Acta Optica Sinica, Volume. 30, Issue 4, 1041(2010)
Probe Spot Position Error on the Accuracy of Focusing and Leveling Measurement System
[4] [4] B. J. Lin. New λ/NA scaling equations for resolution and depth-of-focus[C]. SPIE,2000,4000:759-764
[5] [5] Gary Zhang,Stephen DeMoor,Scott Jessen et al.. Across wafer focus mapping and its applications in advanced technology nodes[C]. SPIE,2006,6154:1-10
[6] [6] Shoji Mimotogi,Fumikatsu Uesawa,Makoto Tominaga et al.. Performance of immersion lithography for 45 nm-node CMOS and ultra-high density SRAM with 0.25 μm[C]. SPIE,2007,6520:1-9
[7] [7] J. E. van der Werf. Optical focus and level sensor for wafer steppers[J]. J. Vac. Sci. Technol. B,1992,10:735-740
[8] [8] Masahiro Watanabe,Yoshitada Oshida,Yasuhiko Nakayama et al.. Focusing and leveling based on wafer surface profile detection with interferometry for optical lithography[C]. SPIE,1994,2197:980-989
[9] [9] Doh Hoon Kim,Byung-Ho Nam,Kag Hyeon Lee. Probe beam scan type auto-focus system using position sensing detector for sub-half micron lithography tools[C]. SPIE,1996,2726:876-885
[10] [10] Uehara Makoto,Sudo Takeshi Sudo,Fujio Kanatani. Horizontal position detecting device[P]. United States,4558949
[11] [11] M. A. Van den Brink,J. M. D. Stoeldraijer,H. F. D. Linders. Overlay and field by field leveling in wafer steppers using an advanced metrology system[C]. SPIE,1992,1673:330-344
[13] [13] Tsuneyuki Hagiwara,Masato Hamatani,Hideyuki Tashiro et al.. Wafer edge-shot algorithm for wafer scanners[C]. SPIE,2002,4691:790-801
[14] [14] Shane Geary,Jim Thompson. Quantifying the effect of pattern density on focus offset[C]. SPIE,2000,3998:607-614
[15] [15] Norihiro Yamamoto,Katsuyoshi Kobayashi,Kenji Nakagawa. Wafer level measurement using auto-focus[C]. SPIE,1996,2726:870-875
Get Citation
Copy Citation Text
Liao Feihong, Li Xiaoping, Chen Xuedong, Li Zhidan. Probe Spot Position Error on the Accuracy of Focusing and Leveling Measurement System[J]. Acta Optica Sinica, 2010, 30(4): 1041
Category: Instrumentation, Measurement and Metrology
Received: May. 20, 2009
Accepted: --
Published Online: Apr. 20, 2010
The Author Email: Feihong Liao (lfh159257@163.com)