[1] Vijayan P K, Nayak A K. Natural circulation systems: advantages and challenges[R](2005).

[2] Durbin S, Lindgren E R. Summary of zirconium fire investigations during spent fuel pool complete LOCAs[R](2017).

[3] Adorni M, Herranz L E, Hollands T et al. OECD/NEA Sandia Fuel Project phase I: Benchmark of the ignition testing[J]. Nuclear Engineering and Design, 307, 418-430(2016).

[4] Ni S, Liu M L, Gu H Y. Modeling and validation of RELAP5 for natural circulation flow in a single PWR fuel assembly[J]. Annals of Nuclear Energy, 151, 107940(2021).

[5] Liu M L, Wang L, Ni S et al. Experimental investigation on pressure drop of a PWR fuel assembly under low Re conditions[J]. Annals of Nuclear Energy, 167, 108768(2022).

[6] Skolik K, Trivedi A, Perez-Ferragut M et al. Assessment of RELAP/SCDAPSIM for turbine trip transient in NuScale-SMR[C](2018).

[7] Liu M L, Brown N R, Terrani K A et al. Potential impact of accident tolerant fuel cladding critical heat flux characteristics on the high temperature phase of reactivity initiated accidents[J]. Annals of Nuclear Energy, 110, 48-62(2017).

[8] McKinnon M A, Michener T E, Jensen M F et al. Testing and analyses of the TN-24P PWR spent-fuel dry storage cask loaded with consolidated fuel[R](1989).

[9] Bates J M. Single PWR spent fuel assembly heat transfer data for computer code evaluations[R](1986).

[10] Sanchez L C, Hudson M. Determination of effective thermal conductivities for a full-scale mock-up of a 217-element breeder reactor fuel assembly subjected to normal shipping conditions[R](1986).

[11] Manteufel R D. Heat transfer in an enclosed rod array[D](1991).

[12] Manteufel R D, Todreas N E. Analytic formulae for the effective conductivity of a square or hexagonal array of parallel tubes[J]. International Journal of Heat and Mass Transfer, 37, 647-657(1994).

[13] Manteufel R D, Todreas N E. Effective thermal conductivity and edge conductance model for a spent-fuel assembly[J]. Nuclear Technology, 105, 421-440(1994).

[14] Boyd C F, Nuclear Regulatory Commission Division of Systems Analysis and Regulatory Effectiveness U S[M]. Predictions of spent fuel heatup after a complete loss of spent fuel pool coolant(2000).

[15] Venigalla V V R, Greiner M. Use of geometrically accurate fuel models to predict cladding and basket temperatures within a truck cask during normal transport[J]. Nuclear Technology, 167, 313-324(2009).

[16] Kamichetty K K, Venigalla V, Greiner M. Development, use, and accuracy of a homogenized fuel region model for thermal analysis of a truck package under normal and fire accident conditions[J]. Journal of Pressure Vessel Technology, 136, 021208(2014).

[17] Greiner M, Gangadharan K K, Gudipati M. Use of fuel assembly/backfill gas effective thermal conductivities to predict basket and fuel cladding temperatures within a rail package during normal transport[J]. Nuclear Technology, 160, 325-336(2007).

[18] Lindgren E, Durbin S. Characterization of thermal-hydraulic and ignition phenomena in prototypic, full-length boiling water reactor spent fuel pool assemblies after a complete loss-of-coolant accident[R](2007).

[19] Lindgren E R, Durbin S G. Laminar hydraulic analysis of a commercial pressurized water reactor fuel assembly[R](2013).

[20] Adorni M, Esmaili H, Grant W et al. Status report on spent fuel pools under loss-of-cooling and loss-of-coolant accident conditions-final report[R](2015).

[21] LIAO Feiye, CHEN Wenhu, GUO Chao et al. Study on severe accident occurred in spent fuel pool based on ASTEC code[J]. Nuclear Science and Engineering, 42, 199-206(2022).

[22] Tsao P C, Hsieh K T, Lee D S et al. Investigation of passive air cooling capacity for spent fuel pool[C](2013).

[23] LU Yuzhou, YUN Xiangyu, ZHANG Huiyong et al. Experimental research of air natural circulation and hydrogen distribution in fuel building after loss of coolant accident[J]. Atomic Energy Science and Technology, 54, 916-922(2020).

[24] Liu M L, Ni S, Wang X W et al. Experimental study on the natural circulation behavior of a full-scale PWR fuel assembly[J]. Annals of Nuclear Energy, 174, 109172(2022).

[25] Forat C, Florentin F[M]. The AFA 3G fuel assembly: a proven design for high burnups, 73-82(1999).

[26] Herranz L E, Penalva J, Feria F. CFD analysis of a cask for spent fuel dry storage: model fundamentals and sensitivity studies[J]. Annals of Nuclear Energy, 76, 54-62(2015).

[27] SHEN Weidao[M]. Engineering thermodynamics(1983).

[28] TIAN Li'nan. Calculation of thermal conductivity of pure gas, mixed gas and liquid[J]. Chemical Fertilizer Design, 34, 19-22, 3(1996).

[29] Lemmon E W, Jacobsen R T, Penoncello S G et al. Thermodynamic properties of air and mixtures of nitrogen, argon, and oxygen from 60 to 2 000 K at pressures to 2 000 MPa[J]. Journal of Physical and Chemical Reference Data, 29, 331-385(2000).

[30] Wagner W, Pruß A. The IAPWS formulation 1995 for the thermodynamic properties of ordinary water substance for general and scientific use[J]. Journal of Physical and Chemical Reference Data, 31, 387-535(2002).

[31] Kiijarvi J. Darcy friction factor formulae in turbulent pipe flow[J]. Lunowa Fluid Mechanics Paper, 110727, 1-11(2011).

[32] KONG Long[M]. Engineering fluid mechanics(2014).

[33] YU Ping'an, ZHU Rui'an, YU Zhenwan et al[M]. Thermal analysis of nuclear reactors(2002).

[34] Moorthi A, Sharma A K. Laminar fluid flow and heat transfer in non-circular sub-channel geometries of nuclear fuel bundle[J]. Progress in Nuclear Energy, 103, 243-253(2018).