[1] [1] Gao S, Wang H X, Huang H and Kang R K 2023 Molecular simulation of the plastic deformation and crack formation in single grit grinding of 4H-SiC single crystalInt. J. Mech. Sci.247108147

[2] [2] Lychev S, Digilov A, Demin G, Gusev E, Kushnarev I, Djuzhev N and Bespalov V 2024 Deformations of single-crystal silicon circular plate: theory and experimentSymmetry16137

[3] [3] Radhakrishnan G, Kim K, Droopad R and Goyal A 2024 Heteroepitaxial GaAs thin-films on flexible, large-area, single-crystal-like substrates for wide-ranging optoelectronic applicationsSci. Rep.1410116

[4] [4] Chen H Yet al2024 Study on the affecting factors of material removal mechanism and damage behavior of shear rheological polishing of single crystal silicon carbideJ. Manuf. Process.112225–37

[5] [5] Zhang L J 2023 Research progress and challenges of chemical mechanical polishing for silicon carbide waferProc. of the China Semiconductor Technology Int. Conf. (CSTIC)(IEEE)

[6] [6] Shen Y, Wang H X, Guo X G and Gao S 2024 Environment-friendly chemical mechanical polishing using NaHCO3-activated H2O2 slurry for highly efficient finishing of 4H-SiC (0001) surfaceJ. Manuf. Process.109213–21

[7] [7] Tao H F, Liu Y H, Zhao D W and Lu X C 2023 Prediction and measurement for grinding force in wafer self-rotational grindingInt. J. Mech. Sci.258108530

[8] [8] Lawn B R, Huang H, Lu M Y, Borrero-Lpez and Zhang Y 2022 Threshold damage mechanisms in brittle solids and their impact on advanced technologiesActa Mater.232117921

[9] [9] Li X L, Fan Z Q, Huang S Q, Lu M Y and Huang H 2023 Brittle-to-ductile transition in nanoscratching of silicon and gallium arsenide using berkovich and conical tipsAppl. Surf. Sci.637157934

[10] [10] Yang X, Kang R K, Gao S, Wu Z H and Zhu X L 2022 Subsurface damage pattern and formation mechanism of monocrystalline -Ga2O3 in grinding processFront. Mech. Eng.1721

[11] [11] Gao S, Kang R K, Dong Z G and Zhang B 2013 Edge chipping of silicon wafers in diamond grindingInt. J. Mach. Tools Manuf.6431–37

[12] [12] Yang D Y, Zhang Z Y, Wei F R, Li S P, Liu M and Lu Y W 2024 Comprehensive review on research status and progress in precision grinding and machining of BK7 glassesMicromachines151021

[13] [13] Wang S, Wang S, Wang S and Zhao Q L 2024 Study on subsurface damage behavior in ductile ultra-precision grinding of sapphire based on acoustic emission signal processingJ. Manuf. Process.109326–44

[14] [14] Qu M N, Huang C Z, Huang S Q, Peng X B, Wang Z, Xu L H, Xu Z K, Zhang D J and Guo B S 2024 Brittle-ductile transition mechanism during grinding 4H-SiC wafer considering laminated structureInt. J. Mech. Sci.283109685

[15] [15] Wang S, Sun G Y, Zhao Q L and Yang X D 2023 Monitoring of ductile–brittle transition mechanisms in sapphire ultra-precision grinding used small grit size grinding wheel through force and acoustic emission signalsMeasurement210112557

[16] [16] Lawn B R, Borrero-Lopez O, Huang H and Zhang Y 2021 Micromechanics of machining and wear in hard and brittle materialsJ. Am. Ceram. Soc.1045–22

[17] [17] Wang W T, Lu X S, Wu X K, Zhang Y Q, Wang R, Yang D R and Pi X D 2023 Chemical–mechanical polishing of 4H silicon carbide wafersAdv. Mater. Interfaces102202369

[18] [18] Cui X X, Zhang Z Y, Yu S Q, Chen X, Shi C J, Zhou H X, Meng F N, Yu J X and Wen W 2023 Unprecedented atomic surface of silicon induced by environmentally friendly chemical mechanical polishingNanoscale159304–14

[19] [19] Wang C L, Zhang J C, Xu S R, Zhang C F, Feng Q, Zhang Y C, Ning J, Zhao S L, Zhou H and Hao Y 2021 Progress in state-of-the-art technologies of Ga2O3 devicesJ. Phys. D: Appl. Phys.54243001

[20] [20] Li C, Wang K C, Piao Y, Cui H L, Zakharov O, Duan Z Y, Zhang F H, Yan Y D and Geng Y Q 2024 Surface micro-morphology model involved in grinding of GaN crystals driven by strain-rate and abrasive coupling effectsInt. J. Mach. Tools Manuf.201104197

[21] [21] Lu W T, Zhou L B, Shimizu J, Onuki T, Ojima H and Yamamoto T 2020 Material removal mechanism in rotary in-feed grinding—modeling and analysisJ. Adv. Mech. Des. Syst. Manuf.14JAMDSM0095

[22] [22] Hecker R L and Liang S Y 2003 Predictive modeling of surface roughness in grindingInt. J. Mach. Tool Manuf.43755–61

[23] [23] Hecker R L, Liang S Y, Wu X J, Xia P and Jin D G W 2007 Grinding force and power modeling based on chip thickness analysisInt. J. Adv. Manuf. Technol.33449–59

[24] [24] Wu C J, Li B Z, Liu Y and Liang S Y 2017 Surface roughness modeling for grinding of silicon carbide ceramics considering co-existence of brittleness and ductilityInt. J. Mech. Sci.133167–77

[25] [25] Chai P, Li S J, Li Y and Yin X C 2020 Study on damage of 4H-SiC single crystal through indentation and scratch testing in micro-nano scalesAppl. Sci.105944

[26] [26] Lawn B R and Fuller E R 1975 Equilibrium penny-like cracks in indentation fractureJ. Mater. Sci.102016–24

[27] [27] Lawn B R, Evans A G and Marshall D B 1980 Elastic/plastic indentation damage in ceramics: the median/radial crack systemJ. Am. Ceram. Soc.63574–81

[28] [28] Marshall D B, Lawn B R and Evans A G 1982 Elastic/plastic indentation damage in ceramics: the lateral crack systemJ. Am. Ceram. Soc.65561–6

[29] [29] Lambropoulos J C, Jacobs S D and Ruckman J 1999 Material removal mechanisms from grinding to polishingProc. of the Finishing of Advanced Ceramics and Glasses(TIB) pp 113–28

[30] [30] Yin J F, Bai Q, Goel S, Zhou P and Zhang B 2021 An analytical model to predict the depth of sub-surface damage for grinding of brittle materialsCIRP J. Manuf. Sci. Technol.33454–64

[31] [31] Li C, Zhang F H, Wu Y Q and Zhang X 2018 Influence of strain rate effect on material removal and deformation mechanism based on ductile nanoscratch tests of Lu2O3 single crystalCeram. Int.4421486–98

[32] [32] Li S Y, Wang Z and Wu Y L 2008 Relationship between subsurface damage and surface roughness of optical materials in grinding and lapping processesJ. Mater. Process. Technol.20534–41

[33] [33] Zhong Y Y, Xu M J, Kuang W J, Wan F B, Lin Z F, Fan Y S, Hu Q Q and Xu F F 2024 Research on subsurface damage measurement of fused silica in ultra-precision grinding based on laser damage performanceAppl. Sci.145379

[34] [34] Li H N, Yu T B, Zhu L D and Wang W S 2016 Evaluation of grinding-induced subsurface damage in optical glass BK7J. Mater. Process. Technol.229785–94

[35] [35] Wang K Y, Gao Y F and Yang C F 2024 Prediction of subsurface microcrack damage depth based on surface roughness in diamond wire sawing of monocrystalline siliconMaterials17553

[36] [36] Zhou H, Jiang W, Ji J, Ren X P, Zhu Z Y and Zhang C W 2022 Prediction and experimental investigation of depth of subsurface damage in semi-consolidated abrasive grinding of cleavable gallium oxide crystalsInt. J. Adv. Manuf. Technol.119855–64

[37] [37] Zhang W J, Gong Y D, Xu Y C and Zhao J B 2024 Experimental research on material removal in robot abrasive belt grindingMater. Manuf. Process.39123–9

[38] [38] Chen Y, Jiang C, Chen X, Huang G Q and Hu Z W 2023 Study on the dynamic influence of the distribution of cutting depth on the ground surface quality in a precision grinding processJ. Manuf. Process.107134–43

[39] [39] Xin Y K, Lu J, Li C, Luo Q F, Li Z S, Ke C M and Xu X P 2024 Effects of processing parameters and grinding direction on the material removal mechanism of (100) surface single crystal diamond in self-rotating mechanical grindingDiam. Relat. Mater.141110685

[40] [40] Sun J L, Qin F, Chen P and An T 2016 A predictive model of grinding force in silicon wafer self-rotating grindingInt. J. Mach. Tools Manuf.10974–86

[41] [41] Zhang L X, Chen P, An T, Dai Y W and Qin F 2019 Analytical prediction for depth of subsurface damage in silicon wafer due to self-rotating grinding processCurr. Appl. Phys.19570–81

[42] [42] Lin B, Zhou P, Wang Z G, Yan Y, Kang R K and Guo D M 2018 Analytical elastic-plastic cutting model for predicting grain depth-of-cut in ultrafine grinding of silicon waferJ. Manuf. Sci. Eng.140121001

[43] [43] Yan L, Rong Y M, Jiang F and Zhou Z X 2011 Three-dimension surface characterization of grinding wheel using white light interferometerInt. J. Adv. Manuf. Technol.55133–41

[44] [44] Zhang Y, Kang R K, Gao S, Huang J X and Zhu X L 2021 A new model of grit cutting depth in wafer rotational grinding considering the effect of the grinding wheel, workpiece characteristics, and grinding parametersPrecis. Eng.72461–8

[45] [45] Marshall D B, Lawn B R and Chantikul P 1979 Residual stress effects in sharp contact crackingJ. Mater. Sci.142225–35

[46] [46] Long R, Hall M S, Wu M and Hui C Y 2011 Effects of gel thickness on microscopic indentation measurements of gel modulusBiophys. J.101643–50

[47] [47] Sharp K W, Miller M H and Scattergood R O 2000 Analysis of the grain depth-of-cut in plunge grindingPrecis. Eng.24220–30

[48] [48] Holtermann R, Schumann S, Menzel A and Biermann D 2013 Modelling, simulation and experimental investigation of chip formation in internal traverse grindingProd. Eng.7251–63

[49] [49] Zhu C M, Gu P, Wu Y Y, Liu D H and Wang X K 2019 Surface roughness prediction model of SiCp/Al composite in grindingInt. J. Mech. Sci.15598–109

[50] [50] Wang S, Wang S and Zhao Q L 2024 Subsurface damage in sapphire ultra-precision grindingJ. Manuf. Process.129215–37

[51] [51] Wang Y, Bai T Q, Shu L, Su J H and Xu K W 2024 Analytical prediction of subsurface damage depth of monocrystalline silicon in ultrasonic vibration assisted wire sawingInt. J. Adv. Manuf. Technol.1332445–60

[52] [52] Oliver W C and Pharr G M 1992 An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJ. Mater. Res.71564–83

[53] [53] Oliver W C and Pharr G M 2004 Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodologyJ. Mater. Res.193–20

[54] [54] Wang Y Q, Li X L, Wu Y Q, Mu D K and Huang H 2021 The removal mechanism and force modelling of gallium oxide single crystal in single grit grinding and nanoscratchingInt. J. Mech. Sci.204106562

[55] [55] Wu Y Q, Huang H and Zou J 2012 Lattice bending in monocrystalline GaAs induced by nanoscratchingMater. Lett.80187–90

[56] [56] Tan S P, Wang Y P, Huang H, Wu Y Q and Huang H 2022 Deformation and removal mechanism of single crystal gallium nitride in nanoscratchingCeram. Int.4823793–9

[57] [57] Wang W, Yao P, Wang J, Huang C Z, Kuriyagawa T, Zhu H T, Zou B and Liu H 2017 Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratchingCeram. Int.4310726–36

[58] [58] Jiang Q Q, Zhang L and Yang C F 2021 An analytical model for estimation of the stress field and cracks caused by scratching anisotropic single crystal gallium nitrideMater. Sci. Semicond. Process.122105446

[59] [59] Yao L X, Zhang L, Ge P Q, Gao Y F and Wang H 2020 Study on nucleation and propagation of median cracks generated by scratching single crystal siliconMater. Sci. Semicond. Process.105104691

[60] [60] Wang P Z, Ge P Q, Bi W B, Liu T Y and Gao Y F 2018 Stress analysis in scratching of anisotropic single-crystal silicon carbideInt. J. Mech. Sci.1411–8

[61] [61] Jing X N, Maiti S and Subhash G 2007 A new analytical model for estimation of scratch-induced damage in brittle solidsJ. Am. Ceram. Soc.90885–92

[62] [62] Ahn Y, Farris T N and Chandrasekar S 1998 Sliding microindentation fracture of brittle materials: role of elastic stress fieldsMech. Mater.29143–52

[63] [63] Yoffe E H 1982 Elastic stress fields caused by indenting brittle materialsPhil. Mag.A46617–28

[64] [64] Zhu H T, Huang C Z, Wang J, Li Q L and Che C L 2009 Experimental study on abrasive waterjet polishing for hard–brittle materialsInt. J. Mach. Tools Manuf.49569–78

[65] [65] Axinte D, Huang H, Yan J W and Liao Z R 2022 What micro-mechanical testing can reveal about machining processesInt. J. Mach. Tools Manuf.183103964

[66] [66] Huang H, Lawn B R, Cook R F and Marshall D B 2020 Critique of materials-based models of ductile machining in brittle solidsJ. Am. Ceram. Soc.1036096–100

[67] [67] Zhang Y, Kang R K, Ren J W, Lang H Y and Gao S 2023 Mechanical effect of abrasives on silicon surface in chemo-mechanical grindingInt. J. Mech. Sci.257108544

[68] [68] Utkin A V and Fomin V M 2020 Molecular dynamic calculation of the bulk modulus for silicon and silicon carbideDokl. Phys.65174–7

[69] [69] Xiang H Y, Wang H X, Kang R K and Gao S 2024 Surface roughness model of ground 4H-SiC considering ductile and brittle removalJ. Manuf. Sci. Eng.146071007

[70] [70] Park C H, Cheong B H, Lee K H and Chang K J 1994 Structural and electronic properties of cubic, 2H, 4H, and 6HSiCPhys. Rev.B494485

[71] [71] Chen Y J, Gao Q, Wang Y B, An X H, Liao X Z, Mai Y W, Tan H H, Zou J, Ringer S P and Jagadish C 2015 Determination of young's modulus of ultrathin nanomaterialsNano Lett.155279–83

[72] [72] Schaper M, Jurisch M, Bergner F and Hammer R 2002 Fracture mechanical evaluation of GaAs wafersMRS Online Proc. Libr.744M1.8

[73] [73] Chrobak D, Risnen J and Nowak R 2015 Effect of silicon on the elastic–plastic transition of GaAs crystalScr. Mater.10231–34

[74] [74] Fang T H, Chang W J and Lin C M 2005 Nanoindentation and nanoscratch characteristics of Si and GaAsMicroelectron. Eng.77389–98

[75] [75] Gao S, Li H G, Huang H and Kang R K 2022 Grinding and lapping induced surface integrity of silicon wafers and its effect on chemical mechanical polishingAppl. Surf. Sci.599153982

[76] [76] Agarwal S and Rao P V 2012 Predictive modeling of undeformed chip thickness in ceramic grindingInt. J. Mach. Tools Manuf.5659–68

[77] [77] Malkin S and Guo C 2008Grinding Technology: Theory and Applications of Machining with Abrasives2nd edn (Industrial Press)

[78] [78] Mahmoud T A, Tamaki J and Yan J W 2003 Three-dimensional shape modeling of diamond abrasive grains measured by a scanning laser microscopeKey Eng. Mater.238–239131–6

[79] [79] Herman D and Krzos J 2009 Influence of vitrified bond structure on radial wear of cBN grinding wheelsJ. Mater. Process. Technol.2095377–86

[80] [80] Agarwal S and Rao P V 2010 Modeling and prediction of surface roughness in ceramic grindingInt. J. Mach. Tools Manuf.501065–76