J]. Optics & Laser Technology, 125, 106037(2020).