[1] Sun P F, Jiang Z Q. Analysis of the application of gas turbines in heat and power cogeneration projects[J]. Energy Research and Information, 29, 6-10(2013).

[2] Davim J P, Oliveira C, Cardoso A. Predicting the geometric form of clad in laser cladding by powder using multiple regression analysis (MRA)[J]. Materials & Design, 29, 554-557(2008).

[3] Wang P F, Yang K, Chen M Z et al. Simulation and experimental research on the GH3536 molten pool laser cladding on inclined substrate[J]. Chinese Journal of Lasers, 48, 1002121(2021).

[4] Liang W X, Yang Y, Jin K et al. Morphology prediction of coaxial powder feeding multichannel laser cladding layer based on response surface[J]. Laser＆Optoelectronics Progress, 59, 0114012(2022).

[5] Wang Y Y, Li J H, Shu L S et al. Multi-objective optimization of laser cladding parameters based on RSM and NSGA-Ⅱ algorithm[J]. Laser & Optoelectronics Progress, 59, 0714004(2022).

[6] Jiang S J, Liu W J, Nan L L. Laser cladding height prediction based on neural network[J]. Journal of Mechanical Engineering, 45, 269-274, 281(2009).

[7] Pang Y F, Fu G Y, Wang M Y et al. Parameter optimization of high deposition rate laser cladding based on the response surface method and genetic neural network model[J]. Chinese Journal of Lasers, 48, 0602112(2021).

[8] Huang X W, Xi J T, Lebrun J L et al. Influences of processing parameters on geometric characterizations of laser cladding forming 316L stainless steel[J]. Laser & Optoelectronics Progress, 48, 071404(2011).

[9] Zhu G X, Zhang A F, Li D C et al. Model of layer thickness of thin-walled parts in laser metal direct manufacturing[J]. Transactions of the China Welding Institution, 31, 57-60, 115(2010).

[10] Shi S H, Fu G Y, Wang A J et al. Technique for manufacturing inner-light powder-supplying by laser machining forming and inner-light powder-supplying spray head[P].

[11] Shi J J, Shi T, Shi S H et al. Process study and optimization of upward cladding by laser inside powder feeding[J]. Infrared and Laser Engineering, 48, 108-115(2019).

[12] Jiang W W. Research on the technology of coaxial wire feeding in three beam splitting and the forming of twisted thin-wall parts[D](2020).

[13] Liu L J, Jiang Y Q, Wang X P et al. Inverse solution of BP neural network for laser remelting parameters[J]. Journal of Harbin University of Science and Technology, 22, 112-116(2017).

[14] Kumar A, Paul C P, Pathak A K et al. A finer modeling approach for numerically predicting single track geometry in two dimensions during laser rapid manufacturing[J]. Optics & Laser Technology, 44, 555-565(2012).

[15] Lu B, Zhu G X, Wu J Z et al. Laser direct forming process of thin-walled blade using variable spot by inside-beam powder feeding[J]. Chinese Journal of Lasers, 42, 1203003(2015).

[16] Wu J Z, Zhu G X, Lu B et al. Influence of self-regulation-effect on forming quality of thin-walled parts with variable laser spot cladding[J]. Journal of Xi’an Jiaotong University, 50, 145-150(2016).

[17] Zhou Z H[M]. Machine learning(2016).

[18] Wen H J, Meng X L, Xu X C et al. Multi-objective optimization of laser cladding process parameters based on neural network and genetic algorithm[J]. Applied Laser, 39, 734-740(2019).