[1] Yang H B, Yang A P. Application of laser cladding technology in remanufacturing of pin shaft of hydraulic support[J]. Plant Maintenance and Engineering, 36-38(2022).

[2] Schopphoven T, Gasser A, Wissenbach K et al. Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying[J]. Journal of Laser Applications, 28, 022501(2016).

[3] Wu Y, Liu Y, Chen W J et al. Research status and development direction of extreme high-speed laser material deposition[J]. Electric Welding Machine, 50, 1-10, 140(2020).

[4] Zheng H B, Wang M H, Ge X Y et al. Influence of ultra-high-speed laser cladding process parameters on the structure and properties of the cladding layer[J]. New Technology & New Process, 63-69(2021).

[5] Sun J G. Temperature field of multi-pass laser cladding with synchronous powder feeding and influence of substrate preheating temperature[J]. Hot Working Technology, 45, 194-196(2016).

[6] Xu Y F, Sun Y N, Wang G J et al. Microstructure and properties of iron-based alloys coatings prepared by high-speed laser cladding[J]. Chinese Journal of Lasers, 48, 1002122(2021).

[7] Wu Y, Ma P Z, Bai W Q et al. Numerical simulation of temperature field and stress field in 316L/AISI304 laser cladding with different scanning strategies[J]. Chinese Journal of Lasers, 48, 2202002(2021).

[8] Lu X F, Lin X, Ma L et al. Effect of scanning path on thermo-mechanical field of laser solid forming TC4 part[J]. Journal of Materials Engineering, 47, 55-62(2019).

[9] Liang Z G, Zhan J M, Shi W Q et al. Effect of scanning path on deformation of laser cladding coating on thin-walled part[J]. Laser Technology, 44, 447-450(2020).

[10] Alam M A, Shi Z Q, Drennen J K et al. In-line monitoring and optimization of powder flow in a simulated continuous process using transmission near infrared spectroscopy[J]. International Journal of Pharmaceutics, 526, 199-208(2017).

[11] Yang G Q, Wang C, Liang G L et al. Influence of cooling rate on microstructure of NM400 steel under different conditions[J]. Hot Working Technology, 41, 4-6(2012).

[12] Xu M S, Zhou C H, Zhang Z et al. Temperature distribution of powder-gas-optical coupling temperature field in laser cladding processes[J]. China Mechanical Engineering, 33, 70-77(2022).

[13] Xuan L M, Xu B, Liu Q. Numerical simulation of temperature field in laser cladding process[J]. Agricultural Equipment & Vehicle Engineering, 60, 77-82(2022).

[14] Guo W, Jian H H, Chai R X et al. Numerical simulation and verification of laser cladding on 27SiMn steel surface[J]. Hot Working Technology, 45, 1-6(2016).

[15] Guo W, Zhang Y P, Chai R X. Numerical simulation and experimental study of single-track laser cladding of 304 stainless steels[J]. Laser & Optoelectronics Progress, 56, 091401(2019).

[16] Xiong J, Xue W P, Yao Z W. Simulation of laser cladding temperature field on high strength aluminum alloy surface[J]. Computer Simulation, 38, 164-167, 197(2021).

[17] Huang W B, Zhang Y M. Finite element simulation of thermal behavior in single-track multiple-layers thin wall without-support during selective laser melting[J]. Journal of Manufacturing Processes, 42, 139-148(2019).

[18] Xue F. Particle size control and its important role in performance of powder coatings[J]. Coating and Protection, 42, 28-32(2021).

[19] Yao Y Q. Study on performance and defects improvement of laser cladding Ni-based WC coating by vacuum environment and matrix preheating[D](2019).

[20] Ding Y H, Bi W Y, Zhong C et al. A comparative study on microstructure and properties of ultra-high-speed laser cladding and traditional laser cladding of Inconel625 coatings[J]. Materials, 15, 6400(2022).

[21] Qian S X, Zhang Y K, Dai Y B et al. Microstructure and mechanical properties of nickel-based coatings fabricated through laser additive manufacturing[J]. Metals, 11, 53(2020).

[22] Mao Y, Chen W J, Tang S C. Effects of heat treatment on microstructure and mechanical properties of laser cladding Fe314 alloy coating[J]. Hot Working Technology, 51, 119-124, 128(2022).

[23] Zhou L, Chen S Y, Wei M W et al. Microstructure and properties of 24CrNiMoY alloy steel prepared by direct laser deposited under different preheating temperatures[J]. Materials Characterization, 158, 109931(2019).

[24] Liu G Q, Feng L, Wang H M et al. Statistics on the primary dendrite spacing of Ni-based single crystal super alloys[J]. Special Casting & Nonferrous Alloys, 41, 153-157(2021).

[25] Liu H D, Yu H, Dai J T et al. Effect of non-vacuum laser directional solidification parameters on cladding layer of DZ22 alloy[J]. Materials Reports, 34, 20091-20095(2020).

[26] Chai R X, Zhang Y P, Zhong B et al. Effect of scan speed on grain and microstructural morphology for laser additive manufacturing of 304 stainless steel[J]. Reviews on Advanced Materials Science, 60, 744-760(2021).

[27] Song M, Sun C, Chen Y X et al. Grain refinement mechanisms and strength-hardness correlation of ultra-fine grained grade 91 steel processed by equal channel angular extrusion[J]. International Journal of Pressure Vessels and Piping, 172, 212-219(2019).

[28] Ma L, Wiame F, Maurice V et al. Origin of nanoscale heterogeneity in the surface oxide film protecting stainless steel against corrosion[J]. npj Materials Degradation, 3, 29(2019).

[29] Wang C Q, Liu H X, Zhou R et al. Influence of tempering on microstructure and corrosion resistance of multi-pass Ni-based coatings on 45 steel prepared by laser cladding[J]. Transactions of Materials and Heat Treatment, 32, 145-150(2011).

[30] Shen F M, Tao W, Li L Q et al. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding[J]. Applied Surface Science, 517, 146085(2020).

[31] Pan C, Liu L, Li Y et al. Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques[J]. Electrochimica Acta, 56, 7740-7748(2011).

[32] Zhu H M, Hu J P, Li B C et al. Effects of in-situ tempering on the laser-cladded martensitic stainless steel coating[J]. Surface Technology, 49, 303-308(2020).

[33] Li L Q, Shen F M, Zhou Y D et al. Comparison of microstructure and corrosion resistance of 431 stainless steel coatings prepared by extreme high-speed laser cladding and conventional laser cladding[J]. Chinese Journal of Lasers, 46, 1002010(2019).

[34] Sun G F, Zhang Y K, Zhang M K et al. Microstructure and corrosion characteristics of 304 stainless steel laser-alloyed with Cr-CrB2[J]. Applied Surface Science, 295, 94-107(2014).