[3] XU Y, ZHANG W. Numerical modelling of oxidized microstructure and degraded properties of 2D C/SiC composites in air oxidizing environments below 800 ℃[J]. Materials Science and Engineering(2011).

[4] LACOMBE A, PICHON T, LACOSTE M. High temperature composite nozzle extensions: a mature and efficient technology to improve upper stage liquid rocket engine performance[conf-proc]. 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cincinnati.

[7] HALBIG M C, MCGUFFIN-CAWLEY J D, ECKEL A J et al. Oxidation kinetics and stress effects for the oxidation of continuous carbon fibers within a microcracked C/SiC ceramic matrix composite[J]. Journal of the American Ceramic Society(2008).

[9] CHEN X, SUN Z, CHEN P et al. Modeling thermal expansion behavior of 2.5D C/SiC composites in air oxidizing environments between 400 ℃ and 800 ℃[J]. Applied Composite Materials(2020).

[10] MEI H, TAN Y, CHANG P et al. Simplified approach to study oxidative damage of C/SiC composites induced from notch defects[J]. Ceramics International(2019).

[11] LAMOUROUX F, CAMUS G, THEBAULT J. Kinetics and mechanisms of oxidation of 2D woven C/SiC composites: I. experimental approach[J]. Journal of the American Ceramic Society, 8:, 2049(1994).

[12] LAMOUROUX F, NASLAIN R, JOUIN J. Kinetics and mechanisms of oxidation of 2D woven C/SiC composites: II, theoretical approach[J]. Journal of the American Ceramic Society, 8:, 2058(1994).

[13] SULLIVAN R M. A model for the oxidation of carbon silicon carbide composite structures[J]. Carbon(2005).

[14] ZHAO C, TU Z, MAO J. The dynamic thermophysical properties evolution and multi-scale heat transport mechanisms of 2.5D C/SiC composite under high-temperature air oxidation environment[J]. Composites Part B(2023).

[15] DING J, SUN Z, CHEN X et al. A progressive oxidative damage model of C/SiC composites under stressed oxidation environments[J]. Applied Composite Materials(2021).

[17] CHEN P, NIU X, CHEN X et al. Modeling the failure time and residual strength of C/SiC composites under stress-oxidation environment[J]. Transactions of the Indian Ceramic Society(2020).

[18] ZHAO C, TU Z, MAO J. Thermal-oxidation coupled analysis method for unidirectional fiber-reinforced C/SiC composites in air oxidizing environments below 1000 ℃[J]. International Communications in Heat and Mass Transfer(2023).

[19] ECKEL A J, CAWLEY J D, PARTHASARATHY T A. Oxidation kinetics of a continuous carbon phase in a nonreactive matrix[J]. Journal of the American Ceramic Society(1995).

[20] OPILA E J, SERRA J L. Oxidation of carbon fiber-reinforced silicon carbide matrix composites at reduced oxygen partial pressures[J]. Journal of the American Ceramic Society, 7:, 2185(2011).

[21] XIANG Y, CAO F, PENG Z et al. Evolution of microstructure and mechanical properties of PIP-C/SiC composites after high- temperature oxidation[J]. Journal of Asian Ceramic Societies(2017).

[22] SU F, HUANG P, WU J et al. Creep behavior of C/SiC composite in hot oxidizing atmosphere and its mechanism[J]. Ceramics International(2017).

[23] DRAWIN S, BACOS M, DORVAUX J et al. Oxidation model for carbon-carbon composites[conf-proc]. 4th Symposium on Multidisciplinary Analysis and Optimization, Cleveland.

[25] DEAL B E, GROVE A S. General relationship for the thermal oxidation of silicon[J]. Journal of Applied Physics(1965).

[26] FILIPUZZI L, NASLAIN R, JAUSSAUD C. Oxidation kinetics of SiC deposited from CH₃SiCl₃/H₂ under CVI conditions[J]. Journal of Materials Science(1992).

[27] SONG Y, DHAR S, FELDMAN L C. Modified deal grove model for the thermal oxidation of silicon carbide[J]. Journal of Applied Physics(2004).

[28] FULLER E N, SCHETTLER P D, GIDDINGS J C. New method for prediction of binary gas-phase diffusion coefficients[J]. Industrial & Engineering Chemistry(1966).

[29] KNUDSEN M. The laws of molecular flow and of inner friction flow of gases through tubes[J]. Journal of Membrane Science(1995).