[1] [1] YIN Bohua, CHU Mingzhang, LIN Yunsheng, et al.Application of CD-AFM in the detection process of 45 nm node semiconductor chips［J］.Journal of Electron Microscopy, 2009, 28(2): 127-130.

[2] [2] XUE Wei,LI Jiadong,XIE Jie, et al.Study on the one-time molding process of silicon-based self-sharpening nanoneedle tip［J］.Piezoelectrics & Acoustooptics, 2013, 35(1): 125-128.

[3] [3] KROHS F, FATIKOW S.Novel high-resolution sidewall imaging using standard Atomic Force Microscopy equipment: Exceeding surface scanning using customized FIB-milled AFM tips in torsional feedback mode［C］∥Oldenburg, Germany: 2013 Seventh International Conference on Sensing Technology, 2013: 608-611.

[4] [4] ORJI N G, DIXSON R G, NG B P, et al.Contour metrology using critical dimension atomic force microscopy［J］.Journal of Micro/Nanolithography, MEMS, and MOEMS, 2016, 15(4): 044006.

[5] [5] BAO T, MININNI L, DAWSON D.Improving sidewall profile metrology with enhanced 3D-AFM［C］∥Santa Barbara, CA USA:2008 Lithography Asia, SPIE, 2008:113-121.

[6] [6] FOUCHER J, FILIPPOV P, PENZKOFER C, et al.Manufacturing and advanced characterization of sub-25nm diameter CD-AFM probes with sub-10nm tip edges radius［C］∥Munich, German: Metrology, Inspection, and Process Control for Microlithography XXVII, SPIE, 2013:449-454.

[7] [7] CHOI J, PARK B C, AHN S J, et al.Evaluation of carbon nanotube probes in critical dimension atomic force microscopes［J］.Journal of Micro/Nanolithography, MEMS, and MOEMS, 2016, 15(3): 034005-034005.

[8] [8] KOLOMIYTSEV A, LISITSYN S, SMIRNOV V, et al.Application of focused ion beam for the fabrication of AFM probes［C］∥Taganrog, Russia: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2017:012007.

[9] [9] YAO N.Focused ion beam systems: basics and applications［M］.Princeton Materials Institute: Cambridge University Press, 2007

[10] [10] THIESLER J, TUTSCH R, FROMM K, et al.True 3D-AFM sensor for nanometrology［J］.Measurement Science and Technology, 2020, 31(7): 074012.

[11] [11] FOUCHER J, SCHMIDT S W, PENZKOFER C, et al.Overcoming silicon limitations: new 3D-AFM carbon tips with constantly high-resolution for sub-28nm node semiconductor requirements［C］∥Munich, Germany: Metrology, Inspection, and Process Control for Microlithography XXVI,SPIE, 2012:964-969.

[12] [12] DIXSON R.Tip-on-tip imaging and self-consistent calibration using critical dimension atomic force microscopy［J］.Journal of Micro/Nanolithography, MEMS, and MOEMS, 2017, 16(2): 024005-024005.

[13] [13] AGEEV O, BYKOV A V, KOLOMIITSEV A, et al.Study of modification methods of probes for critical-dimension atomic-force microscopy by the deposition of carbon nanotubes［J］.Semiconductors, 2015, 49: 1743-1748.

[14] [14] DIXSON R, ORJI N, MISUMI I, et al.Spatial dimensions in atomic force microscopy: instruments, effects, and measurements［J］.Ultramicroscopy, 2018, 194: 199-214.

[15] [15] THIESLER J, AHBE T, TUTSCH R, et al.True 3D nanometrology: 3D-probing with a cantilever-based sensor［J］.Sensors, 2021, 22(1): 314.

[17] [17] ZHANG R, WU S, LIU L, et al.Adaptive-angle scanning method for 3D measurement with atomic force microscopy［J］.Measurement Science and Technology, 2019, 30(9): 095005.