[2] [2] KIMOTO T. Material science and device physics in SiC technology for high-voltage power devices［J］. Japanese Journal of Applied Physics, 2015, 54(4): 040103.

[3] [3] SHE X, HUANG A Q, LUCA , et al. Review of silicon carbide power devices and their applications［J］. IEEE Transactions on Industrial Electronics, 2017, 64(10): 8193-8205.

[4] [4] WANG J, JIANG X. Review and analysis of SiC MOSFETs’ ruggedness and reliability［J］. IET Power Electronics, 2020, 13(3): 445-455.

[5] [5] JIA H J, ZHANG H, YANG Y T. A novel 4H-SiC MESFET with a L-gate and a partial p-type spacer［J］. Materials Science in Semiconductor Processing, 2012, 15(1): 2-5.

[7] [7] GOEL S. The Current understanding on the diamond machining of silicon carbide［J］. Journal of Physics D: Applied Physics, 2014, 47(24): 243001.

[8] [8] TREZONA R I, ALLSOPP D N, HUTCHINGS I M. Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test［J］. Wear, 1999, 225/226/227/228/229: 205-214.

[9] [9] GUO L, ZHANG X R, CHEN S B, et al. An experimental study on the precision abrasive machining process of hard and brittle materials with ultraviolet-resin bond diamond abrasive tools［J］. Materials, 2019, 12(1): 125.

[10] [10] BERKMAN E, LEONARD R T, PAISLEY M J, et al. Defect status in SiC manufacturing［J］. Materials Science Forum, 2009, 615/616/617: 3-6.

[11] [11] WU P, EMORHOKPOR E, YOGANATHAN M, et al. Dislocation in 4H n+ SiC substrates and their relationship with epilayer defects［J］. Materials Science Forum, 2007, 556/557: 247-250.

[12] [12] OHTANI N. Toward the reduction of performance-limiting defects in SiC epitaxial substrates［J］. ECS Transactions, 2011, 41(8): 253-260.

[13] [13] LIU X S, WANG R, ZHANG J R, et al. Doping-dependent nucleation of basal plane dislocations in 4H-SiC［J］. Journal of Physics D: Applied Physics, 2022, 55(33): 334002.

[14] [14] TSAI M Y, LI K Y, JI S Y. Novel abrasive-impregnated pads and diamond plates for the grinding and lapping of single-crystal silicon carbide wafers［J］. Applied Sciences, 2021, 11(4): 1783.

[15] [15] ZHOU P, ZHU N N, XU C Y, et al. Mechanical removal of SiC by multi-abrasive particles in fixed abrasive polishing using molecular dynamics simulation［J］. Computational Materials Science, 2021, 191: 110311.

[18] [18] MAEDA H, TAKANABE R, TAKEDA A, et al. High-speed slicing of SiC ingot by high-speed multi wire saw［J］. Materials Science Forum, 2014, 778/779/780: 771-775.

[20] [20] JIANGSU AUCKSUN INTEGRATED CIRCUIT CO. Method for controlling processing of BOW value of abrasive products, involves cutting sapphire ingots are into wafers using multi-wire, sorting cutter btained line-cut wafer is by positive and negative BOW surfaces: China, CN110722692-A［P］. 2020-01-24.

[23] [23] POWELL R W. Thermal conductivities and expansion coefficients of water and ice［J］. Advances in Physics, 1958, 7(26): 276-297.

[24] [24] GANESHKUMAR J, KATHIRKAMAN D, RAJA K, et al. Experimental study on density, thermal conductivity, specific heat, and viscosity of water-ethylene glycol mixture dispersed with carbon nanotubes［J］. Thermal Science, 2017, 21(1 Part A): 255-265.