[1] Yang J J, Yu H C, Han J et al. β-transus temperature of selective laser melted TC4 alloy[J]. Transactions of Materials and Heat Treatment, 37, 80-85(2016).

[2] Qi Z J, Zhang X X, Wang Y Y et al. Effect of B on microstructure and tensile properties of laser additive manufactured TC4 alloy[J]. Chinese Journal of Lasers, 47, 0602002(2020).

[3] Lutjering G, Williams J C[M]. Titanium(2007).

[4] Liu R, Cui Y, Liu L et al. A primary study of the effect of hydrostatic pressure on stress corrosion cracking of Ti-6Al-4V alloy in 3.5% NaCl solution[J]. Corrosion Science, 165, 108402(2020).

[5] Traverso P, Canepa E. A review of studies on corrosion of metals and alloys in deep-sea environment[J]. Ocean Engineering, 87, 10-15(2014).

[6] Hu Y, Shi Y H, Sun K et al. Microstructure evolution and mechanical performance of underwater local dry welded DSS metals at various simulated water depths[J]. Journal of Materials Processing Technology, 264, 366-376(2019).

[7] Lin X, Huang W D. High performance metal additive manufacturing technology applied in aviation field[J]. Materials China, 34(2015).

[8] Wang P Q, Wang Y Y, Wu M J et al. Effects of heat treatment on microstructure, mechanical properties, and anisotropy of laser melting deposited TC4[J]. Chinese Journal of Lasers, 48, 1002116(2021).

[9] Wang Z D, Sun G F, Lu Y et al. High-performance Ti-6Al-4V with graded microstructure and superior properties fabricated by powder feeding underwater laser metal deposition[J]. Surface and Coatings Technology, 408, 126778(2021).

[10] Wang Z D, Sun G F, Chen M Z et al. Investigation of the underwater laser directed energy deposition technique for the on-site repair of HSLA-100 steel with excellent performance[J]. Additive Manufacturing, 39, 101884(2021).

[11] Li J Q, Lin X, Guo P F et al. Electrochemical behaviour of laser solid formed Ti-6Al-4V alloy in a highly concentrated NaCl solution[J]. Corrosion Science, 142, 161-174(2018).

[12] Li J Q, Lin X, Wang J et al. Effect of stress-relief annealing on anodic dissolution behaviour of additive manufactured Ti-6Al-4V via laser solid forming[J]. Corrosion Science, 153, 314-326(2019).

[13] Qin T, Lin X, Yu J et al. Performance of different microstructure on electrochemical behaviors of laser solid formed Ti-6Al-4V alloy in NaCl solution[J]. Corrosion Science, 185, 109392(2021).

[14] Feng X T, Gu H, Zhou S F et al. Microstructure and electrochemical corrosion behavior of TC4 titanium alloy cladding layer prepared with powder feeding laser additive manufacturing[J]. Chinese Journal of Lasers, 46, 0302003(2019).

[15] Dai N W, Zhang L C, Zhang J X et al. Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes[J]. Corrosion Science, 111, 703-710(2016).

[16] Ettefagh A H, Zeng C Y, Guo S M et al. Corrosion behavior of additively manufactured Ti-6Al-4V parts and the effect of post annealing[J]. Additive Manufacturing, 28, 252-258(2019).

[17] Chandramohan P, Bhero S, Obadele B A et al. Laser additive manufactured Ti-6Al-4V alloy: tribology and corrosion studies[J]. The International Journal of Advanced Manufacturing Technology, 92, 3051-3061(2017).

[18] Fu Y L, Guo N, Cheng Q et al. In-situ formation of laser-cladded layer on Ti-6Al-4V titanium alloy in underwater environment[J]. Optics and Lasers in Engineering, 131, 106104(2020).

[19] Zhao Y H, Wang Z G, Zhao J B et al. Influence of substrate cooling condition on properties of laser deposited AlSi10Mg alloys[J]. Acta Optica Sinica, 40, 1114002(2020).

[20] Wang Z D, Yang K, Chen M Z et al. Investigation of the microstructure and mechanical properties of Ti-6Al-4V repaired by the powder-blown underwater directed energy deposition technique[J]. Materials Science and Engineering A, 831, 142186(2022).

[21] Chen G, Li L T, Qiao J W et al. Gradient hierarchical grain structures of Al0.1CoCrFeNi high-entropy alloys through dynamic torsion[J]. Materials Letters, 238, 163-166(2019).

[22] Heakal F E T, Ghoneim A A, Mogoda A S et al. Electrochemical behaviour of Ti-6Al-4V alloy and Ti in azide and halide solutions[J]. Corrosion Science, 53, 2728-2737(2011).

[23] Andreatta F, Lanzutti A, Vaglio E et al. Corrosion behaviour of 316L stainless steel manufactured by selective laser melting[J]. Materials and Corrosion, 70, 1633-1645(2019).

[24] Kumar S, Chattopadhyay K, Singh V. Effect of surface nanostructuring on corrosion behavior of Ti-6Al-4V alloy[J]. Materials Characterization, 121, 23-30(2016).

[25] Yang K, Wang Z D, Chen M Z et al. Effect of pulse frequency on the morphology, microstructure, and corrosion resistance of high-nitrogen steel prepared by laser directed energy deposition[J]. Surface and Coatings Technology, 421, 127450(2021).

[26] Fasasi A Y, Mwenifumbo S, Rahbar N et al. Nano-second UV laser processed micro-grooves on Ti6Al4V for biomedical applications[J]. Materials Science and Engineering C, 29, 5-13(2009).

[27] Tomashov N D, Chernova G P, Ruscol Y S et al. The passivation of alloys on titanium bases[J]. Electrochimica Acta, 19, 159-172(1974).

[28] Chen J R, Tsai W T. In situ corrosion monitoring of Ti-6Al-4V alloy in H2SO4/HCl mixed solution using electrochemical AFM[J]. Electrochimica Acta, 56, 1746-1751(2011).

[29] Atapour M, Pilchak A L, Frankel G S et al. Corrosion behavior of β titanium alloys for biomedical applications[J]. Materials Science and Engineering C, 31, 885-891(2011).