[1] Zong X W, Gao Q, Zhou H Z et al. Effects of bulk laser energy density on anisotropy of selective laser sintered 316L stainless steel[J]. Chinese Journal of Lasers, 46, 0502003(2019).

[2] Zhang R Q, Fan L, Zhou B G et al. Microstructure and properties of selective laser melted 316L stainless steel in different directions[J]. Heat Treatment of Metals, 45, 161-166(2020).

[3] He S Y, Liu X D, Zhao S Z et al. Microstructure and wear resistance of carbon fibers reinforced 316L stainless steel prepared using laser cladding[J]. Chinese Journal of Lasers, 47, 0502010(2020).

[4] Deng Y, Mao Z F, Yang N et al. Collaborative optimization of density and surface roughness of 316L stainless steel in selective laser melting[J]. Materials, 13, 1601(2020).

[5] Hu Z H, Song C H, Liu L Q et al. Research progress of selective laser melting of nitinol[J]. Chinese Journal of Lasers, 47, 1202005(2020).

[6] Rosa B, Mognol P, Hascoët J Y. Laser polishing of additive laser manufacturing surfaces[J]. Journal of Laser Applications, 27, S29102(2015).

[7] Wang X C, Laoui T, Bonse J et al. Direct selective laser sintering of hard metal powders: experimental study and simulation[J]. The International Journal of Advanced Manufacturing Technology, 19, 351-357(2002).

[8] Ferrar B, Mullen L, Jones E et al. Gas flow effects on selective laser melting (SLM) manufacturing performance[J]. Journal of Materials Processing Technology, 212, 355-364(2012).

[9] Li Z H, Kucukkoc I, Zhang D Z et al. Optimising the process parameters of selective laser melting for the fabrication of Ti6Al4V alloy[J]. Rapid Prototyping Journal, 24, 150-159(2018).

[10] Yang C, Dong Z H, Chi C T et al. Microstructure and mechanical properties of 24CrNiMo alloy steel formed by selective laser melting[J]. Chinese Journal of Lasers, 47, 0502008(2020).

[11] Li R D, Shi Y S, Wang Z G et al. Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting[J]. Applied Surface Science, 256, 4350-4356(2010).

[12] Pan L, Zhang C L, Jiang H et al. Influence and optimization of forming process parameters on relative density of 316L stainless steel prepared by selective laser melting[J]. Forging & Stamping Technology, 44, 103-109(2019).

[13] Sun T T, Yang Y Q, Su X B et al. Research of densification of 316L stainless steel powder in selective laser melting process[J]. Laser Technology, 34, 443-446(2010).

[14] Cherry J A, Davies H M, Mehmood S et al. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 76, 869-879(2015).

[15] Yan A R, Yang T T, Wang Y L et al. Thermal properties and mechanical properties of selective laser melting different layer thicknesses of Ni powder[J]. Chinese Journal of Lasers, 43, 0203004(2016).

[16] Niendorf T, Leuders S, Riemer A et al. Highly anisotropic steel processed by selective laser melting[J]. Metallurgical and Materials Transactions B, 44, 794-796(2013).

[17] Yadroitsev I, Smurov I. Selective laser melting technology: from the single laser melted track stability to 3D parts of complex shape[J]. Physics Procedia, 5, 551-560(2010).

[18] Majeed A, Zhang Y F, Lv J X et al. Investigation of T4 and T6 heat treatment influences on relative density and porosity of AlSi10Mg alloy components manufactured by SLM[J]. Computers & Industrial Engineering, 139, 106194(2020).

[19] Ma Y Y, Liu Y D, Shi W T et al. Effect of scanning speed on forming defects and properties of selective laser melted 316L stainless steel powder[J]. Laser & Optoelectronics Progress, 56, 101403(2019).

[20] Simchi A, Petzoldt F, Pohl H. On the development of direct metal laser sintering for rapid tooling[J]. Journal of Materials Processing Technology, 141, 319-328(2003).

[21] Blackwell P L. The mechanical and microstructural characteristics of laser-deposited IN718[J]. Journal of Materials Processing Technology, 170, 240-246(2005).

[22] Choi J P, Shin G H, Yang S S et al. Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting[J]. Powder Technology, 310, 60-66(2017).

[23] Ma M M, Wang Z M, Gao M et al. Layer thickness dependence of performance in high-power selective laser melting of 1Cr18Ni9Ti stainless steel[J]. Journal of Materials Processing Technology, 215, 142-150(2015).