[1] Qin Y L, Sun B H, Zhang H et al. Development of selective laser melted aluminum alloys and aluminum matrix composites in aerospace field[J]. Chinese Journal of Lasers, 48, 1402002(2021).

[2] Dadbakhsh S, Mertens R, Hao L et al. Selective laser melting to manufacture “in situ” metal matrix composites: a review[J]. Advanced Engineering Materials, 21, 1801244(2019).

[3] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[4] Zhang J L, Song B, Wei Q S et al. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends[J]. Journal of Materials Science & Technology, 35, 270-284(2019).

[5] Weingarten C, Buchbinder D, Pirch N et al. Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg[J]. Journal of Materials Processing Technology, 221, 112-120(2015).

[6] Thijs L, Kempen K, Kruth J P et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder[J]. Acta Materialia, 61, 1809-1819(2013).

[7] van Bael S, Kerckhofs G, Moesen M et al. Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures[J]. Materials Science and Engineering: A, 528, 7423-7431(2011).

[8] Wang Z M, Guan K, Gao M et al. The microstructure and mechanical properties of deposited-IN718 by selective laser melting[J]. Journal of Alloys and Compounds, 513, 518-523(2012).

[9] Amato K N, Gaytan S M, Murr L E et al. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting[J]. Acta Materialia, 60, 2229-2239(2012).

[10] Liverani E, Toschi S, Ceschini L et al. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel[J]. Journal of Materials Processing Technology, 249, 255-263(2017).

[11] Shi W T, Wang P, Liu Y D et al. Experimental study on surface quality and process of selective laser melting forming 316L[J]. Surface Technology, 48, 257-267(2019).

[12] Gao C, Wu W, Shi J et al. Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser melting[J]. Additive Manufacturing, 34, 101378(2020).

[13] Zou T C, Zhu H, Chen M Y et al. Microstructure and tensile properties of SiC reinforced aluminum matrix composite prepared by selective laser melting[J]. Chinese Journal of Lasers, 48, 1002123(2021).

[14] Cooper D E, Blundell N, Maggs S et al. Additive layer manufacture of Inconel 625 metal matrix composites, reinforcement material evaluation[J]. Journal of Materials Processing Technology, 213, 2191-2200(2013).

[15] Jiang D F, Hong C, Zhong M L et al. Fabrication of nano-TiCp reinforced Inconel 625 composite coatings by partial dissolution of micro-TiCp through laser cladding energy input control[J]. Surface and Coatings Technology, 249, 125-131(2014).

[16] Jin J B, Zhao Y, Zhao S Z et al. Effect of TiN content on microstructure and wear resistance of Ti-based composites produced by selective laser melting[J]. Chinese Journal of Lasers, 46, 1102013(2019).

[17] AlMangour B, Grzesiak D, Jenn-Mingyang. Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: influence of starting TiC particle size and volume content[J]. Materials & Design, 104, 141-151(2016).

[18] AlMangour B, Grzesiak D, Cheng J Q et al. Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: experimental and simulation methods[J]. Journal of Materials Processing Technology, 257, 288-301(2018).

[19] Hui X D, Yang Y S, Wang Z F et al. High temperature creep behavior of in situ TiC particulate reinforced Fe-Cr-Ni matrix composite[J]. Materials Science and Engineering: A, 282, 187-192(2000).

[20] Gu D D, Cao S N, Lin K J. Laser metal deposition additive manufacturing of TiC reinforced Inconel 625 composites: influence of the additive TiC particle and its starting size[J]. Journal of Manufacturing Science and Engineering, 139, 041014(2017).

[21] Hong C, Gu D D, Dai D H et al. Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures[J]. Optics & Laser Technology, 54, 98-109(2013).

[22] Jia Q B. Selective laser melting fabrication of nickel-based superalloys and its composites: process, microstructure and property[D], 22-29(2015).