[1] Miller P R, Aggarwal R, Doraiswamy A et al. Laser micromachining for biomedical applications[J]. JOM, 61, 35-40(2009). http://link.springer.com/article/10.1007/s11837-009-0130-7

[2] Ruddock I S, Bradley D J. Bandwidth-limited subpicosecond pulse generation in mode-locked cw dye lasers[J]. Applied Physics Letters, 29, 296-297(1976). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=4846057

[3] Fork R L, Greene B I, Shank C V. Generation of optical pulses shorter than 0.1 psec by colliding pulse mode locking[J]. Applied Physics Letters, 38, 671-672(1981). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=4849837

[4] Pronko P P. VanRompay P A, Singh R K, et al. Laser induced avalanche ionization and electron-lattice heating of silicon with intense near IR femtosecond pulses[C]. MRS Proceedings, 397, 45-51(1995).

[5] Li X, Jiang L, Wang Cet al. Transient localized material properties changes by ultrafast laser-pulse manipulation of electron dynamics in micro/nano manufacturing[J]. 1365: mrss11-1365-tt01-01(2011).

[6] Schaffer C B, Brodeur A, Mazur E. Laser-induced breakdown and damage in bulk transparent materials induced by tightly focused femtosecond laser pulses[J]. Measurement Science and Technology, 12, 1784-1794(2001). http://www.ingentaconnect.com/content/iop/mst/2001/00000012/00000011/art00305

[7] Sanner N, Utéza O, Bussiere B et al. Measurement of femtosecond laser-induced damage and ablation thresholds in dielectrics[J]. Applied Physics A, 94, 889-897(2009). http://link.springer.com/article/10.1007/s00339-009-5077-6

[8] Le Harzic R, Huot N, Audouard E et al. Comparison of heat-affected zones due to nanosecond and femtosecond laser pulses using transmission electronic microscopy[J]. Applied Physics Letters, 80, 3886-3888(2002). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=4865936

[9] Kautek W, Krüger J, Lenzner M et al. Laser ablation of dielectrics with pulse durations between 20 fs and 3 ps[J]. Applied Physics Letters, 69, 3146-3148(1996). http://scitation.aip.org/content/aip/journal/apl/69/21/10.1063/1.116810

[10] Maselli V, Grenier J R, Ho S et al. Femtosecond laser written optofluidic sensor: Bragg grating waveguide evanescent probing of microfluidic channel[J]. Optics Express, 17, 11719-11729(2009). http://www.ncbi.nlm.nih.gov/pubmed/19582086

[11] Cheng Jie, Yang Minghong, Wang Min et al. Mach-Zehnder interference hydrogen sensor based on femtosecond laser processing[J]. Acta Optica Sinica, 32, 0706001(2012).

[12] Gittard S D, Narayan R J. Laser direct writing of micro- and nano-scale medical devices[J]. Expert Review of Medical Devices, 7, 343-356(2010). http://europepmc.org/articles/PMC2916174

[13] Nolte S, Chichkov B N, Welling H et al. Nanostructuring with spatially localized femtosecond laser pulses[J]. Optics Letters, 24, 914-916(1999). http://www.ncbi.nlm.nih.gov/pubmed/18073894

[14] Liu Y, Sun S, Singha S et al. 3D femtosecond laser patterning of collagen for directed cell attachment[J]. Biomaterials, 26, 4597-4605(2005). http://www.ncbi.nlm.nih.gov/pubmed/15722129

[15] Maruo S, Ikuta K, Korogi H. Submicron manipulation tools driven by light in a liquid[J]. Applied Physics Letters, 82, 133-135(2003). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=4868544

[16] Doraiswamy A, Jin C, Narayan R J et al. Two photon induced polymerization of organic-inorganic hybrid biomaterials for microstructured medical devices[J]. Acta Biomaterialia, 2, 267-275(2006). http://www.sciencedirect.com/science/article/pii/S1742706106000055

[17] Ostendorf A, Bauer T, Korte F et al. Development of an industrial femtosecond laser micromachining system[C]. SPIE, 4633, 128-135(2002).

[18] Wang Guisen, Wan Yi, Wang Teng et al. Review on preparation of micro-nano structure on implant surface and its biocompatibility[J]. Surface Technology, 45, 8-18(2016).

[19] Alves N M, Pashkuleva I, Reis R L et al. Controlling cell behavior through the design of polymer surfaces[J]. Small, 6, 2208-2220(2010). http://www.ncbi.nlm.nih.gov/pubmed/20848593

[20] Seo C H, Jeong H, Furukawa K S. et al. The switching of focal adhesion maturation sites and actin filament activation for MSCs by topography of well-defined micropatterned surfaces[J]. Biomaterials, 34, 1764-1771(2013). http://www.ncbi.nlm.nih.gov/pubmed/23219606

[21] Anselme K, Bigerelle M. On the relation between surface roughness of metallic substrates and adhesion of human primary bone cells[J]. Scanning, 36, 11-20(2014). http://www.ncbi.nlm.nih.gov/pubmed/23203601

[22] Aebli N, Krebs J, Stich H et al. In vivo comparison of the osseointegration of vacuum plasma sprayed titanium- and hydroxyapatite-coated implants[J]. Journal of Biomedical Materials Research Part A, 66A, 356-363(2003). http://europepmc.org/abstract/MED/12889006

[23] Dumas V, Rattner A, Vico L. et al. Multiscale grooved titanium processed with femtosecond laser influences mesenchymal stem cell morphology, adhesion, and matrix organization[J]. Journal of Biomedical Materials Research Part A, 100A, 3108-3116(2012). http://www.ncbi.nlm.nih.gov/pubmed/22791663

[24] Cunha A, Serro A P, Oliveira V. et al. Wetting behaviour of femtosecond laser textured Ti-6Al-4V surfaces[J]. Applied Surface Science, 265, 688-696(2013). http://www.sciencedirect.com/science/article/pii/S0169433212020430

[25] Oliveira V, Polushkin N I, Conde O et al. Laser surface patterning using a Michelson interferometer and femtosecond laser radiation[J]. Optics & Laser Technology, 44, 2072-2075(2012). http://www.sciencedirect.com/science/article/pii/S003039921200134X

[26] Koufaki N, Ranella A, Aifantis K E et al. Controlling cell adhesion via replication of laser micro/nano- textured surfaces on polymers[J]. Biofabrication, 3, 045004(2011). http://europepmc.org/abstract/MED/21904024

[27] Wang Rui, Zhou Yanmin. Application of femto-second laser in titanium alloy surface modification and its influence in adhesion and proliferation of osteoblasts[J]. Journal of Jilin University (Medicine Edition), 39, 453-457(2013).

[28] Dumas V, Guignandon A, Vico L et al. Femtosecond laser nano/micro patterning of titanium influences mesenchymal stem cell adhesion and commitment[J]. Biomedical Materials, 10, 055002(2015). http://europepmc.org/abstract/MED/26334374

[29] Cunha A, Zouani O F, Plawinski L et al. Human mesenchymal stem cell behavior on femtosecond laser-textured Ti-6Al-4V surfaces[J]. Nanomedicine, 10, 725-739(2015). http://www.ncbi.nlm.nih.gov/pubmed/25816876

[30] Zhang R, Wan Y, Ai X et al. Preparation of micro-nanostructure on titanium implants and its bioactivity[J]. Transactions of Nonferrous Metals Society of China, 26, 1019-1024(2016). http://www.sciencedirect.com/science/article/pii/S1003632616642176

[31] Allegrini Jr S, Yoshimoto M, Barbosa Salles M et al. Biologic response to titanium implants with laser-treated surfaces[J]. International Journal of Oral & Maxillofacial Implants, 29, 1-8(2014). http://www.ncbi.nlm.nih.gov/pubmed/24451855

[32] Sa A R, Mousavi S A, Seyedjafari E et al. Polycarbonate surface cell's adhesion examination after Nd∶YAG laser irradiation[J]. Materials Science and Engineering C, 29, 1491-1497(2009). http://www.sciencedirect.com/science/article/pii/S0928493108003676

[33] Spearing S M. Materials issues in microelectromechanical systems (MEMS)[J]. Acta Materialia, 48, 179-196(2000). http://www.sciencedirect.com/science/article/pii/S1359645499002943

[34] Birmpiliotis D, Czarnecki P, Koutsoureli M et al. Assessment of dielectric charging in capacitive MEMS switches fabricated on Si substrate with thin oxide film[J]. Microelectronic Engineering, 159, 209-214(2016). http://www.sciencedirect.com/science/article/pii/S0167931716302003

[35] Jeong J, Shin S, Lee G J. et al. Advancements in fabrication process of microelectrode array for a retinal prosthesis using liquid crystal polymer (LCP)[C]. IEEE, 5295-5298(2013).

[36] Green R A, Ordonez J S, Schuettler M et al. Cytotoxicity of implantable microelectrode arrays produced by laser micromachining[J]. Biomaterials, 31, 886-893(2010). http://europepmc.org/abstract/med/19833388

[37] Suaning G J, Schuettler M, Ordonez J S. et al. Fabrication of multi-layer, high-density micro-electrode arrays for neural stimulation and bio-signal recording[C]. CNE '07. 3rd International IEEE/EMBS Conference on Neural Engineering, 5-8(2007).

[38] Safadi M R, Scott A J, Thakur J et al. Fabrication of a waveguide for biomedical applications using novel micromachining techniques[C]. SPIE, 5588, 205-213(2004).

[39] Yuan D, Das S. Experimental and theoretical analysis of direct-write laser micromachining of polymethyl methacrylate by CO2 laser ablation[J]. Journal of Applied Physics, 101, 024901(2007). http://scitation.aip.org/content/aip/journal/jap/101/2/10.1063/1.2409621

[40] Teixidor D, Orozco F, Thepsonthi T et al. Effect of process parameters in nanosecond pulsed laser micromachining of PMMA-based microchannels at near-infrared and ultraviolet wavelengths[J]. The International Journal of Advanced Manufacturing Technology, 67, 1651-1664(2013). http://link.springer.com/article/10.1007/s00170-012-4598-x

[41] Criales L E, Orozco P F, Medrano A et al. Effect of fluence and pulse overlapping on fabrication of microchannels in PMMA/PDMS via UV laser micromachining: modeling and experimentation[J]. Materials and Manufacturing Processes, 30, 890-901(2015). http://www.tandfonline.com/doi/abs/10.1080/10426914.2015.1004690

[42] Guo X, Tavakoli B, Kang H J et al. Photoacoustic active ultrasound element for catheter tracking[C]. SPIE, 8943, 89435M(2014).

[43] Bell J A, Saikus C E, Ratnayaka K et al. A deflectable guiding catheter for real-time MRI-guided interventions[J]. Journal of Magnetic Resonance Imaging, 35, 908-915(2012). http://europepmc.org/abstract/MED/22128071

[44] Lee K K C, Munce N R, Shoa T et al. . Fabrication and characterization of laser-micromachined polypyrrole-based artificial muscle actuated catheters[J]. Sensors and Actuators A: Physical, 153, 230-236(2009). http://www.sciencedirect.com/science/article/pii/S0924424709002519

[45] Wongwiwat P, Narayan R J, ethylene glycol. MSEC2010-[C]. diacrylate, diamond-like carbon for biomedical devices. ASME, 34283, 273-280(2010).

[46] Crucho C I C, Barros M T. Formulation of functionalized PLGA polymeric nanoparticles for targeted drug delivery[J]. Polymer, 68, 41-46(2015). http://www.sciencedirect.com/science/article/pii/S0032386115004309

[47] Zehbe R, Zehbe K. Strontium doped poly-ε-caprolactone composite scaffolds made by reactive foaming[J]. Materials Science and Engineering: C, 67, 259-266(2016). http://www.ncbi.nlm.nih.gov/pubmed/27287121

[48] Kim M S, Son J G, Lee H J et al. Highly porous 3D nanofibrous scaffolds processed with an electrospinning/laser process[J]. Current Applied Physics, 14, 1-7(2014). http://www.sciencedirect.com/science/article/pii/S1567173913003489

[49] Wang J, Valmikinathan C M, Liu W et al. Spiral-structured,nanofibrous, 3D scaffolds for bone tissue engineering[J]. Journal of Biomedical Materials Research Part A, 93, 753-762(2010). http://www.ncbi.nlm.nih.gov/pubmed/19642211

[50] Kancharla V V, Chen S. Fabrication of biodegradable polymeric micro-devices using laser micromachining[J]. Biomedical Microdevices, 4, 105-109(2002). http://link.springer.com/article/10.1023/A%3A1014679013888

[51] Zhong Minlin, Fan Peixun. Applications of laser nano manufacturing technologies[J]. Chinese J Lasers, 38, 0601001(2011).

[52] Meng H, Liao J, Zhou Y et al. Laser micro-processing of cardiovascular stent with fiber laser cutting system[J]. Optics & Laser Technology, 41, 300-302(2009). http://www.sciencedirect.com/science/article/pii/S0030399208001102

[53] Muhammad N, Whitehead D, Boor A. et al. Comparison of dry and wet fibre laser profile cutting of thin 316L stainless steel tubes for medical device applications[J]. Journal of Materials Processing Technology, 210, 2261-2267(2010). http://www.sciencedirect.com/science/article/pii/S0924013610002578

[54] Hendricks F, Patel R, Matylitsky V V. Micromachining of bio-absorbable stents with ultra-short pulse lasers[C]. SPIE, 9355, 935502(2015).

[55] Kathuria Y P. Laser microprocessing of metallic stent for medical therapy[J]. Journal of Materials Processing Technology, 170, 545-550(2005). http://www.sciencedirect.com/science/article/pii/S0924013605006412

[56] Huang Yuan, Tian Zheng, Liu Wenxi et al. Influence of process techniques on biocompatibility of coronary artery stent[J]. Journal of Tianjin University (Sci Technol), 36, 374-379(2003).

[57] Zeng R, Dietzel W, Witte F. et al. Progress and challenge for magnesium alloys as biomaterials[J]. Advanced Engineering Materials, 10, B3-B14(2008). http://onlinelibrary.wiley.com/doi/10.1002/adem.200800035/full

[58] Farè S, Ge Q, Vedani M. et al. Evaluation of material properties and design requirements for biodegradable magnesium stents[J]. Matéria, 15, 96-103(2010). http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762010000200002&lng=pt&nrm=iso&tlng=en

[59] Demir A G, Previtali B, Colombo D et al. Fiber laser micromachining of magnesium alloy tubes for biocompatible and biodegradable cardiovascular stents[C]. SPIE, 8237, 823730(2012).

[61] Stolberg K, Friedel S, Kremser B et al. IR and green femtosecond laser machining of heat sensitive materials for medical devices at micrometer scale[C]. SPIE, 8968, 89680E(2014).

[62] Cheng Ping, Wei Di, Wu Benke et al. Femtosecond laser precision machining of biodegradable heart stent[J]. Optics and Precision Engineering, 22, 63-68(2014).

[63] Langer R, Vacanti J P. Tissue engineering[J]. Science, 260, 920-926(1993).

[64] Prabhakaran M P, Venugopal J, Kai D et al. Biomimetic material strategies for cardiac tissue engineering[J]. Materials Science and Engineering: C, 31, 503-513(2011). http://www.sciencedirect.com/science/article/pii/S0928493111000105

[65] Chiu Y W, Chen W P, Su C C et al. The arrhythmogenic effect of self-assembling nanopeptide hydrogel scaffolds on neonatal mouse cardiomyocytes[J]. Nanomedicine: Nanotechnology, Biology and Medicine, 10, 1065-1073(2014). http://www.ncbi.nlm.nih.gov/pubmed/24491398

[66] Saranya N, Saravanan S, Moorthi A et al. Enhanced osteoblast adhesion on polymeric nano-scaffolds for bone tissue engineering[J]. Journal of Biomedical Nanotechnology, 7, 238-244(2011). http://www.ncbi.nlm.nih.gov/pubmed/21702361

[67] Heinemann S, Heinemann C, Jager M et al. Effect of silica and hydroxyapatite mineralization on the mechanical properties and the biocompatibility of nanocomposite collagen scaffolds[J]. ACS Applied Materials & Interfaces, 3, 4323-4331(2011). http://europepmc.org/abstract/MED/21942510

[68] Anastasiou A D, Thomson C L, Hussain S A. et al. Sintering of calcium phosphates with a femtosecond pulsed laser for hard tissue engineering[J]. Materials & Design, 101, 346-354(2016). http://www.sciencedirect.com/science/article/pii/S026412751630452X

[69] Landers R, Hubner U, Schmelzeisen R et al. Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering[J]. Biomaterials, 23, 4437-4447(2002). http://onlinelibrary.wiley.com/resolve/reference/PMED?id=12322962

[70] Wiria F E, Chua C K, Leong K F et al. Improved biocomposite development of poly (vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering[J]. Journal of Materials Science: Materials in Medicine, 19, 989-996(2008). http://www.emeraldinsight.com/servlet/linkout?suffix=b98&dbid=16&doi=10.1108%2FRPJ-03-2012-0023&key=10.1007%2Fs10856-007-3176-5

[71] Kolan K C R, Leu M C, Hilmas G E et al. . Effect of material, process parameters, and simulated body fluids on mechanical properties of 13-93 bioactive glass porous constructs made by selective laser sintering[J]. Journal of the Mechanical Behavior of Biomedical Materials, 13, 14-24(2012). http://www.sciencedirect.com/science/article/pii/S1751616112001087

[72] Sobral J M, Caridade S G, Sousa R A et al. Three-dimensional plotted scaffolds with controlled pore size gradients: effect of scaffold geometry on mechanical performance and cell seeding efficiency[J]. Acta Biomaterialia, 7, 1009-1018(2011). http://europepmc.org/abstract/MED/21056125

[73] Van Bael S, Chai Y C, Truscello S et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds[J]. Acta Biomaterialia, 8, 2824-2834(2012). http://europepmc.org/abstract/MED/22487930

[74] Chu T M G. In vivo evaluation of 13-93 bioactive glass scaffolds made by selective laser sintering (SLS)[J]. Biomaterials Science: Processing, Properties and Applications II: Ceramic Transactions, 237, 91-99(2012). http://onlinelibrary.wiley.com/doi/10.1002/9781118511466.ch10/summary

[75] Fukuda A, Takemoto M, Saito T et al. Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting[J]. Acta Biomaterialia, 7, 2327-2336(2011). http://www.ncbi.nlm.nih.gov/pubmed/21295166

[76] Li Xiang, Li Dichen, Wang Lin et al. Fabrication of bone tissue engineering scaffolds based on RP and analysis of biological properties[J]. China Mechanical Engineering, 16, 1117-1120(2005).

[77] Huang W, Feng P, Gao C et al. Microstructure, mechanical, and biological properties of porous poly (vinylidene fluoride) scaffolds fabricated by selective laser sintering[J]. International Journal of Polymer Science, 2015, 132965(2015). http://www.researchgate.net/publication/277911248_Microstructure_Mechanical_and_Biological_Properties_of_Porous_Polyvinylidene_fluoride_Scaffolds_Fabricated_by_Selective_Laser_Sintering

[78] Shuai C, Feng P, Zhang L et al. Correlation between properties and microstructure of laser sintered porous β-tricalcium phosphate bone scaffolds[J]. Science and Technology of Advanced Materials, 14, 055002(2016). http://pubmedcentralcanada.ca/pmcc/articles/PMC5090372/

[79] Van Bael S, Chai Y C, Truscello S et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds[J]. Acta Biomaterialia, 8, 2824-2834(2012). http://europepmc.org/abstract/MED/22487930

[80] Leong K F, Cheah C M, Chua C K. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs[J]. Biomaterials, 24, 2363-2378(2003). http://www.sciencedirect.com/science/article/pii/S0142961203000309