[5] [5] YU C, WU S C, ZHONG Y, et al. Application of through glass via (TGV) technology for sensors manufacturing and packaging[J]. Sensors, 2024, 24(1): 171.

[7] [7] BLANCHER C, KATHAPERUMAL M, LIU F H, et al. Demonstration of eight metal layer redistribution on glass substrate with fine features and microvia[C]//2023 IEEE 73rd Electronic Components and Technology Conference (ECTC), Orlando, FL, USA: Institute of Electrical and Electronics Engineers, 2023: 1744-1748.

[8] [8] GUPTA P, MORRISSEY P E, O'BRIEN P, et al. Impact of through glass vias filling on the performance of passive thermal cooling in photonic packages[C]//2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC), Sibiu, Romania: Institute of Electrical and Electronics Engineers, 2022: 391-397.

[9] [9] CHIEN H C, CHIEN C H, DAI M J, et al. Thermal characteristic and performance of the glass interposer with TGVs (through-glass via)[J]. International Symposium on Microelectronics, 2013, 2013(1): 000611-000617.

[12] [12] YANG Z, WANG Y, WANG H, et al. High-g MEMS shock threshold sensor integrated on a copper filling through-glass-via (TGV) substrate for surface mount application[C]//2015 Transducers-2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, USA: Institute of Electrical and Electronics Engineers, 2015: 291-294.

[15] [15] NOURAEI H, WODOSLAWSKY A, PAPINI M, et al. Characteristics of abrasive slurry jet micro-machining: A comparison with abrasive air jet micro-machining[J]. Journal of Materials Processing Technology, 2013, 213(10): 1711-1724.

[16] [16] HAGHBIN N, AHMADZADEH F, PAPINI M. Masked micro-channel machining in aluminum alloy and borosilicate glass using abrasive water jet micro-machining[J]. Journal of Manufacturing Processes, 2018, 35: 307-316.

[17] [17] KHAN A A, HAQUE M M. Performance of different abrasive materials during abrasive water jet machining of glass[J]. Journal of Materials Processing Technology, 2007, 191(1/2/3): 404-407.

[19] [19] ZHANG Z Y, HUANG L, JIANG Y J, et al. A study to explore the properties of electrochemical discharge effect based on pulse power supply[J]. International Journal of Advanced Manufacturing Technology, 2016, 85: 2107-2114.

[20] [20] JAWALKAR C S, SHARMA A K, KUMAR P. Investigations on performance of ECDM process using NaOH and NaNO3 electrolytes while micro machining soda lime glass[J]. International Journal of Manufacturing Technology & Management, 2014, 28(1/2/3): 80-93.

[22] [22] WANG L, HU X Y, LI H S, et al. Experimental investigation on the machining performance of honeycomb seal structures by using electrochemical discharge machining[J]. Journal of Manufacturing Processes, 2024, 124: 226-239.

[23] [23] DOKE A, BADADHE M A, DIXIT P. Enhancing the borosilicate glass micromachining by using mixed alkaline electrolytes in the ECDM process[J]. Materials and Manufacturing Processes, 2024, 39(9): 1224-1235.

[24] [24] GUPTA P K, DVIVEDI A, KUMAR P, et al. Effect of pulse duration on quality characteristics of blind hole drilled in glass by ECDM[J]. Materials and Manufacturing Processes, 2016, 31(13): 1740-1748.

[25] [25] BHARGAV K V J, BALAJI P S, SAHU R K. Micromachining of borosilicate glass using an electrolyte-sonicated--ECDM system[J]. Materials and Manufacturing Processes, 2023, 38(1): 64-77.

[26] [26] XU Y, JIANG B Y. Machining performance enhancement of deep micro drilling using electrochemical discharge machining under magnetohydrodynamic effect[J]. International Journal of Advanced Manufacturing Technology, 2021, 113(3/4): 883-892.

[28] [28] JIN J Y, YOO S, YOO B W, et al. Characterisation of silicon through-vias for wafer-level interconnection with glass reflows[J]. Electronics Letters, 2012, 48(21): 1354-1355.

[30] [30] TOAN N V, HAHNG S, SONG Y, et al. Fabrication of vacuum-sealed capacitive micromachined ultrasonic transducer arrays using glass reflow process[J]. Micromachines, 2016, 7(5): 76.

[31] [31] NAM Y J, YOON Y J, LEE S K, Et al. Fabrication of glass micropipette device using reflow processes and its integration with microfluidic channels for patch clamp recording of cell[J]. IEEE Sensors Journal, 2020, 20(24): 14694-14702.

[35] [35] ITO Y, SHINOMOTO R, NAGATO K, et al. Mechanisms of damage formation in glass in the process of femtosecond laser drilling[J]. Applied Physics A, 2018, 124(2): 181.

[36] [36] MATSUSAKA S, WATANABE T. Micro-machinability of silver-sodium ion-exchanged glass by UV nanosecond laser[J]. Journal of Materials Processing Technology, 2008, 202(1/2/3): 514-520.

[37] [37] CHO K, CHOI J, KO S H. 257 nm deep UV femtosecond laser ablation with minimized crack and chipping on display ultra-thin glass[J]. International Journal of Precision Engineering and Manufacturing, 2024, 25(2): 271-283.

[38] [38] CHUNG C K, LIN S L, WANG H Y, et al. Fabrication and simulation of glass micromachining using CO2 laser processing with PDMS protection[J]. Applied Physics A, 2013, 113(2): 501-507.

[39] [39] OSTHOLT R, AMBROSIUS N, KRUGER R A. High speed through glass via manufacturing technology for interposer[C]//USA: Proceedings of the 5th Electronics System-integration Technology Conference (ESTC), Helsinki, Finland: Institute of Electrical and Electronics Engineers, 2014: 1-3.

[40] [40] LIU J L, XIA C H, MING X F, et al. Optimization of laser-induced deep etching for TGV fabrication in fused silica[C]//USA: 2023 24th International Conference on Electronic Packaging Technology (ICEPT), Shihezi, China: Institute of Electrical and Electronics Engineers, 2023: 1-6.

[41] [41] KIM J, KIM S I, JOUNG Y H, et al. Two-step hybrid process of movable part inside glass substrate using ultrafast laser[J]. Micro and Nano Systems Letters, 2021, 9(1): 1-8.

[42] [42] GOTTMANN J, HERMANS M, REPIEV N, et al. Selective laser-induced etching of 3D precision quartz glass components for microfluidic applications-up-scaling of complexity and speed[J]. Micromachines, 2017, 8(4): 110.

[43] [43] REITZ B, EVERTZ A, BASTEN R, et al. Integrated multimode optical waveguides in glass using laser induced deep etching[J]. Applied Optics, 2024, 63(4): 895-903.

[44] [44] ACANFORA G, ANZINGER S, WINKLER B, et al. Laser-processed protective glass micromesh chips for acoustic MEMS sensors[J]. IEEE Sensors Journal, 2023, 23(24): 30194-30201.

[45] [45] CHEN L, YU D Q. Investigation of low-cost through glass vias formation on borosilicate glass by picosecond laser-induced selective etching[J]. Journal of Materials Science: Materials in Electronics, 2021, 32(12): 16481-16493.

[48] [48] KUDO H, AKAZAWA M, YAMADA S, et al. High-speed high-density cost-effective cu-filled through-glass-via channel for heterogeneous chip integration[C]//USA: 2019 International Conference on Electronics Packaging (ICEP), Niigata, Japan: Institute of Electrical and Electronics Engineers, 2019: 104-109.

[49] [49] TANAKA M, KURAMOCHI S, TAI T, et al. High frequency characteristics of glass interposer[C]//USA: 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Orlando, FL, USA: Institute of Electrical and Electronics Engineers, 2020: 601-610.

[50] [50] WU S S, LING H Q, XIE Y T, et al. Synergistic effect of additives on filling of tapered TGV vias by copper electroplating[C]//USA: IE2020 21st International Conference on Electronic Packaging Technology (ICEPT), Guangzhou, China: Institute of Electrical and Electronics Engineers, 2020: 1-4.

[51] [51] WANG Y X, MA S L, LIU X Q, et al. Partially filled TGV based on double sides cu conformal electroplating process for MEMS vacuum packaging[C]//USA: 2022 International Conference on Electronics Packaging (ICEP), Sapporo, Japan: Institute of Electrical and Electronics Engineers, 2022: 53-54.

[52] [52] LAI Z Q, LIU D, ZHAO T, et al. Directly electroplated metallization on through glass via (TGV) using silver nanowires conductive composite as seed layer[C]//USA: 2023 24th International Conference on Electronic Packaging Technology (ICEPT), Shihezi, China: Institute of Electrical and Electronics Engineers, 2023: 1-6.

[54] [54] K N, ROUT C S. Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications[J]. RSC Advances, 2021, 11(10): 5659-5697.

[55] [55] HONG P H, KONG D Y, NAM J W, et al. Low cost via-hole flling process using powder and solder[J]. Journal of Sensor Science and Technology, 2013, 22(2): 130-135.

[56] [56] BAEK K H, KIM D P, PARK K S, et al. Conformal deposition of an insulator layer and Ag nano paste filling of a through silicon via for a 3D interconnection[J]. Journal-Korean Physical Society, 2011, 59(3): 2252-2258.

[57] [57] HAM Y H, KIM D P, PARK K S, et al. Dual etch processes of via and metal paste filling for through silicon via process[J]. Thin Solid Films, 2011, 519(20): 6727-6731.

[59] [59] YU C, LI W, YANG T T, et al. TGV filling process based on low temperature conductive silver paste[C]//USA: 2023 24th International Conference on Electronic Packaging Technology (ICEPT), Shihezi, China: Institute of Electrical and Electronics Engineers, 2023: 1-4.