[1] Kong L Q, Chen H W. Analysis of repair and maintenance strategy of petroleum transportation pipeline[J]. China Petroleum and Chemical Standard and Quality, 33, 41(2013).

[2] Liu J P, Wang J, Mazzola L et al. Development and evaluation of poly (dimethylsiloxane) based composite coatings for icephobic applications[J]. Surface and Coatings Technology, 349, 980-985(2018).

[3] Zhang F D, Liu H, Suebka C et al. Corrosion behaviour of laser-cleaned AA7024 aluminium alloy[J]. Applied Surface Science, 435, 452-461(2018).

[4] Jiang S W, Chen W, Liu G Y et al. Research on sand blasting and derusting technology of steel bridge deck[J]. Theoretical Research in Urban Construction, 26, 103-105(2017).

[5] Mei F Q. Discussion of forecast of super high pressure jet derusting in vessel cleaning[J]. Chemical Cleaning, 11, 29-36(1995).

[6] Liu Y J, Liu J H. Status and prospects of laser cleaning technology[J]. Aviation Precision Manufacturing Technology, 46, 60-62(2010).

[7] Lei Z L, Tian Z, Chen Y B. Laser cleaning technology in industrial fields[J]. Laser & Optoelectronics Progress, 55, 030005(2018).

[8] Peng W, Lei H. Effect of energy density on surface morphology and properties of H13 mold steel via picosecond laser cleaning[J]. Laser & Optoelectronics Progress, 58, 1714002(2021).

[9] Tong Y Q[D]. Study on mechanism and application fundamentals of laser removal of metal oxides, 47-51(2014).

[10] Li X Y, Li C Y, Wang D et al. Effect of laser scanning speeds on cleaning quality of rusted layer on Q345 steel surface[J]. Chinese Journal of Lasers, 47, 1002010(2020).

[11] Tong Y, Qiu T W, Yi J L et al. Effect of pulse frequency on laser cleaning mechanism of paint coating[J]. Laser & Optoelectronics Progress, 58, 1914009(2021).

[12] Zhou J Z, Li H T, Sun Q et al. Laser derusting mechanism of AH32 steel based on cleaned surface topography[J]. Optics and Precision Engineering, 27, 1754-1764(2019).

[13] Gao K, Zeng Q S, Zhang Z Y et al. Adhesion of residual primer paint after laser cleaning aircraft aluminum alloy skin[J]. Laser & Optoelectronics Progress, 58, 0914006(2021).

[14] Zhu L X, Sun B T, Li Z et al. The weld quality improvement via laser cleaning pre-treatment for laser butt welding of the HSLA steel plates[J]. Welding in the World, 64, 1715-1723(2020).

[15] Gao L Y, Zhou J Z, Sun Q et al. Numerical simulation and surface morphology of laser-cleaned aluminum alloy paint layer[J]. Chinese Journal of Lasers, 46, 0502002(2019).

[16] Lei Z L, Sun H R, Tian Z et al. Effect of laser at different time scales on cleaning quality of paint on Al alloy surfaces[J]. Chinese Journal of Lasers, 48, 0602103(2021).

[17] Zhang G X, Hua X M, Huang Y et al. Investigation on mechanism of oxide removal and plasma behavior during laser cleaning on aluminum alloy[J]. Applied Surface Science, 506, 144666(2020).

[18] Zhu M, Zhou J Z, Meng X K et al. Optimization of laser cleaning process parameters for Q345C steel rust layer based on response surface[J]. Surface Technology, 48, 381-391(2019).

[19] Zhao H C, Qiao Y L, Du X et al. Research on paint removal technology for aluminum alloy using pulsed laser[J]. Chinese Journal of Lasers, 48, 0602121(2021).

[20] Zhu M[D]. Study on cleaning technology and surface quality of Q345C steel rust layer by nanosecond laser, 55-67(2020).

[21] Li L, Zhang S, He Q et al. Application of response surface methodology inexperiment design and optimization[J]. Research and Exploration in Laboratory, 34, 41-45(2015).

[22] Zhang X, Pan C, Han X et al. Optimal design of tuned mass damper based on adaptive weighted particle swarm optimization algorithm[J]. Journal of Yantai University (Natural Science and Engineering Edition), 34, 472-478(2021).

[23] Wang S L, Liu G Y. A nonlinear dynamic adaptive inertial weightparticle swarm optimization[J]. Computer Simulation, 38, 249-253, 451(2021).