[1] Shamsaei N, Yadollahi A, Bian L K et al. An overview of direct laser deposition for additive manufacturing; Part II: mechanical behavior, process parameter optimization and control[J]. Additive Manufacturing, 8, 12-35(2015).

[2] Cooke S, Ahmadi K, Willerth S et al. Metal additive manufacturing: technology, metallurgy and modelling[J]. Journal of Manufacturing Processes, 57, 978-1003(2020).

[3] Zhang D, Qiu D, Gibson M A et al. Additive manufacturing of ultrafine-grained high-strength titanium alloys[J]. Nature, 576, 91-95(2019).

[4] Carroll B E, Palmer T A, Beese A M. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing[J]. Acta Materialia, 87, 309-320(2015).

[5] Shishkovsky I, Missemer F, Smurov I. Direct metal deposition of functional graded structures in Ti-Al system[J]. Physics Procedia, 39, 382-391(2012).

[6] Hong C, Gu D D, Dai D H et al. Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts：tailored microstructures and enhanced performance[J]. Materials Science and Engineering: A, 635, 118-128(2015).

[7] Kamath C, El-Dasher B, Gallegos G F et al. Density of additively-manufactured, 316L SS parts using laser powder-bed fusion atpowers up to 400 W[J]. The International Journal of Advanced Manufacturing Technology, 74, 65-78(2014).

[8] Yao Y Z, Huang Y H, Chen B et al. Influence of processing parameters and heat treatment on the mechanical properties of 18Ni300 manufactured by laser based directed energy deposition[J]. Optics & Laser Technology, 105, 171-179(2018).

[9] Zhong C L, Biermann T, Gasser A et al. Experimental study of effects of main process parameters on porosity, track geometry, deposition rate, and powder efficiency for high deposition rate laser metal deposition[J]. Journal of Laser Applications, 27, 042003(2015).

[10] Shipley H, McDonnell D, Culleton M et al. Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: a review[J]. International Journal of Machine Tools and Manufacture, 128, 1-20(2018).

[11] Zhang D Y, Feng Z, Wang C J et al. Modeling of temperature field evolution during multilayered direct laser metal deposition[J]. Journal of Thermal Spray Technology, 26, 831-845(2017).

[12] Thomas M, Baxter G J, Todd I. Normalised model-based processing diagrams for additive layer manufacture of engineering alloys[J]. Acta Materialia, 108, 26-35(2016).

[13] Wang Y M, Voisin T, McKeown J T et al. Additively manufactured hierarchical stainless steels with high strength and ductility[J]. Nature Materials, 17, 63-71(2018).

[14] Ion J C, Shercliff H R, Ashby M F. Diagrams for laser materials processing[J]. Acta Metallurgica et Materialia, 40, 1539-1551(1992).

[15] Narayana P L, Lee S, Choi S W et al. Microstructural response of β-stabilized Ti-6Al-4V manufactured by direct energy deposition[J]. Journal of Alloys and Compounds, 811, 152021(2019).

[16] Wolff S, Lee T, Faierson E et al. Anisotropic properties of directed energy deposition (DED)-processed Ti-6Al-4V[J]. Journal of Manufacturing Processes, 24, 397-405(2016).

[17] Bambach M, Sizova I, Szyndler J et al. On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing[J]. Journal of Materials Processing Technology, 288, 116840(2021).

[18] Ren Y M, Lin X, Guo P F et al. Low cycle fatigue properties of Ti-6Al-4V alloy fabricated by high-power laser directed energy deposition: experimental and prediction[J]. International Journal of Fatigue, 127, 58-73(2019).

[19] Zhai Y W, Lados D A, Brown E J et al. Understanding the microstructure and mechanical properties of Ti-6Al-4V and Inconel 718 alloys manufactured by laser engineered net shaping[J]. Additive Manufacturing, 27, 334-344(2019).

[20] Sterling A J, Torries B, Shamsaei N et al. Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V[J]. Materials Science and Engineering: A, 655, 100-112(2016).

[21] Zhao X, Lv Y, Dong S Y et al. The effect of thermal cycling on direct laser-deposited gradient H13 tool steel: microstructure evolution, nanoprecipitation behaviour, and mechanical properties[J]. Materials Today Communications, 25, 101390(2020).

[22] Wen J H, Zhang L J, Ning J et al. Laser additively manufactured intensive dual-phase steels and their microstructures, properties and corrosion resistance[J]. Materials & Design, 192, 108710(2020).

[23] Ma M M, Wang Z M, Wang D Z et al. Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel[J]. Optics & Laser Technology, 45, 209-216(2013).

[24] Kim D K, Woo W, Kim E Y et al. Microstructure and mechanical characteristics of multi-layered materials composed of 316L stainless steel and ferritic steel produced by direct energy deposition[J]. Journal of Alloys and Compounds, 774, 896-907(2019).

[25] Wei M, Yin X H, Wang Z et al. Additive manufacturing of a functionally graded material from Inconel625 to Ti6Al4V by laser synchronous preheating[J]. Journal of Materials Processing Technology, 275, 116368(2020).

[26] Jiang H Z, Li Z Y, Feng T et al. Effect of process parameters on defects, melt pool shape, microstructure, and tensile behavior of 316L stainless steel produced by selective laser melting[J]. Acta Metallurgica Sinica (English Letters), 34, 495-510(2021).

[27] Yang W H, Tarng Y S. Design optimization of cutting parameters for turning operations based on the Taguchi method[J]. Journal of Materials Processing Technology, 84, 122-129(1998).

[28] Zhou J, Liao C H, Shen H et al. Surface and property characterization of laser polished Ti6Al4V[J]. Surface and Coatings Technology, 380, 125016(2019).

[29] Mills K C[M]. Recommended values of thermophysical properties for selected commercial alloys(2002).

[30] Bermingham M J, Kent D, Zhan H et al. Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions[J]. Acta Materialia, 91, 289-303(2015).

[31] Qian L, Mei J, Liang J et al. Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti-6Al-4V samples[J]. Materials Science and Technology, 21, 597-605(2005).

[32] Vrancken B, Thijs L, Kruth J P et al. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting[J]. Acta Materialia, 68, 150-158(2014).

[33] Han J, Yang J J, Yu H C et al. Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density[J]. Rapid Prototyping Journal, 23, 217-226(2017).

[34] Kobryn P A, Semiatin S L. The laser additive manufacture of Ti-6Al-4V[J]. JOM, 53, 40-42(2001).

[35] Jiang H Z, Li Z Y, Feng T et al. Factor analysis of selective laser melting process parameters with normalised quantities and Taguchi method[J]. Optics & Laser Technology, 119, 105592(2019).

[36] Griffith M L, Schlienger M E, Harwell L D et al. Understanding thermal behavior in the LENS process[J]. Materials & Design, 20, 107-113(1999).

[37] Lewandowski J J, Seifi M. Metal additive manufacturing: a review of mechanical properties[J]. Annual Review of Materials Research, 46, 151-186(2016).

[38] Kistler N A, Corbin D J, Nassar A R et al. Effect of processing conditions on the microstructure, porosity, and mechanical properties of Ti-6Al-4V repair fabricated by directed energy deposition[J]. Journal of Materials Processing Technology, 264, 172-181(2019).

[39] Gong H J, Rafi K, Gu H F et al. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes[J]. Additive Manufacturing, 1/2/3/4, 87-98(2014).

[40] Zhang D, Zhao L, Liu A B et al. Understanding and controlling the influence of laser energy on penetration, porosity, and microstructure during laser welding[J]. Chinese Journal of Lasers, 48, 1502005(2021).

[41] Liu W, Chen C Y, Shuai S S et al. Study of pore defect and mechanical properties in selective laser melted Ti6Al4V alloy based on X-ray computed tomography[J]. Materials Science and Engineering: A, 797, 139981(2020).

[42] Montazeri M, Nassar A R, Stutzman C B et al. Heterogeneous sensor-based condition monitoring in directed energy deposition[J]. Additive Manufacturing, 30, 100916(2019).