[1] [1] PANG L F, LI X B, LI T T, et al. Ultra precision chemical mechanical polishing technology for SiC wafer［J］. Micronanoelectronic Technology, 2021, 58(11): 1035-1040 (in Chinese).

[2] [2] YUAN Z W, HE Y, DUAN Z Y, et al. Process study of photocatalysis-assisted polishing for single-crystal silicon carbide［C］// The 19th China Abrasive Technology Academic Conference, 2017 (in Chinese).

[3] [3] ZENG Q F, CAO Q, ALI E, et al. Current development situation of superlow friction behavior of DLC films［J］. China Surface Engineering, 2018, 31(4): 1-19 (in Chinese).

[4] [4] ZENG Q F, SUN S C. Recent advances in chemical mechanical polishing technologies of silicon carbide［J］. Fine Chemical Engineering, 2023: 271-287.

[5] [5] CHEN G M, NI Z F, QIAN S H, et al. Influence of different crystallographic planes on CMP performance of SiC wafer［J］. Journal of Synthetic Crystals, 2019, 48(1): 155-159+172 (in Chinese).

[6] [6] GUO Y, PENG T H, LIU C J, et al. Key parameters of chemical mechanical polishing for obtaining defect free 4H-type conductive SiC substrate surface［J］. Journal of Synthetic Crystals, 2017, 46(5): 759-765 (in Chinese).

[7] [7] LIANG Q R, HU X B, CHEN X F, et al. Chemical mechanical polishing of 4H-SiC with strong oxidizing slurry［J］. Journal of Synthetic Crystals, 2015, 44(7): 1741-1747 (in Chinese).

[8] [8] ZHAO J. China successfully developed domestically produced 6-inch silicon carbide wafers with an annual production of 70,000 pieces［J］. Semiconductor Information, 2015(1): 36-38 (in Chinese).

[9] [9] CHEN H. Simulation and experimental study on flatness of silicon carbide chemical mechanical polishing［D］.Harbin: Harbin Institute of Technology, 2014 (in Chinese).

[10] [10] LI M. Study on abrasive trajectory and machining smoothness of sapphire substrate during polishing［D］.Kunming: Kunming University of Science and Technology, 2017 (in Chinese).

[11] [11] HE Y, TANG W Z, GAO P, et al. Nano-polishing characteristics in vibration-assisted CMP of single-crystal silicon carbide via molecular dynamics simulations［J］. Materials Science in Semiconductor Processing, 2023, 164: 107637.

[12] [12] WANG D, LEE J, HOLLAND K, et al. Von mises stress in chemical-mechanical polishing processes［J］. Journal of the Electrochemical Society, 1997, 144(3): 1121-1127.

[13] [13] YAN Q S, XU S P, LU J B, et al. Study on chemical reaction parameters of CMP solution for single-crystal SiC［J］. Machinery Design & Manufacture, 2017(9): 98-100+104 (in Chinese).

[14] [14] HOCHENG H, TSAI H Y, TSAI M S. Effects of kinematic variables on nonuniformity in chemical mechanical planarization［J］. International Journal of Machine Tools and Manufacture, 2000, 40(11): 1651-1669.

[15] [15] DU J X, SU J X, WANG Z H, et al. Formation mechanism of non-uniformity on material removal in chemical mechanical polishing of hard and brittle crystal substrate［J］. Journal of Synthetic Crystals, 2012, 41(4): 1130-1137 (in Chinese).

[16] [16] HE Y, YUAN Z W, SONG S Y, et al. Investigation on material removal mechanisms in photocatalysis-assisted chemical mechanical polishing of 4H-SiC wafers［J］. International Journal of Precision Engineering and Manufacturing, 2021, 22(5): 951-963.

[17] [17] ZHANG L C, ZARUDI I. Towards a deeper understanding of plastic deformation in mono-crystalline silicon［J］. International Journal of Mechanical Sciences, 2001, 43(9): 1985-1996.

[18] [18] SUN Y H. Study on uniformity of material removal in chemical mechanical polishing of silicon wafer［D］.Dalian: Dalian University of Technology, 2011 (in Chinese).

[19] [19] LIANG Q R, ZONG Y M, WANG X J, et al. Effect of diamond powder on SiC mechanical polishing［J］. Journal of Synthetic Crystals, 2015, 44(2): 295-300 (in Chinese).

[20] [20] YIN T, DOI T, KUROKAWA S, et al. Polishing characteristics of MnO2 polishing slurry on the Si-face of SiC wafer［J］. International Journal of Precision Engineering and Manufacturing, 2018, 19(12): 1773-1780.

[21] [21] HUANG Y H, ZHOU Y Q, LI J M, et al. Understanding the role of surface mechanical properties in SiC surface machining［J］. Materials Science in Semiconductor Processing, 2023, 163: 107594.

[22] [22] YAN H, WU C L, TANG X F, et al. The research status and development trends of chemical mechanical polishing［J］. Materials Research and Application, 2021, 15(4): 432-440 (in Chinese).

[23] [23] DENG J Y, PAN J S, ZHANG Q X, et al. Research progress in chemical mechanical polishing of single crystal SiC substrates［J］. Diamond & Abrasives Engineering, 2020, 40(1): 79-91 (in Chinese).

[24] [24] ZHU L. Study on the technology of grinding sapphire with mortar-assisted consolidated abrasive［D］.Nanjing: Nanjing University of Aeronautics and Astronautics, 2016 (in Chinese).

[25] [25] XU H M, WANG J B, LI Q A, et al. Research progress of chemical mechanical polishing technology of silicon carbide wafer［J］. Modern Manufacturing Engineering, 2022(6): 153-161+116 (in Chinese).

[26] [26] YAMAMURA K, TAKIGUCHI T, UEDA M, et al. High-integrity finishing of 4H-SiC (0001) by plasma-assisted polishing［J］. Advanced Materials Research, 2010, 126/127/128: 423-428.

[27] [27] YAMAMURA K, TAKIGUCHI T, UEDA M, et al. Plasma assisted polishing of single crystal SiC for obtaining atomically flat strain-free surface［J］. CIRP Annals, 2011, 60(1): 571-574.

[28] [28] JI J W, YAMAMURA K, DENG H. Plasma-assisted polishing for atomic surface fabrication of single crystal SiC［J］. Acta Physica Sinica, 2021, 70(6): 068102 (in Chinese).

[29] [29] OKAMOTO T, SANO Y, TACHIBANA K, et al. Improvement of removal rate in abrasive-free planarization of 4H-SiC substrates using catalytic platinum and hydrofluoric acid［J］. Japanese Journal of Applied Physics, 2012, 51(4R): 046501.

[30] [30] YE Z F, ZHOU Y, XU L, et al. Chemical mechanical polishing of 4H-SiC wafer with UV-LED light［J］. Nanotechnology and Precision Engineering, 2017, 15(5): 342-346 (in Chinese).

[31] [31] PIGNATELLO J J, OLIVEROS E, MACKAY A. Advanced oxidation processes for organic contaminant destruction based on the Fenton reaction and related chemistry［J］. Critical Reviews in Environmental Science and Technology, 2006, 36(1): 1-84.

[32] [32] NEYENS E, BAEYENS J. A review of classic Fenton’s peroxidation as an advanced oxidation technique［J］. Journal of Hazardous Materials, 2003, 98(1/2/3): 33-50.

[33] [33] XU S P. Research on chemical cluster magnetorheological compound polishing of single-crystal SiC based on fenton reaction［D］. Guangzhou: Guangdong University of Technology, 2016 (in Chinese).

[34] [34] CHEN R. Study on chemical mechanical polishing of single crystal SiC based on Fenton reaction［D］.Guangzhou: Guangdong University of Technology, 2017 (in Chinese).

[35] [35] LU J B, CHEN R, LIANG H Z, et al. The influence of concentration of hydroxyl radical on the chemical mechanical polishing of SiC wafer based on the Fenton reaction［J］. Precision Engineering, 2018, 52: 221-226.

[36] [36] WANG L, WU R Z, NIU L, et al. Study on electrochemical mechanical polishing process of silicon carbide crystal［J］. Diamond & Abrasives Engineering, 2022, 42(4): 504-510 (in Chinese).

[37] [37] WANG L. Study on electrochemical mechanical polishing process of silicon carbide crystal［D］.Dalian: Dalian University of Technology, 2022 (in Chinese).

[38] [38] MURATA J, HAYAMA K, TAKIZAWA M. Environment-friendly electrochemical mechanical polishing using solid polymer electrolyte/CeO2 composite pad for highly efficient finishing of 4H-SiC (0001) surface［J］. Applied Surface Science, 2023, 625: 157190.

[39] [39] LIANG H Z. Study on compound polishing mechanism of single crystal SiC by magnetorheology［D］.Guangzhou: Guangdong University of Technology, 2019 (in Chinese).

[40] [40] LIANG H Z, LU J B, PAN J S, et al. Material removal process of single-crystal SiC in chemical-magnetorheological compound finishing［J］. The International Journal of Advanced Manufacturing Technology, 2018, 94(5): 2939-2948.

[41] [41] GAN K, LIU Y L, SHI J W, et al. Ultra-precision polishing in silicon carbide wafer［J］. Electronics Process Technology, 2023, 44(2): 51-54 (in Chinese).

[42] [42] XIAO Q, LI Y, LI S J. Situation and development trends of CMP for SiC monocrystal slice［J］. Aerospace Materials & Technology, 2010, 40(1): 9-13 (in Chinese).

[43] [43] WANG Y B. Preparation of diamond @CeO2 and diamond @SiO2 composite abrasive particles and their effects on the polishing performance of SiC［D］.Zhengzhou: Zhengzhou University, 2022 (in Chinese).

[44] [44] LUO J F, DORNFELD D A. Material removal mechanism in chemical mechanical polishing: theory and modeling［J］. IEEE Transactions on Semiconductor Manufacturing, 2001, 14(2): 112-133.

[45] [45] SHI F G, ZHAO B. Modeling of chemical-mechanical polishing with soft pads［J］. Applied Physics A, 1998, 67(2): 249-252.

[46] [46] STEIGERWALD J M, MURARKA S P, GUTMANN R J, et al. Chemical processes in the chemical mechanical polishing of copper［J］. Materials Chemistry and Physics, 1995, 41(3): 217-228.

[47] [47] CHEN X C. Experimental study on material removal mechanism in chemical mechanical polishing ［D］. Wuxi: Jiangnan University, 2014.

[48] [48] XUE M P, XIAO W, ZHANG T Y, et al. Catalytic mechanism of tribochemical mechanical polishing on (0001) C-face of single crystal 6H-SiC substrate［J］. The International Journal of Advanced Manufacturing Technology, 2023: 1-13.

[49] [49] HAO X L, YUAN Z W, WEN Q, et al. Process research on ultrasonic vibration assisted lapping of single crystal silicon carbide［J］. Diamond & Abrasives Engineering, 2022, 42(3): 268-274 (in Chinese).

[50] [50] JIA J P, BAI X J, LI X B, et al. Effects of double-sided mechanical polishing on TTV and material removal rate of SiC substrate［J］. Micronanoelectronic Technology, 2021, 58(9): 840-844 (in Chinese).