Researching | Research on Microstructures and Properties of High-Speed Laser-Cladded Iron-Based Amorphous Alloy Coatings

Laser & Optoelectronics Progress, Volume. 61, Issue 17, 1714006(2024)

Research on Microstructures and Properties of High-Speed Laser-Cladded Iron-Based Amorphous Alloy Coatings

Nanxin Xiang, Houming Zhou^*, Yuhao Wang, Xingyu Cao, and Shengui Li

Author Affiliations

College of Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan 411105, Hunan, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (16)

References (40)

Paper Information

References(40)

[1] Wang W H, Dong C, Shek C H. Bulk metallic glasses[J]. Materials Science and Engineering: R: Reports, 44, 45-89(2004).

[2] Mahbooba Z, Thorsson L, Unosson M et al. Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness[J]. Applied Materials Today, 11, 264-269(2018).

[3] Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys[J]. Acta Materialia, 48, 279-306(2000).

[4] Hua N B, Li R, Wang H et al. Formation and mechanical properties of Ni-free Zr-based bulk metallic glasses[J]. Journal of Alloys and Compounds, 509, S175-S178(2011).

[5] Chen X H, Zhang Y, Zhao F et al. Fabrication and excellent performance of amorphous FeSiBCCr/organic-inorganic hybrid powder core[J]. Journal of Non-Crystalline Solids, 616, 122482(2023).

[6] Abouhaswa A S, Rabiea E A, Abomostafa H M. Structural, optical, and magnetic studies on novel Pr- doped Barium lithium fluoroborate glass system[J]. Journal of Non Crystalline Solids, 619, 122533(2023).

[7] Trexler M M, Thadhani N N. Mechanical properties of bulk metallic glasses[J]. Progress in Materials Science, 55, 759-839(2010).

[8] Zhang C, Wang W, Xing W et al. Understanding on toughening mechanism of bioinspired bulk metallic glassy composites by thermal spray additive manufacturing[J]. Scripta Materialia, 177, 112-117(2020).

[9] Zhang C, Zhou H, Liu L. Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance[J]. Acta Materialia, 72, 239-251(2014).

[10] Li H X, Lu Z C, Wang S L et al. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications[J]. Progress in Materials Science, 103, 235-318(2019).

[11] Zhou Z J, Jiang F L, Yang F Z et al. Eutectic behavior and wear and corrosion resistance mechanisms of FeCoNiCrNb0.5Mo0.25 high-entropy alloy laser cladding layer microstructure[J]. Chinese Journal of Lasers, 50, 0402011(2023).

[12] Wang H Z, Cheng Y H, Zhang X C et al. Effect of laser scanning speed on microstructure and properties of Fe based amorphous/nanocrystalline cladding coatings[J]. Materials Chemistry and Physics, 250, 123091(2020).

[13] Zhang L, Wang C S, Han L Y et al. Influence of laser power on microstructure and properties of laser clad Co-based amorphous composite coatings[J]. Surfaces and Interfaces, 6, 18-23(2017).

[14] Long Z Y, Tao P J, Wang G T et al. Effect of Nb and Ta addition on mechanical properties of Zr-based bulk metallic glasses and composites[J]. Journal of Alloys and Compounds, 912, 165071(2022).

[15] Qiao Q, Cai Z Q, Wang J et al. Effects of adding niobium on microstructures and mechanical properties of ((Zr40Ti40Ni20)72Be28)100－xNbx bulk metallic glasses[J]. Journal of Non Crystalline Solids, 618, 122529(2023).

[16] Zhang T, Zhou J Z, Lü J et al. A novel hybrid ultrasonic and electromagnetic field assisted laser cladding: experimental study and synergistic effects[J]. Journal of Materials Processing Technology, 307, 117658(2022).

[17] Xiao M Y, Jiang F C, Guo C H et al. Investigation on microstructure and mechanical properties of Fe-based amorphous coatings prepared via laser cladding assisted with ultrasonic vibration[J]. Optics Laser Technology, 162, 109294(2023).

[18] Li Y L, Li Y, Wang W Q et al. Synthesis Fe-Ni protective coating on 45 steel by laser remelting nickel pre-coating dopped with Fe-based amorphous powders[J]. Materials Characterization, 176, 111129(2021).

[19] Zhang P L, Yan H, Yao C W et al. Synthesis of Fe-Ni-B-Si-Nb amorphous and crystalline composite coatings by laser cladding and remelting[J]. Surface and Coatings Technology, 206, 1229-1236(2011).

[20] Zhou L, Ma G Z, Zhao H C et al. Research status and prospect of extreme high-speed laser cladding technology[J]. Optics Laser Technology, 168, 109800(2024).

[21] Xu Y F, Sun Y N, Wang G J et al. Microstructure and properties of iron-based alloys coatings prepared by high-speed laser cladding[J]. Chinese Journal of Lasers, 48, 1002122(2021).

[22] Chai R X, Tian Y, Zhou X J et al. Numerical simulation and experimental study of high-speed laser cladding under circular scanning path[J]. Chinese Journal of Lasers, 50, 0802205(2023).

[23] Wang H N, Cheng Y H, Geng R W et al. Comparative study on microstructure and properties of Fe-based amorphous coatings prepared by conventional and high-speed laser cladding[J]. Journal of Alloys and Compounds, 952, 169842(2023).

[24] Li R F, Yuan W Y, Yue H Y et al. Study on microstructure and properties of Fe-based amorphous composite coating by high-speed laser cladding[J]. Optics Laser Technology, 146, 107574(2022).

[25] Wang H Z, Cheng Y H, Yang J Y et al. Influence of laser remelting on organization, mechanical properties and corrosion resistance of Fe-based amorphous composite coating[J]. Surface and Coatings Technology, 414, 127081(2021).

[26] Li T S, Deng D W, Li Z H et al. Effect of laser power on microstructure and hardness of Fe-TiC composite coatings[J]. Laser & Optoelectronics Progress, 60, 1914002(2023).

[27] Snopiński P, Król M, Tański T et al. Effect of cooling rate on microstructural development in alloy ALMG9[J]. Journal of Thermal Analysis and Calorimetry, 133, 379-390(2018).

[28] Lee Y, Nordin M, Babu S S et al. Effect of fluid convection on dendrite arm spacing in laser deposition[J]. Metallurgical and Materials Transactions B, 45, 1520-1529(2014).

[29] Chanda S C, Manna A, Vijayan V et al. PIXE & XRD analysis of nanocrystals of Fe, Ni and Fe2O3[J]. Materials Letters, 61, 5059-5062(2007).

[30] Manne B, Bontha S, Ramesh M R et al. Solid state amorphization of Mg-Zn-Ca system via mechanical alloying and characterization[J]. Advanced Powder Technology, 28, 223-229(2017).

[31] Wang H Z, Cheng Y H, Yang J Y et al. Microstructure and properties of laser clad Fe-based amorphous alloy coatings containing Nb powder[J]. Journal of Non-Crystalline Solids, 550, 120351(2020).

[32] Wang Q Q, Bai X D, Sun B et al. Influence of Si on tribological behavior of laser cladded Fe-based amorphous/crystalline composite coatings[J]. Surface and Coatings Technology, 405, 126570(2021).

[33] Hou X C, Du D, Chang B H et al. Influence of scanning speed on microstructure and properties of laser cladded Fe-based amorphous coatings[J]. Materials, 12, 1279(2019).

[34] Song H L, Jiang F C, Guo C H et al. Effect of ultrasonic vibration on the microstructure and microhardness of laser cladding Fe-based crystalline/amorphous composite coatings[J]. Materials Letters, 335, 133780(2023).

[35] Xu Q L, Zhang Y, Liu S H et al. High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process[J]. Surface and Coatings Technology, 398, 126093(2020).

[36] Heng Z, Shu L S. Effect of laser power on mechanical properties of laser cladded 27SiMn steel[J]. Chinese Journal of Lasers, 49, 0802011(2022).

[37] Wang H Z, Cheng Y H, Yang J Y et al. Microstructure and properties of Fe based amorphous coatings deposited by laser cladding under different preheating temperatures[J]. Journal of Non Crystalline Solids, 602, 122081(2023).

[38] Li K Y, Liang J, Zhou J S. Preparation and characterization of laser cladded FeCrMoBSi amorphous composite coatings[J]. Surface and Coatings Technology, 423, 127520(2021).

[39] Li C Y, Zhai J S, Tian L et al. Fabrication of Fe-based amorphous composite coating by laser cladding[J]. Journal of Non-Crystalline Solids, 589, 121648(2022).

[40] Zhao P, Wang S R, Wang G Q et al. Microstructure and wear resistance of laser cladding Al-Si-Ni-WC coating on aluminum brake disc surfaces[J]. Chinese Journal of Lasers, 50, 2002203(2023).

Tools

Get Citation

Copy Citation Text

Nanxin Xiang, Houming Zhou, Yuhao Wang, Xingyu Cao, Shengui Li. Research on Microstructures and Properties of High-Speed Laser-Cladded Iron-Based Amorphous Alloy Coatings[J]. Laser & Optoelectronics Progress, 2024, 61(17): 1714006

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Lasers and Laser Optics

Received: Dec. 15, 2023

Accepted: Jan. 12, 2024

Published Online: Sep. 14, 2024

The Author Email: Houming Zhou (zhouhouming@xtu.edu.cn)

DOI:10.3788/LOP232681

CSTR:32186.14.LOP232681

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology