[1] Li H G, Xu Y W, Hua X G et al. Bending failure mechanism and flexural properties of GLARE laminates with different stacking sequences[J]. Composite Structures, 187, 354-363(2018).

[2] Jing R M, Xu J J, Xiao R S et al. Simulation study of laser joining of carbon fiber reinforced plastics and titanium alloy[J]. Chinese Journal of Lasers, 50, 0802014(2023).

[3] Du L S, Huang Y X, Zhang F K. Simulation and experimental study on bolt connection failure of CFRP-aluminium alloy laminates[J]. Equipment Manufacturing Technology, 76-84, 91(2021).

[4] Qiu X Y, Li P N, Li C P et al. Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP[J]. Composite Structures, 203, 404-413(2018).

[5] Qiu J P, Chen J X, Zhou Y et al. Research on hole diameter deviation between layers in helical milling of CFRP/Ti stacks[J]. 航空制造技术, 66, 93-98,111(2023).

[6] Garcia R, Prabhakar P. Bond interface design for single lap joints using polymeric additive manufacturing[J]. Composite Structures, 176, 547-555(2017).

[7] Yan Y T, Liu B S, Xu T X et al. Realizing the air brazing of ZrO2 ceramics through Al metal[J]. Journal of Materiomics, 8, 662-668(2022).

[8] Persson B N J, Liu B S, Xu T X et al. Relation between interfacial separation and load: a general theory of contact mechanics[J]. Physical Review Letters, 99, 125502(2007).

[9] Hu W, Cai R L, Tan L M et al. Effect of mechanical surface treatments on bonding property to 6013 aluminum alloy[J]. Adhesion, 35, 45-49(2014).

[10] Mousa S, Kim G Y. A direct adhesion of metal-polymer-metal sandwich composites by warm roll bonding[J]. Journal of Materials Processing Technology, 239, 133-139(2017).

[11] Zou T C, Liu Z H, Li Y et al. Effect of plasma surface treatment on bonding properties and surface properties of CFRP[J]. China Surface Engineering, 35, 125-134(2022).

[12] Su F, Li W Y, Li C J. Research on laser processing of fiber reinforced plastics[J]. Aerospace Materials & Technology, 51, 1-9(2021).

[13] Zhang Z, Shan J G, Tan X H et al. Improvement of the laser joining of CFRP and aluminum via laser pre-treatment[J]. The International Journal of Advanced Manufacturing Technology, 90, 3465-3472(2017).

[14] Chen Y J, Lu W T, Yang Y T. Optimization of laser paint removal process for carbon fiber composite substrates based on response surface analysis[J]. Chinese Journal of Lasers, 50, 1202005(2023).

[15] Zou T C, Fu J, Li L H et al. Effect of overlap length on tensile properties and failure characteristics of CFRP single-lap adhesive joints[J]. Journal of Materials Engineering, 49, 158-165(2021).

[16] Du T T, Ye Y X, Liu Y F et al. Tailoring CFRP composite surface wettability with nanosecond laser and its effect on bonding performance[J]. Acta Materiae Compositae Sinica, 38, 1435-1445(2021).

[17] Liu Y F, Zhou B S, Zhang T et al. Laser joining of carbon fiber reinforced plastics to titanium alloy via laser texturing[J]. Chinese Journal of Lasers, 49, 1803001(2022).

[18] Özgür Bora M, Çoban O, Akman E et al. Comparison of novel surface treatments of Al2024 alloy for al/cfrp adhesive bonded joints[J]. International Journal of Adhesion and Adhesives, 103, 102721(2020).

[19] Xie Y X, Yang B B, Lu L S et al. Shear strength of bonded joints of carbon fiber reinforced plastic (CFRP) laminates enhanced by a two-step laser surface treatment[J]. Composite Structures, 232, 111559(2020).

[20] Zhou X K, Xue W, Liu W W et al. Quadri-directionally anisotropic droplets sliding surfaces fabricated by selective laser texturing of aluminum alloy plates[J]. Applied Surface Science, 509, 145406(2020).

[21] Herzog D, Jaeschke P, Meier O et al. Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP[J]. International Journal of Machine Tools and Manufacture, 48, 1464-1473(2008).

[22] Lin W C, Li X P, Dong W P et al. Ultrahigh bonding strength and excellent corrosion resistance of Al-TPU hybrid induced by microstructures and silane layer[J]. Journal of Materials Processing Technology, 296, 117180(2021).

[23] Zhu W, Xiao H, Wang J et al. Characterization and properties of AA6061-based fiber metal laminates with different aluminum-surface pretreatments[J]. Composite Structures, 227, 111321(2019).

[24] Reitz V, Meinhard D, Ruck S et al. A comparison of IR- and UV-laser pretreatment to increase the bonding strength of adhesively joined aluminum/CFRP components[J]. Composites Part A: Applied Science and Manufacturing, 96, 18-27(2017).

[25] Harder S, Schmutzler H, Hergoss P et al. Effect of infrared laser surface treatment on the morphology and adhesive properties of scarfed CFRP surfaces[J]. Composites Part A: Applied Science and Manufacturing, 121, 299-307(2019).