Researching | Stress Propagation and Coordinated Forming of Perforated Plate by Laser Shot Peening

Laser & Optoelectronics Progress, Volume. 62, Issue 9, 0914004(2025)

Stress Propagation and Coordinated Forming of Perforated Plate by Laser Shot Peening

Chengwei Li¹, Gaoqiang Jiang¹, Qingjia Li¹, Xiankai Meng¹, Shu Huang¹, and Jianzhong Zhou^1,2、*

Author Affiliations

¹School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu , China

²Zhejiang Provincial Innovation Center of Laser Intelligent Equipment Technology, Wenzhou 325038, Zhejiang , China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (18)

References (21)

Paper Information

References(21)

[1] Miller W S, Zhuang L, Bottema J et al. Recent development in aluminium alloys for the automotive industry[J]. Materials Science and Engineering: A, 280, 37-49(2000).

[2] Costa J D M, Jesus J S, Loureiro A et al. Fatigue life improvement of mig welded aluminium T-joints by friction stir processing[J]. International Journal of Fatigue, 61, 244-254(2014).

[3] Dursun T, Soutis C. Recent developments in advanced aircraft aluminium alloys[J]. Materials & Design, 1980, 862-871(56).

[4] Lü S N, Zheng L, Chang D X et al. Improving the stamping formability of rolled titanium/iron composite sheets by annealing[J]. Materials Science and Engineering: A, 845, 143241(2022).

[5] Weiss M, Sreenivas A, Jeganathan H et al. The effect of the calibration method on the critical forming strains and fracture limits in the roll forming of 7075 series aluminium[J]. Journal of Materials Processing Technology, 316, 117948(2023).

[6] Liu C, Zhao Z Y, Zhang X J et al. A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451[J]. Chinese Journal of Aeronautics, 34, 617-627(2021).

[7] Ziya-Shamami M, Babaei H, Mostofi T M et al. Structural response of monolithic and multi-layered circular metallic plates under repeated uniformly distributed impulsive loading: an experimental study[J]. Thin-Walled Structures, 157, 107024(2020).

[8] Hu Y X, Xie Y F, Wu D et al. Quantitative evaluation of specimen geometry effect on bending deformation of laser peen forming[J]. International Journal of Mechanical Sciences, 150, 404-410(2019).

[9] Yocom C J, Zhang X, Liao Y L. Research and development status of laser peen forming: a review[J]. Optics & Laser Technology, 108, 32-45(2018).

[10] Hu Y X, Xu X X, Yao Z Q et al. Laser peen forming induced two way bending of thin sheet metals and its mechanisms[J]. Journal of Applied Physics, 108, 073117(2010).

[11] Sala S T, Keller S, Chupakhin S et al. Effect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheets[J]. Journal of Materials Processing Technology, 305, 117578(2022).

[12] Liu H L, Yang H J, Tong Z P et al. Enhancing the forming quality of Al2024-T351 sheets in laser peen forming through a novel energy sequence arrangement strategy[J]. Journal of Manufacturing Processes, 102, 814-826(2023).

[13] Kim J H, Jeon J H, Park J S et al. Effect of reinforcement on buckling and ultimate strength of perforated plates[J]. International Journal of Mechanical Sciences, 92, 194-205(2015).

[14] Liu H L, Yang H J, Tong Z P et al. Forming quality and residual stress analysis of Al2024-T351 perforated sheets with laser annulus and strip peening[J]. Optics & Laser Technology, 171, 110333(2024).

[15] Liu C X, Lu S H, Miao W et al. Experimental study on ultrasonic shot peening forming and surface properties of AALY12[J]. Advanced Materials Research, 1094, 339-342(2015).

[16] Fabbro R, Fournier J, Ballard P et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 68, 775-784(1990).

[17] Sirigiri V K R, Gudiga V Y, Gattu U S et al. A review on Johnson Cook material model[J]. Materials Today: Proceedings, 62, 3450-3456(2022).

[18] Ren X D, Zhan Q B, Yuan S Q et al. A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH4169[J]. Materials & Design, 54, 708-711(2014).

[19] Kashaev N, Ushmaev D, Ventzke V et al. On the application of laser shock peening for retardation of surface fatigue cracks in laser beam-welded AA6056[J]. Fatigue & Fracture of Engineering Materials & Structures, 43, 1500-1513(2020).

[20] Keller S, Chupakhin S, Staron P et al. Experimental and numerical investigation of residual stresses in laser shock peened AA2198[J]. Journal of Materials Processing Technology, 255, 294-307(2018).

[21] Zhou W F, Ren X D, Wang C C et al. Residual stress induced convex bending in laser peen formed aluminum alloy[J]. Journal of Laser Applications, 30, 012001(2018).

Tools

Get Citation

Copy Citation Text

Chengwei Li, Gaoqiang Jiang, Qingjia Li, Xiankai Meng, Shu Huang, Jianzhong Zhou. Stress Propagation and Coordinated Forming of Perforated Plate by Laser Shot Peening[J]. Laser & Optoelectronics Progress, 2025, 62(9): 0914004

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Lasers and Laser Optics

Received: Jan. 2, 2025

Accepted: Feb. 4, 2025

Published Online: Apr. 21, 2025

The Author Email: Jianzhong Zhou (zhoujz@ujs.edu.cn)

DOI:10.3788/LOP250429

CSTR:32186.14.LOP250429

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology