[1] PARESH R V. VII-63[M]. Guidebook for Radiography(2024).

[2] WANG B, HUA X F, ZHONG H et al. The effect of computed radiographic resolution on image quality[J]. Electric Power, 49, 149-153(2016).

     王彬, 华雄飞, 钟华. 计算机射线照相（CR）分辨率对图像质量的影响[J]. 中国电力, 49, 149-153(2016).

[3] LIU X M, HAN ZH ZH, SHEN G Q et al. Panoramic design of detection parameter system for X-ray photography[J]. Nondestructive Testing Technologying, 41, 6-9， 55(2019).

     刘小明, 韩壮壮, 申国庆. X射线照相技术的检测参数系统全景设计[J]. 无损检测, 41, 6-9， 55(2019).

[4] 倪培君, 王俊涛, 闫敏. 数字射线检测技术理论研究进展[J]. 机械工程学报, 53, 13-18(2017).

     NI P J, WANG J T, YAN M et al. Research progress on digital radiography theory[J]. Journal of Mechanical Engineering, 53, 13-18(2017).

[5] LIN S S, KANG D, LI X H et al. Comparison between computed radiography testing and conventional radiography testing for typical defective components[J]. Nondestructive Testing Technologying, 43, 23-26， 57(2021).

     林珊珊, 康达, 李新华. 典型缺陷构件的计算机射线照相检测与常规射线检测对比[J]. 无损检测, 43, 23-26， 57(2021).

[6] SONG Q ZH, ZHAO Y, YU L L et al. Comparative experiment and research on high-energy X-ray digital radiography and low-energy X-ray film radiography[J]. Metal Working （Metal Cutting）, 2016, 441-444.

     宋全知, 赵扬, 于丽丽. 高能X射线数字化射线照相与低能X射线胶片照相对比试验与研究[J]. 金属加工（冷加工）, 441-444(2016).

[7] 郑世才. 双丝像质计介绍[J]. 无损探伤, 31, 32-34(2007).

     ZHENG SH C. Introduction of double-wire image quality meter[J]. Nondestructive Testing Technologying Technology, 31, 32-34(2007).

[8] 张继勋, 贾利群. 双丝型及平板孔型像质计在铸造铝合金车轮检测中的应用[J]. 铸造工程, 43, 29-30(2019).

     ZHANG J X, JIA L Q. Application of double wire and flat pass IQI image quality meter to detection of cast aluminum alloy wheel[J]. Foundry Engineering, 43, 29-30(2019).

[9] [standard](2019).

     [standard](2019).

[10] [standard], 5-2018.

     [standard](19232).

[11] [standard](2018).

     [standard](2018).

[12] ZHENG SH C. Standard specification for image quality ambiguity of digital radiography[J]. Nondestructive Testing Technologying Technology, 43, 33-35(2019).

     郑世才. 数字射线检测图像质量不清晰度的标准规定说明[J]. 无损探伤, 43, 33-35(2019).

[13] 郑世才. 基本空间分辨力测定多项式近似插入方法的分析[J]. 无损探伤, 42, 27-33(2018).

     ZHENG SH C. Analysis of approximate interpolation method of polynomial for determination of basic spatial resolution[J]. Nondestructive Testing Technologying Technology, 42, 27-33(2018).

[14] AKIMA H. A new method of interpolation and smooth curve fitting based on local procedures[J]. Journal of the ACM, 17, 589-602(1970).

[15] BICA A M. Optimizing at the end-points the Akima's interpolation method of smooth curve fitting[J]. Computer Aided Geometric Design, 31, 245-257(2014).

[16] PROBST G M, HOU Q H, BOECKMANS B et al. Characterization and stability monitoring of X-ray focal spots[J]. CIRP Annals, 69, 453-456(2020).

[17] 宋文龙, 李奉笑, 安康. 高能工业CT电子直线加速器焦点测量方法与装置研制[J]. 光学学报, 43, 341-348(2023).

     SONG W L, LI F X, AN K et al. Focal spot measurement method and device for high-energy industrial CT electron linear accelerator[J]. Acta Optica Sinica, 43, 341-348(2023).

[18] LI F X, ZHONG G W, YU H J et al. Measuring size and stability of focal spot for linear accelerator in industrial CT by slit translation scanning method[J]. IEEE Transactions on Instrumentation and Measurement, 73, 1-7(2024).

[19] SHI L X, BENNETT N R, WANG A S. Characterization of X-ray focal spots using a rotating edge[J]. Journal of Medical Imaging, 8(2021).