[1] Hu M L, Cai Y. Research progress on mid-infrared ultrafast fiber laser[J]. Chinese Journal of Lasers, 47, 0500009(2020).

[2] Zhou S, Li M Z, Jiang J et al. Solid-state mid-infrared laser technology research progress[J]. Infrared Technology, 41, 391-399(2019).

[3] Fang C, Wang S B, Hui Y L et al. Progresson erbium-doped mid-infrared laser[J]. Laser & Optoelectronics Progress, 56, 180002(2019).

[4] Li W W, Zhang X J, Wang H et al. Research progress of mid-infrared rare earth ion-doped fiber lasers at 3 μm[J]. Laser & Optoelectronics Progress, 56, 170605(2019).

[5] Jia Z X, Yao C F, Jia S J et al. Progress on novel mid-infrared glass fibers and relative lasers[J]. Laser & Optoelectronics Progress, 56, 170604(2019).

[6] Shen Y L, Wang Y S, Chen H W et al. High average-power continuous mode-locked middle infrared fiber lasers[J]. Chinese Journal of Lasers, 45, 0615001(2018).

[7] Yan M. The preparation and middle infrared luminescent properties of rare earth doped fluoride glass[D]. Tianjin: Tianjin University of Technology, 11-13(2017).

[8] Wu S H. Mid-infrared emission from rare earth doped zirconate-fluoride glass based on halide ions modify and energy transfer methods[D]. Tianjin: Tianjin University of Technology, 11-18(2019).

[9] Tao Y, Xiang W D. The weathering of fluozirconate glass[J]. Journal of Building Materials, 140-146(1990).

[10] Xiang W D, Tao Y. Study on natural weathering of fluorozirconate glass[J]. Journal of Dalian Institute of Light Industry, 19-22(1992).

[11] Bao S C, Cheng J J. Corrosion mechanism of fluoro-zirconate glasses in neutral and alkaline solution[J]. Journal of East China Institute of Chemical Technology, 18, 60-64(1992).

[12] Simmons C J, Simmons J H. Chemical durability of fluoride glasses: I, reaction of fluorozirconate glasses with water[J]. Journal of the American Ceramic Society, 69, 661-669(1986).

[13] Simmons C J, Sutter H, Simmons J H et al. Aqueous corrosion studies of a fluorozirconate glass[J]. Materials Research Bulletin, 17, 1203-1210(1982). http://www.sciencedirect.com/science/article/pii/0025540882900708

[14] Moynihan C T, Loehr S R. Chemical durability of fluoride glasses[J]. Materials Science Forum, 32/33, 243-253(1991).

[15] Chen D G, Simmons C J, Simmons J H. Corrosion layer formation of ZrF4-based fluoride glasses[J]. Materials Science Forum, 19/20, 315-320(1987).

[16] Smektala F, Matecki M. Stability study on heating and determination of critical cooling rates of fluorozirconate glasses[J]. Journal of Non-Crystalline Solids, 184, 314-318(1995). http://www.sciencedirect.com/science/article/pii/0022309394005893

[17] Dunkley I R, Smith R W, Varma S. The study of devitrification processes in heavy-metal fluoride glasses[J]. Annals of the New York Academy of Sciences, 1027, 150-157(2004). http://onlinelibrary.wiley.com/doi/10.1196/annals.1324.014/abstract

[18] Mcnamara P, Macfarlane D R. Surface defects on fluoride glasses induced during fibre drawing[J]. Materials Science Forum, 32/33, 219-224(1988).

[19] Moore L J, MacFarlane D R, Newman P J. Surface crystallization of ZBLAN glasses[J]. Journal of Non-Crystalline Solids, 140, 159-165(1992).

[20] Loehr S R, Chung K H, Moynihan C T et al. Reaction of gaseous H2O and D2O with ZrF4 -based glasses[J]. Materials Science Forum, 19/20, 327-342(1987).

[21] Ebendorff-Heidepriem H, Monro T M. Analysis of glass flow during extrusion of optical fiber preforms[J]. Optical Materials Express, 2, 304-320(2012). http://www.opticsinfobase.org/abstract.cfm?uri=ome-2-3-304

[22] Saîssy A, Dussardier B, Ostrowsky D et al. Impurity fluorescence in fluorozirconate fibers[J]. Applied Optics, 31, 1175-1176(1992). http://europepmc.org/abstract/MED/20720737

[23] McNamara P, Warmin'Ski T. Microanalysis of a fluoride glass preform[J]. Journal of Non-Crystalline Solids, 512, 197-205(2019). http://www.sciencedirect.com/science/article/pii/S0022309318305611

[24] Klein P H, Pureza P C, Roberts W I et al. Strengthening of ZBLAN glass fibers by preform treatment with active fluorine[J]. Materials Science Forum, 32/33, 571-576(1991).

[25] Pureza P C, Klein P H, Roberts W I et al. Influence of preform surface treatments on the strength of fluorozirconate fibres[J]. Journal of Materials Science, 26, 5149-5154(1991). http://link.springer.com/article/10.1007/BF01143205

[26] Schneider H W, Schoberth A, Staudt A et al. Fluoride glass etching method for preparation of infra-red fibres with improved tensile strength[J]. Electronics Letters, 22, 949-950(1986). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=4256854

[27] Hed P P, Edwards D F, Davis J B. Sub-surface damage in optical materials: origin, measurement, and removal[EB/OL]. (1988-11-02)[2020-06-30 ]. https://www.osti.gov/biblio/7016498.

[28] Blaineau P, Laheurte R, Darnis P et al. Relations between subsurface damage depth and surface roughness of grinded fused silica[J]. Optics Express, 21, 30433-30443(2013).

[29] Zhang J P, Sun H Y, Wang S L et al. Three-dimensional reconstruction technology of subsurface defects in fused silica optical components[J]. Acta Optica Sinica, 40, 0216001(2020).

[30] Kozlowski M R, Carr J, Hutcheon I D et al. Depth profiling of polishing-induced contamination on fused silica surfaces[J]. SPIE, 3244, 365-375(1998). http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=933425

[31] Neauport J, Lamaignere L, Bercegol H et al. Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm[J]. Optics Express, 13, 10163-10171(2005).

[32] Pantano C G, Brow R K. Hydrolysis reactions at the surface of fluorozirconate glass[J]. Journal of the American Ceramic Society, 71, 577-581(1988). http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1988.tb05922.x/full

[33] Doremus R H, Bansal N P, Bradner T et al. Zirconium fluoride glass: surface crystals formed by reaction with water[J]. Journal of Materials Science Letters, 3, 484-488(1984). http://link.springer.com/article/10.1007/BF00720978

[34] Sakaguchi S, Takahashi S. Low-loss fluoride optical fibers form idinfrared optical communication[J]. Journal of Lightwave Technology, 5, 1219-1228(1987). http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=1075648

[35] Hammer P, Rizzato A P, Pulcinelli S H et al. XPS study on water corrosion of fluorzirconate glasses and their protection by a layer of surface modified tin dioxide nanoparticles[J]. Journal of Electron Spectroscopy and Related Phenomena, 156/157/158, 128-134(2007).

[36] Hueber B, Frischat G H, Maldener A et al. Initial corrosion stages of a heavy metal fluoride glass in water[J]. Journal of Non-Crystalline Solids, 256/257, 130-134(1999).

[37] Yu L J. Research of mechanical reliability and life of fiber optic[D]. Wuhan: Wuhan Research Institute of Posts and Telecommunications, 27-37(2017).

[38] Wu C. Study on mechanical strength and bending loss of optical fiber changing with different environments[D]. Hefei: University of Science and Technology of China, 21-26(2018).

[39] Han P. Mechanical strength characteristics of optical fibre in the high-temperature environments[D]. Shanghai: East China University of Science and Technology, 21-32(2013).

[40] Sakaguchi S, Mitachi S. Strength and fatigue of fluoride glass optical fibers[J]. Journal of the American Ceramic Society, 66, c151-c152(1983). http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1983.tb10621.x/abstract

[41] Feng Z R. Optical fiber strength and preform surface treatment techniques[J]. Optical Fiber & Electric Cable and Their Applications, 45-49(1996).

[42] Sha H T. Estimation of weibull parameters for optical fiber strength based on Matlab[J]. Optical Fiber & Electric Cable and Their Applications, 33-36(2013).