[2] Lee Y W, Choi S H, Lee J S et al. Investigation of amorphous igzo tft employing ti/cu source/drain and sinx passivation[J]. Mrs Proceedings, 1906, 1321(2011).

[3] Kim Byoung O, Kim Jeong Hyun, Heehwan Choe et al. Novel fabrication of back channel etching type InGaZnO thin film transistors with MoTa source/drain[J]. Nanoscience and Nanotechnology Letters, 8, 572-576(2016).

[5] Heikenfeld J, Drzaic P, Yeo J S et al. A critical review of the present and future prospects for electronic paper[J]. Society for Information Display, 19, 129-156(2011).

[6] Zhan R, Dong C, Shi J et al. Effects of interface and bulk states on the stability of amorphous InGaZnO thin film transistors under gate bias and temperature stress[J]. SID 2013 DIGEST, 1047-1050(2013).

[8] Capecchi S. Low undercut Ti etch chemistry for Cu bump pillar under bump metallization wet etch process[J]. Solid Stat Phenomena, 255, 291-296(2016).

[9] Ça kır Orhan. Review of etchants for copper and its alloys in wet etching processes[J]. Key Engineering Materials, 364-366, 460-465(2008).

[10] Leschkies K S. Development of an all wet etch process chemistry for the patterning of metal conductors in IGZO thin film transistors[J]. ECS Transactions, 58, 287-297(2013).

[11] Colades James I, Su Chia-Chi et al. Comparison of dimethyl sulfoxide degradation by different fenton processes[J]. Chemical Engineering Journal, 232, 418-424(2013).

[12] Seo Bo-Hyun, Lee Sang Hyuk et al. Effect of nitric acid on wet etching behavior of Cu/Mo for TFT application[J]. Current Applied Physics, 11, 262-265(2011).