Researching | Study on Parameters Inversion and Groove Depth Accuracy Control in Laser Machining of Hydrodynamic Grooves of Mechanical Seal

Chinese Journal of Lasers, Volume. 51, Issue 16, 1602407(2024)

Study on Parameters Inversion and Groove Depth Accuracy Control in Laser Machining of Hydrodynamic Grooves of Mechanical Seal

Shuo Chen, Xiaolei Liu, Qiangguo Deng, Xuejian Sun, Hengjie Xu, and Wenyuan Mao^*

Author Affiliations

Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming 650500, Yunnan , China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (11)

References (25)

Paper Information

References(25)

[1] Shi L P, Wei W, Wang T et al. Experimental investigation of the effect of typical surface texture patterns on mechanical seal performance[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 227(2020).

[2] Li Z T, Hao M M, Sun X H et al. Experimental study of cavitation characteristic of single-row reverse spiral groove liquid-film seals[J]. Tribology International, 141, 105782(2020).

[3] Xu L S, Wang Y L, Zhang F et al. Transient characteristics of mechanical seals with different surface structures under disturbance conditions[J]. Journal of Xi’an Jiaotong University, 54, 56-63(2020).

[4] Liu F Y, Li Y F, Yu B et al. Experimental research on sealing performance of liquid film seal with herringbone-grooved composite textures[J]. Tribology International, 178, 108005(2023).

[5] Shi L P, Zhang Y C, Chen S et al. Comparative research on gas seal performance textured with microgrooves and microdimples[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, 280(2019).

[6] Chen T Y, Ji J H, Fu Y H et al. Tribological performance of UV picosecond laser multi-scale composite textures for C/SiC mechanical seals: theoretical analysis and experimental verification[J]. Ceramics International, 47, 23162-23180(2021).

[7] Ma X Z, Meng X K, Wang Y M et al. Suction effect of cavitation in the reverse-spiral-grooved mechanical face seals[J]. Tribology International, 132, 142-153(2019).

[8] Jia Q, Wang J L, Cui Z et al. Performance analysis and optimization of mechanical seal with spiral groove manufacturing error[J]. Journal of Xi’an Jiaotong University, 54, 46-55(2020).

[9] Gilbert D, Stoesslein M, Axinte D et al. A time based method for predicting the workpiece surface micro-topography under pulsed laser ablation[J]. Journal of Materials Processing Technology, 214, 3077-3088(2014).

[10] Wang Y, Zhang M Y, Dong Y H et al. Morphology modelling and validation in nanosecond pulsed laser ablation of metallic materials[J]. Precision Engineering, 79, 34-42(2023).

[11] Mao W Y, Liu X L, Chen S et al. Groove depth calculation and experimental verification in nanosecond laser machining of hydrodynamic grooves of mechanical seal[J]. Chinese Journal of Lasers, 50, 1202404(2023).

[12] Zhang R, Huang C Z, Wang J et al. Experimental investigation and optimization of femtosecond laser processing parameters of silicon carbide-based on response surface methodology[J]. Ceramics International, 48, 14507-14517(2022).

[13] Marques A, Cunha A, Faria S et al. Predictive models on the influence of laser texturing parameters on the Inconel 718 surface by using Nd∶YVO4 laser[J]. Optics & Laser Technology, 154, 108320(2022).

[14] Genna S, Menna E, Rubino G et al. Laser machining of silicon carbide: experimental analysis and multiobjective optimization[J]. Ceramics International, 49, 10682-10691(2023).

[15] Kumar K K, Samuel G L, Shunmugam M S. Theoretical and experimental investigations of ultra-short pulse laser interaction on Ti6Al4V alloy[J]. Journal of Materials Processing Technology, 263, 266-275(2019).

[16] Wang X S, Huang Y K, Li C Y et al. Numerical simulation and experimental study on picosecond laser ablation of stainless steel[J]. Optics & Laser Technology, 127, 106150(2020).

[17] Ma J W, He G Z, Jia Z Y et al. Solution of maximum laser ablation depth based on dynamic energy distribution model[J]. Materials and Manufacturing Processes, 34, 1719-1725(2019).

[18] Zhang J, Zhang S, Chen G Y et al. Laser micro-texture formation mechanism based on modified heat-mass transfers and hydrodynamic models[J]. International Journal of Mechanical Sciences, 230, 107528(2022).

[19] Wang Y F, Yu Z, Li K M et al. Numerical simulation of micro-pit morphology of titanium alloy ablated by nanosecond laser[J]. Chinese Journal of Lasers, 49, 0802008(2022).

[20] Wang Y F[M]. Computational methods for inverse problems and their applications, 3-4(2007).

[21] Feng Y X, Lu Y T, Lin Y F et al. Inverse analysis of the cutting force in laser-assisted milling on Inconel 718[J]. The International Journal of Advanced Manufacturing Technology, 96, 905-914(2018).

[22] Cordovilla F, García-Beltrán A, Montealegre M A et al. Development of model-based laser irradiation customization strategies for optimized material phase transformations in the laser hardening of Cr-Mo steels[J]. Materials & Design, 199, 109411(2021).

[23] Sun X T, Zeng K, He X C et al. Inversion model of maximum riveting force in aluminum alloy self-piercing riveting processes[J]. China Mechanical Engineering, 32, 1341-1345, 1353(2021).

[24] Mao W Y, Song P Y, Deng Q G et al. Optimization of laser processing technology for dry gas seal spiral groove based on ACE method[J]. Advanced Engineering Sciences, 53, 195-202(2021).

[25] Mao W Y, Song P Y, Deng Q G et al. Research on laser processing technology of spiral groove for dry gas seal[J]. Advanced Engineering Sciences, 50, 253-262(2018).

Tools

Get Citation

Copy Citation Text

Shuo Chen, Xiaolei Liu, Qiangguo Deng, Xuejian Sun, Hengjie Xu, Wenyuan Mao. Study on Parameters Inversion and Groove Depth Accuracy Control in Laser Machining of Hydrodynamic Grooves of Mechanical Seal[J]. Chinese Journal of Lasers, 2024, 51(16): 1602407

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Micro-Nano Manufacturing

Received: Oct. 20, 2023

Accepted: Dec. 5, 2023

Published Online: Jul. 29, 2024

The Author Email: Mao Wenyuan (maowenyuanyn@qq.com)

DOI:10.3788/CJL231311

CSTR:32183.14.CJL231311

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology