[1] Li A, Liu X F, Yu B et al. Key factors and developmental directions with regard to metal additive manufacturing[J]. Chinese Journal of Engineering, 41, 159-173(2019).

[2] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[3] Yang J X, Wu W L, Wang C L et al. Development status and typical application of selective laser melting technology applications in aerospace field[J]. Journal of Aeronautical Materials, 41, 1-15(2021).

[4] Li J F, Wei Z Y, Lu B H. Research progress on technology of selective laser melting of titanium and titanium alloys[J]. Laser & Optoelectronics Progress, 55, 011403(2018).

[5] Song X H, Li Y L, Meng X W et al. Study on process optimization and microstructure and mechanical properties of laser selective melting 304L stainless steel[J]. Hot Working Technology, 51, 17-21, 26(2022).

[6] Yan A R, Yang T T, Wang Y L et al. Thermal properties and mechanical properties of selective laser melting different layer thicknesses of Ni powder[J]. Chinese Journal of Lasers, 43, 0203004(2016).

[7] Wang L, Guo K, Cong J Q et al. Effect of process parameters on defect of SLMed 316L stainless steel[J]. Laser＆Optoelectronics Progress, 60, 0514007(2023).

[8] Yang L J, Li Y H, Zhu Y Y et al. Study on the influence of process parameters on the densification and surface hardness of TC4 titanium alloy formed parts by selective laser melting[J]. Applied Laser, 42, 55-62(2022).

[9] Sun T T, Yang Y Q, Su X B et al. Research of densification of 316L stainless steel powder in selective laser melting process[J]. Laser Technology, 34, 443-446(2010).

[10] Liang P H, Tang Q, Feng Q X et al. Numerical simulation and experiment of single track scanning and lapping in selective laser melting[J]. Journal of Mechanical Engineering, 56, 56-67(2020).

[11] Xiang Y, Zhang S Z, Li J F et al. Numerical simulation and experimental verification for selective laser single track melting forming of Ti6Al4V[J]. Journal of Zhejiang University (Engineering Science), 53, 2102-2109, 2117(2019).

[12] Li E L, Zhou Z Y, Wang L et al. Numerical studies of melt pool and gas bubble dynamics in laser powder bed fusion process[J]. Additive Manufacturing, 56, 102913(2022).

[13] Cao L. Numerical simulation of the impact of laying powder on selective laser melting single-pass formation[J]. International Journal of Heat and Mass Transfer, 141, 1036-1048(2019).

[14] Ao X H, Liu J H, Xia H X et al. A numerical study on the mesoscopic characteristics of Ti-6Al-4V by selective laser melting[J]. Materials, 15, 2850(2022).

[15] Ren Z H, Zhang Z W, Ma X Y et al. Laser irradiation behavior during balling effect in selective laser melting[J]. Chinese Journal of Lasers, 49, 1402203(2022).

[16] Cunningham R, Zhao C, Parab N et al. Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed X-ray imaging[J]. Science, 363, 849-852(2019).

[17] Zhao C, Parab N D, Li X X et al. Critical instability at moving keyhole tip generates porosity in laser melting[J]. Science, 370, 1080-1086(2020).

[18] Huang Y Z, Fleming T G, Clark S J et al. Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing[J]. Nature Communications, 13, 1170(2022).

[19] Khairallah S A, Martin A A, Lee J R I et al. Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing[J]. Science, 368, 660-665(2020).

[20] Yin J, Hao L, Yang L L et al. Investigation of interaction between vapor plume and spatter during selective laser melting additive manufacturing[J]. Chinese Journal of Lasers, 49, 1402202(2022).

[21] Ladani L, Romano J, Brindley W et al. Effective liquid conductivity for improved simulation of thermal transport in laser beam melting powder bed technology[J]. Additive Manufacturing, 14, 13-23(2017).

[22] Xie Y K. Numerical investigation on temperature field and flow field during selective laser melting of Ti-6Al-4V[D], 9-22(2018).