Journals Articles Conferences News About CLP
Submit a paper Email Alert
Search
Search
Articles
Journals
News
Advanced Search
Top Searches
2D MaterialsTransformation opticsQuantum PhotonicsSmall lasersSemiconductor UV PhotonicsSupersymmetric microring laser arrays

NUCLEAR TECHNIQUES, Volume. 46, Issue 10, 100604(2023)

Thermal stress of W/316L stainless steel first wall system based on rough substrate

Ze LIU1, Qingsong LENG2, Lin TANG1, Jian WANG3, Yafei ZHANG1, Zhi CAO4、*, and Fuchun SUN2、**
Author Affiliations
  • 1School of Electronic Information and Electrical Engineering, Chengdu University, Chengdu 610106, China
  • 2School of Mechanical Engineering, Chengdu University, Chengdu 610106, China
  • 3Cryogenic Department, Shanghai Marine Diesel Engine Research Institute, Shanghai 201203, China
  • 4The 404 Co., Ltd., CNNC, Jiayuguan 735100, China
    • show less
    AbstractGet PDF(in Chinese)
    Figures&Tables (11)
    Equations (0)
    References (28)
    Tools
    Paper Information
    Topics
    References(28)

    [1] Sethian J D, Raffray A R, Latkowski J et al. An overview of the development of the first wall and other principal components of a laser fusion power plant[J]. Journal of Nuclear Materials, 347, 161-177(2005).

    [2] Andrew P, Coad J P, Ehrenberg J et al. Experiments on the release of tritium from the first wall of JET[J]. Nuclear Fusion, 33, 1389-1404(1993).

    [3] Rödig M, Duwe R, Kühnlein W et al. Testing of actively cooled high heat flux mock-ups[J]. Journal of Nuclear Materials, 258–263, 967-971(1998).

    [4] Ge C C, Zhou Z J, Song S X et al. Progress of research on plasma facing materials in University of Science and Technology Beijing[J]. Journal of Nuclear Materials, 363–365, 1211-1215(2007).

    [5] Mattas R F, Garner F A, Grossbeck M L et al. The impact of swelling on fusion reactor first wall lifetime[J]. Journal of Nuclear Materials, 122, 230-235(1984).

    [6] Smith D L, Chung H M, Loomis B A et al. Development of vanadium-base alloys for fusion first-wall—blanket applications[J]. Fusion Engineering and Design, 29, 399-410(1995).

    [7] Klein F, Wegener T, Litnovsky A et al. Oxidation resistance of bulk plasma-facing tungsten alloys[J]. Nuclear Materials and Energy, 15, 226-231(2018).

    [8] Bolt H, Barabash V, Krauss W et al. Materials for the plasma-facing components of fusion reactors[J]. Journal of Nuclear Materials, 329–333, 66-73(2004).

    [9] Gruber O, Sips A, Dux R et al. Compatibility of ITER scenarios with full tungsten wall in ASDEX Upgrade[J]. Nuclear Fusion, 49, 115014(2009).

    [10] Pitts R A, Carpentier S, Escourbiac F et al. A full tungsten divertor for ITER: physics issues and design status[J]. Journal of Nuclear Materials, 438, S48-S56(2013).

    [11] Norajitra P, Gervash A, Giniyatulin R et al. Helium-cooled divertor for DEMO: manufacture and high heat flux tests of tungsten-based mock-ups[J]. Journal of Nuclear Materials, 386–388, 813-816(2009).

    [12] Missiaen J M, Raharijaona J J, Antoni A et al. Design of a W/steel functionally graded material for plasma facing components of DEMO[J]. Journal of Nuclear Materials, 416, 262-269(2011).

    [13] Firdaouss M, Desgranges C, Hernandez C et al. Overview of the different processes of tungsten coating implemented into WEST tokamak[J]. Fusion Engineering and Design, 124, 207-210(2017).

    [14] Davis J W, Slattery K T, Driemeyer D E et al. Use of tungsten coating on iter plasma facing components[J]. Journal of Nuclear Materials, 233–237, 604-608(1996).

    [15] Cambe A, Gauthier E, Layet J M et al. Development of tungsten coating for fusion applications[J]. Fusion Engineering and Design, 56–57, 331-336(2001).

    [16] LIU Hongbing, TAO Jie, ZHANG Pingze et al. Stimulation of residual stresses in functionally gradient Al coatings on 316L substrate[J]. Nuclear Techniques, 31, 105-110(2008).

    [17] Bemporad E, Sebastiani M, Casadei F et al. Modelling, production and characterisation of duplex coatings (HVOF and PVD) on Ti-6Al-4V substrate for specific mechanical applications[J]. Surface and Coatings Technology, 201, 7652-7662(2007).

    [18] Huang Q Y. Development status of CLAM steel for fusion application[J]. Journal of Nuclear Materials, 455, 649-654(2014).

    [19] Tsui Y C, Clyne T W. An analytical model for predicting residual stresses in progressively deposited coatings Part 3: further development and applications[J]. Thin Solid Films, 306, 52-61(1997).

    [20] Zhang W X, Fan X L, Wang T J. The surface cracking behavior in air plasma sprayed thermal barrier coating system incorporating interface roughness effect[J]. Applied Surface Science, 258, 811-817(2011).

    [21] Liu Z, Bai X, Sun S et al. Simulation of the surface cracking behavior in Al2O3 coating as tritium penetration barrier by extended finite element analysis[J]. Fusion Engineering and Design, 173, 112901(2021).

    [22] Haider J, Rahman M, Corcoran B et al. Simulation of thermal stress in magnetron sputtered thin coating by finite element analysis[J]. Journal of Materials Processing Technology, 168, 36-41(2005).

    [23] Liu H B, Tao J, Gautreau Y et al. Simulation of thermal stresses in SiC-Al2O3 composite tritium penetration barrier by finite-element analysis[J]. Materials & Design, 30, 2785-2790(2009).

    [24] MA Yunzhu, LIU Haoyang, LIU Wensheng et al. Numerical simulation of residual stress in tungsten/steel diffusion bonded joints[J]. The Chinese Journal of Nonferrous Metals, 24, 2280-2286(2014).

    [25] Liu Z, Tang L, Tang W et al. Finite element simulation of thermal stress in RF magnetron sputtered SiC coating as tritium penetration barrier[J]. Surface and Coatings Technology, 446, 128747(2022).

    [26] Ohring M[M]. Materials science of thin films(2001).

    [27] Chawla V, Jayaganthan R, Chandra R. Finite element analysis of thermal stress in magnetron sputtered Ti coating[J]. Journal of Materials Processing Technology, 200, 205-211(2008).

    [28] Islamoglu Y, Celik E, Parmaksizoglu C et al. Effects on residual stresses of annealing parameters in high-temperature ZrO2 insulation coatings on Ag/Bi-2212 superconducting tapes using finite element method[J]. Materials & Design, 23, 531-536(2002).

    Tools

    Get Citation

    Copy Citation Text

    Ze LIU, Qingsong LENG, Lin TANG, Jian WANG, Yafei ZHANG, Zhi CAO, Fuchun SUN. Thermal stress of W/316L stainless steel first wall system based on rough substrate[J]. NUCLEAR TECHNIQUES, 2023, 46(10): 100604

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Set citation alerts for article
    Save article for my favorites
    Paper Information

    Category: Research Articles

    Received: Oct. 31, 2022

    Accepted: --

    Published Online: Nov. 21, 2023

    The Author Email:

    DOI:10.11889/j.0253-3219.2023.hjs.46.100604

    Topics

    laser devices and laser physics
    Lasers and Laser Optics
    Laser physics
    laser manufacturing
    Instrumentation, Measurement and Metrology