[1] [1] LIU W, XIE X H, LI S Y. Present state and perspectives of micromachined inertial sensors ［J］. Opt. Precision Eng., 2003,11(5):425-431. (in Chinese)

[2] [2] ALPER S E, AKIN T. Symmetrical and decoupled nickel microgyroscope on insulating substrate ［J］. Sensors and Actuators A: Physical, 2004,115(2-3):336-350.

[3] [3] HONG Y S, LEE J H, KIM S H. A laterally driven symmetric micro-resonator for gyroscopic applications ［J］. Journal of Micromechanics and Microengineering, 2000, 10(3):452-458.

[4] [4] KRANZ M. Design, simulation, and implementation of two novel micromechanical vibratory-rate gyroscopes ［D］. Pennsylvania: Carnegie Mellon University, 1998.

[5] [5] LI J M. Design of Capacitive Micromechanical Gyroscope ［M］. Beijing：National Defense Industrial Press，2006. (in Chinese)

[6] [6] GEIGER W, BUTT W U, GAIBER A, et al.. Decoupled microgyros and the design principle DAVED ［J］. Sensors and Actuators A:Physical, 2002,95(2-3):239-249.

[7] [7] XIE H, FEDDER G K. Fabrication, characterization, and analysis of a DRIE CMOS-MEMS gyroscope ［J］. IEEE Senssors Journal, 2003,3(5):622-631.

[8] [8] JIANG M, YANG F J, DONG E L, et al.. Analysis of mechanical characteristics in the double linear vibratory gyroscope using high speed photography ［J］. Opt. Precision Eng., 2006, 14(1):121-126. (in Chinese)

[9] [9] HAN J S, KWAK B M. Robust optimal design of a vibratory microgyroscope considering fabrication errors ［J］. Journal of Micromechanics and Microengineering, 2001, 11(6): 662-671.

[10] [10] MOCHIDA Y, TAMURA M, OHWADA K. A micromachined vibrating rate gyroscope with indepent beam for the drive and detection mode ［J］. Sensors and Actuators A: Physical, 2000, 80(2):170-178.

[11] [11] LING L B, LI Z G, ZHOU B L, et al.. The methods used to detect the sensor signal of the silicon micro-mechanical gyro［J］. Journal of Chinese Inertial Technology, 1999,7(4):61-64. (in Chinese)

[12] [12] ACAR C. Robust micromachined vibratory gyroscopes ［D］. Irvine University of California, 2004.

[13] [13] LI Z, YANG Z, XIAO Z, et al.. A bulk micromachined vibratory lateral gyroscope fabricated with wafer bonding and deep trench etching ［J］. Sensors and Actuators A: Physical, 2000, 83(1-3): 24-29.

[14] [14] LIU M, ZHOU B L. Research on mechanical-thermal noise in micromachined gyroscopes ［J］. Chinese Journal of Scientific Instrument, 2006, 27(S2):1163-1164. (in Chinese)

[15] [15] ZHOU H, TANG H L, SU W, et al.. Robust design of a MEMS gyroscope considering the worst-case tolerance ［C］. Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Xiamen, P.R. China: IEEE NEMS, 2010:1012-1016.