[1] Ping X L, Fu H G, Sun S T et al. Progress in preparation of hard phase reinforced Ni-based alloy composite coating by laser cladding[J]. Materials Reports, 33, 1535-1540(2019).

[2] Hao F, Xin S W, Mao Y C et al. Review on application of titanium alloy in armor[J]. Materials Reports, 34, 293-296,327(2020).

[3] Zhang J H, Li X X, Xu D S et al. Recent progress in the simulation of microstructure evolution in titanium alloys[J]. Progress in Natural Science: Materials International, 29, 295-304(2019).

[4] Gangwar K, Ramulu M. Friction stir welding of titanium alloys: a review[J]. Materials & Design, 141, 230-255(2018).

[5] Sarma J, Kumar R, Sahoo A K et al. Enhancement of material properties of titanium alloys through heat treatment process: a brief review[J]. Materials Today: Proceedings, 23, 561-564(2020). http://www.sciencedirect.com/science/article/pii/s2214785319313768

[6] Vlcak P, Fojt J, Weiss Z et al. The effect of nitrogen saturation on the corrosion behaviour of Ti-35Nb-7Zr-5Ta beta titanium alloy nitrided by ion implantation[J]. Surface and Coatings Technology, 358, 144-152(2019).

[7] An Q L, Chen J, Tao Z R et al. Experimental investigation on tool wear characteristics of PVD and CVD coatings during face milling of Ti-6242S and Ti-555 titanium alloys[J]. International Journal of Refractory Metals and Hard Materials, 86, 105091(2020). http://www.sciencedirect.com/science/article/pii/S0263436819304986

[8] Haron C H C, Ginting A, Arshad H et al. Performance of alloyed uncoated and CVD-coated carbide tools in dry milling of titanium alloy Ti-6242S[J]. Journal of Materials Processing Technology, 185, 77-82(2007).

[9] Wang Y, Yu H J, Chen C Z et al. Review of the biocompatibility of micro-arc oxidation coated titanium alloys[J]. Materials & Design, 85, 640-652(2015). http://www.sciencedirect.com/science/article/pii/S0264127515301611

[10] Wang D G, Chen C Z, Jin Q P et al. HA/Bioglass composite films deposited by pulsed laser with different substrate temperature[J]. Applied Physics A, 114, 897-902(2014). http://link.springer.com/article/10.1007/s00339-013-7736-x

[11] Ganesh P, Sundar R, Kumar H et al. Studies on fatigue life enhancement of pre-fatigued spring steel specimens using laser shock peening[J]. Materials & Design, 54, 734-741(2014). http://www.sciencedirect.com/science/article/pii/S0261306913008480

[12] Balla V K, Soderlind J, Bose S et al. Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy[J]. Journal of the Mechanical Behavior of Biomedical Materials, 32, 335-344(2014). http://smartsearch.nstl.gov.cn/paper_detail.html?id=8f258ff63a595bdd0f76380168e29548

[13] Guo C, Zhou J S, Zhao J R et al. Microstructure and friction and wear behavior of laser boronizing composite coatings on titanium substrate[J]. Applied Surface Science, 257, 4398-4405(2011). http://www.sciencedirect.com/science/article/pii/S016943321001799X

[14] Kooi B J, Pei Y T, de Hosson J T M et al. The evolution of microstructure in a laser clad TiB-Ti composite coating[J]. Acta Materialia, 51, 831-845(2003).

[15] Liu Y N, Sun R L, Zhang T G et al. Microstructures and properties of laser cladding coating on Ti811 alloy surface[J]. Surface Technology, 48, 123-132(2019).

[16] Qiu Y, Zhang F Y, Hu T T et al. Effect of laser power on microstructure and hardness of Ti40 flame-retardant titanium alloy deposited by laser cladding on TC4 surface[J]. Chinese Journal of Lasers, 46, 1102011(2019).

[17] Zhang T G, Zhuang H F, Xiao H Q et al. Effect of rare earth on microstructure and friction and wear properties of Ti-based laser cladding layer[J]. Chinese Journal of Lasers, 46, 0903001(2019).

[18] Lü Y H, Li J, Tao Y F et al. Oxidation behaviors of the TiNi/Ti2Ni matrix composite coatings with different contents of TaC addition fabricated on Ti6Al4V by laser cladding[J]. Journal of Alloys and Compounds, 679, 202-212(2016). http://smartsearch.nstl.gov.cn/paper_detail.html?id=937d23c3b012df8cca697e5c955a9663

[19] Liu Y N, Sun R L, Niu W et al. Microstructure and friction and wear resistance of laser cladding composite coating on Ti811 surface[J]. Chinese Journal of Lasers, 46, 0102010(2019).

[20] Sun R L, Lei Y W. Microstructure and hardness of laser clad SiCp-Al composite coatings on Al alloys[J]. Materials Letters, 62, 3272-3275(2008). http://www.sciencedirect.com/science/article/pii/S0167577X08002267

[21] Lei Y W, Sun R L, Tang Y et al. Numerical simulation of temperature distribution and TiC growth kinetics for high power laser clad TiC/NiCrBSiC composite coatings[J]. Optics & Laser Technology, 44, 1141-1147(2012). http://www.sciencedirect.com/science/article/pii/S0030399211002969

[22] Lei Y W, Sun R L, Tang Y et al. Microstructure and phase transformations in laser clad CrxSy/Ni coating on H13 steel[J]. Optics and Lasers in Engineering, 66, 181-186(2015). http://www.sciencedirect.com/science/article/pii/S0143816614002255

[23] Gao Y L, Wang C S, Yao M et al. The resistance to wear and corrosion of laser-cladding Al2O3 ceramic coating on Mg alloy[J]. Applied Surface Science, 253, 5306-5311(2007). http://www.sciencedirect.com/science/article/pii/S0169433206015248

[24] Xu B S, Fang J X, Dong S Y et al. Heat-affected zone microstructure evolution and its effects on mechanical properties for laser cladding FV520B stainless steel[J]. Acta Metallurgica Sinica, 52, 1-9(2016).

[25] Farahmand P, Liu S, Zhang Z et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International, 40, 15421-15438(2014). http://www.sciencedirect.com/science/article/pii/S0272884214009924

[26] Dong S Y, Yan X L, Xu B S et al. Influence of microstructure and residual stress on surface stress measurement of laser cladding layer by Rayleigh wave[J]. Journal of Mechanical Engineering, 51, 50-56(2015).

[27] Liu Y N, Yang L J, Yang X J et al. Optimization of microstructure and properties of composite coatings by laser cladding on titanium alloy[J]. Ceramics International, 47, 2230-2243(2021). http://www.sciencedirect.com/science/article/pii/S0272884220327590

[28] Liu Y N, Sun R L, Niu W et al. Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings[J]. Optics and Lasers in Engineering, 120, 84-94(2019). http://www.sciencedirect.com/science/article/pii/S014381661831529X

[29] Feng Y Q, Feng K, Yao C W et al. Effect of LaB6 addition on the microstructure and properties of (Ti3Al + TiB)/Ti composites by laser cladding[J]. Materials & Design, 181, 107959(2019). http://www.sciencedirect.com/science/article/pii/S0264127519303971

[30] Zhang T G, Zhuang H F, Zhang Q et al. Influence of Y2O3 on the microstructure and tribological properties of Ti-based wear-resistant laser-clad layers on TC4 alloy[J]. Ceramics International, 46, 13711-13723(2020). http://www.sciencedirect.com/science/article/pii/S0272884220304843

[31] Barin I, Sauert F, Rhonhof S E et al. Thermochemical data of pure substances[M]. 3rd ed(1995).

[32] Massalski T B, Okamoto H, Subramanian P R et al. Binary alloy phase diagrams[M]. 2nd ed(1986).

[33] Wang P, Li J, Lin C Z et al. First-principles calculations of electronic structure and mechanical properties of Ti-Ni intermetallic compounds[J]. The Chinese Journal of Nonferrous Metals, 26, 2546-2554(2016).