[1] Lu H T, Pan J J, Gu Y et al. Comparison of melt evolution and flow mechanisms of Inconel 718, Ti6Al4V, 304 stainless steel, and AlSi10Mg manufactured by laser powder bed fusion, structures, and properties after heat treatments[J]. Materials Science and Engineering: A, 865, 144649(2023).

[2] Saeidi K, Gao X, Lofaj F et al. Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting[J]. Journal of Alloys and Compounds, 633, 463-469(2015).

[3] Carassus H, Guérin J D, Morvan H et al. An experimental investigation into influences of build orientation and specimen thickness on quasi-static and dynamic mechanical responses of selective laser melting 316L stainless steel[J]. Materials Science and Engineering: A, 835, 142683(2022).

[4] Chen C Y, Liu L T, Zhao R X et al. Microstructure evolution and mechanical properties of laser additive manufactured Ti6Al4V alloy under nitrogen-argon reactive atmosphere[J]. Materials Science and Engineering: A, 841, 143076(2022).

[5] Wang Z, Huang S, Lu H F et al. The role of annealing heat treatment in high-temperature oxidation resistance of laser powder bed fused Ti6Al4V alloy subjected to massive laser shock peening treatment[J]. Corrosion Science, 209, 110732(2022).

[6] Zhang L L, Zhou Y, Yang X et al. Effect of heat input on the microstructure and mechanical properties of the deposition obtained by selective laser melting (SLM) of precipitation hardened martensitic stainless steel[J]. Materials Characterization, 203, 113093(2023).

[7] Polishetty A, Shunmugavel M, Goldberg M et al. Cutting force and surface finish analysis of machining additive manufactured titanium alloy Ti-6Al-4V[J]. Procedia Manufacturing, 7, 284-289(2017).

[8] Huang Y B, Yang S L, Gu J X et al. Microstructure and wear properties of selective laser melting 316L[J]. Materials Chemistry and Physics, 254, 123487(2020).

[9] Voisin T, Forien J B, Perron A et al. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion[J]. Acta Materialia, 203, 116476(2021).

[10] Shin W S, Son B, Song W S et al. Heat treatment effect on the microstructure, mechanical properties, and wear behaviors of stainless steel 316L prepared via selective laser melting[J]. Materials Science and Engineering: A, 806, 140805(2021).

[11] Kale A B, Kim B K, Kim D I et al. An investigation of the corrosion behavior of 316L stainless steel fabricated by SLM and SPS techniques[J]. Materials Characterization, 163, 110204(2020).

[12] Sakurai T, Umezawa O. Fracture toughness and martensitic transformation in type 316LN austenitic stainless steel extra-thick plates at 4.2 K[J]. Materials Science and Engineering: A, 862, 144122(2023).

[13] Zhang A, Wu W P, Jiang P et al. Microstructural characterization and mechanical properties of 316l stainless steel parts prepared by laser powder bed fusion (L-PBF) additive manufacturing[J]. Chinese Journal of Lasers, 51, 1202303(2024).

[14] Wang Y Y, Sun M Y, Chen J et al. Effects of heat treatment temperature on impact toughness and anisotropy of 316l stainless steel formed by selective laser melting[J]. Chinese Journal of Lasers, 51, 1202302(2024).

[15] Li W Q, Meng L X, Wang S et al. Plastic deformation behavior and strengthening mechanism of SLM 316L reinforced by micro-TiC particles[J]. Materials Science and Engineering: A, 884, 145557(2023).

[16] Liu H X, He J Q, Jin Z Y et al. Pitting corrosion behavior and mechanism of 316L stainless steel induced by marine fungal extracellular polymeric substances[J]. Corrosion Science, 224, 111485(2023).

[17] Zheng Z J, Mao L Y, Dong Z H. Effect of microstructural anisotropy on corrosion resistance of 316L stainless steel prepared by additive manufacturing[J]. Chinese Journal of Lasers, 50, 0402012(2023).

[18] Lei Y B, Wang Z B, Zhang B et al. Enhanced mechanical properties and corrosion resistance of 316L stainless steel by pre-forming a gradient nanostructured surface layer and annealing[J]. Acta Materialia, 208, 116773(2021).

[19] Peng L Y, Zhang Z Y, Tan J B et al. Effects of boric acid and lithium hydroxide on the corrosion behaviors of 316LN stainless steel in simulating hot functional test high-temperature pressurized water[J]. Corrosion Science, 198, 110157(2022).

[20] Lu Y, Guan Y C, Li Y et al. Nanosecond laser fabrication of superhydrophobic surface on 316L stainless steel and corrosion protection application[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 604, 125259(2020).

[21] Li S H, Zhao Y K, Kumar P et al. Effect of initial dislocation density on the plastic deformation response of 316L stainless steel manufactured by directed energy deposition[J]. Materials Science and Engineering: A, 851, 143591(2022).

[22] Singh J, Singh R, Singh H. Dimensional accuracy and surface finish of biomedical implant fabricated as rapid investment casting for small to medium quantity production[J]. Journal of Manufacturing Processes, 25, 201-211(2017).

[23] Kumar P, Ahuja I S, Singh R. Experimental investigations on hardness of the biomedical implants prepared by hybrid investment casting[J]. Journal of Manufacturing Processes, 21, 160-171(2016).

[24] Chen X H, Li J, Cheng X et al. Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing[J]. Materials Science and Engineering: A, 715, 307-314(2018).

[25] Yakout M, Elbestawi M A, Veldhuis S C. A study of the relationship between thermal expansion and residual stresses in selective laser melting of Ti-6Al-4V[J]. Journal of Manufacturing Processes, 52, 181-192(2020).

[26] Doubenskaia M, Domashenkov A, Smurov I et al. Study of selective laser melting of intermetallic TiAl powder using integral analysis[J]. International Journal of Machine Tools and Manufacture, 129, 1-14(2018).

[27] Brenne F, Niendorf T. Damage tolerant design by microstructural gradation-influence of processing parameters and build orientation on crack growth within additively processed 316L[J]. Materials Science and Engineering: A, 764, 138186(2019).

[28] van Nuland T F W, Palmeira Belotti L, Hoefnagels J P M et al. Microstructural modeling and measurements of anisotropic plasticity in large scale additively manufactured 316L stainless steel[J]. European Journal of Mechanics - A/Solids, 96, 104710(2022).

[29] Lamb K, Koube K, Kacher J et al. Anisotropic spall failure of additively manufactured 316L stainless steel[J]. Additive Manufacturing, 66, 103464(2023).

[30] Bahshwan M, Gee M, Nunn J et al. In situ observation of anisotropic tribological contact evolution in 316L steel formed by selective laser melting[J]. Wear, 490, 204193(2022).

[31] Moghadas S M J, Yeganeh M, Zaree S R A et al. Influence of low temperature heat treatment on microstructure, corrosion resistance and biological performance of 316L stainless steel manufactured by selective laser melting[J]. CIRP Journal of Manufacturing Science and Technology, 40, 68-74(2023).

[32] Habassi F, Houria M, Barka N et al. Influence of post-treatment on microstructure and mechanical properties of additively manufactured C300 maraging steel[J]. Materials Characterization, 202, 112980(2023).

[33] Qi Y, Zhang H, Zhang W Q et al. Heat treatment of Al-Cu-Li-Sc-Zr alloy produced by laser powder bed fusion[J]. Materials Characterization, 195, 112505(2023).

[34] Chacón-Fernández S, Martín A P, García A P. Influence of post-weld heat treatments on the formation of the sigma phase and the corrosion resistance of S32001 steel[J]. Materials Today Communications, 37, 107197(2023).

[35] Wang Q J, Shao H J, Zhang X et al. Study of thermal behavior and microstructure formation mechanism of CuCrZr alloy melted by laser powder bed fusion[J]. Materials Characterization, 198, 112721(2023).

[36] Salman O O, Gammer C, Chaubey A K et al. Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting[J]. Materials Science and Engineering: A, 748, 205-212(2019).

[37] Dixit S, Liu S Y, Murdoch H A et al. Investigating build orientation-induced mechanical anisotropy in additive manufacturing 316L stainless steel[J]. Materials Science and Engineering: A, 880, 145308(2023).

[38] Elangeswaran C, Cutolo A, Muralidharan G K et al. Microstructural analysis and fatigue crack initiation modelling of additively manufactured 316L after different heat treatments[J]. Materials & Design, 194, 108962(2020).

[39] Chao Q, Thomas S, Birbilis N et al. The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel[J]. Materials Science and Engineering: A, 821, 141611(2021).

[40] Güden M, Yavaş H, Tanrıkulu A A et al. Orientation dependent tensile properties of a selective-laser-melt 316L stainless steel[J]. Materials Science and Engineering: A, 824, 141808(2021).

[41] Zhang S T, Bi F Q, Wu T et al. Microstructural investigation of the effect of hot-isostatic-pressing treatment on a laser powder bed fused type 316L stainless steel[J]. Materials Characterization, 197, 112716(2023).

[42] Grech I S, Sullivan J H, Lancaster R J et al. The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion[J]. Additive Manufacturing, 58, 103072(2022).

[43] Abbasi Z, Abedi H R. Dynamic recrystallization behavior of selective laser melted 316L stainless steel[J]. Journal of Materials Research and Technology, 27, 6458-6473(2023).

[44] Wang Z, Bian H R, Lu H F et al. Significant improvement in the strength-toughness and isotropy of laser powder bed fused Ti6Al4V alloy by combining heat treatment with subsequent laser shock peening[J]. Materials Science and Engineering: A, 880, 145365(2023).