[1] Wang J P, Shen Y F. Research on status analysis of micro milling technology[J]. New Technology & New Process, 1-5(2023).

[2] Pal P, Sato K. Fabrication methods based on wet etching process for the realization of silicon MEMS structures with new shapes[J]. Microsystem Technologies, 16, 1165-1174(2010).

[3] Ding G F, Mao H P, Cai Y L et al. Micromachining of CVD diamond by RIE for MEMS applications[J]. Diamond and Related Materials, 14, 1543-1548(2005).

[4] Tan D Z, Sharafudeen K N, Yue Y Z et al. Femtosecond laser induced phenomena in transparent solid materials: fundamentals and applications[J]. Progress in Materials Science, 76, 154-228(2016).

[5] Bonse J, Krüger J, Höhm S et al. Femtosecond laser-induced periodic surface structures[J]. Journal of Laser Applications, 24, 042006(2012).

[6] Overmeyer L, Duesing J F, Suttmann O et al. Laser patterning of thin film sensors on 3-D surfaces[J]. CIRP Annals, 61, 215-218(2012).

[7] Nolte S, Schrempel F, Dausinger F[M]. Ultrashort pulse laser technology: laser sources and applications(2016).

[8] Kryukov P G. Ultrashort-pulse lasers[J]. Quantum Electronics, 31, 95-119(2001).

[9] Račiukaitis G. Ultra-short pulse lasers for microfabrication: a review[J]. IEEE Journal of Selected Topics in Quantum Electronics, 27, 1100112(2021).

[10] Lutey A H A. An improved model for nanosecond pulsed laser ablation of metals[J]. Journal of Applied Physics, 114, 083108(2013).

[11] Gusarov A V, Smurov I. Thermal model of nanosecond pulsed laser ablation: analysis of energy and mass transfer[J]. Journal of Applied Physics, 97, 014307(2004).

[12] Sasaki T, Shimizu Y, Koshizaki N. Preparation of metal oxide-based nanomaterials using nanosecond pulsed laser ablation in liquids[J]. Journal of Photochemistry and Photobiology A: Chemistry, 182, 335-341(2006).

[13] Simon P, Ihlemann J. Ablation of submicron structures on metals and semiconductors by femtosecond UV-laser pulses[J]. Applied Surface Science, 109, 25-29(1997).

[14] Küper S, Stuke M. Femtosecond UV excimer laser ablation[J]. Applied Physics B, 44, 199-204(1987).

[15] Nikogosyan D N. Long-period gratings in a standard telecom fibre fabricated by high-intensity femtosecond UV and near-UV laser pulses[J]. Measurement Science and Technology, 17, 960-967(2006).

[16] Waugh D G, Lawrence J. On the use of CO2 laser induced surface patterns to modify the wettability of poly(methyl methacrylate) (PMMA)[J]. Optics and Lasers in Engineering, 48, 707-715(2010).

[17] Toossi A, Daneshmand M, Sameoto D. A low-cost rapid prototyping method for metal electrode fabrication using a CO2 laser cutter[J]. Journal of Micromechanics and Microengineering, 23, 047001(2013).

[18] Ooms M D, Jeyaram Y, Sinton D. Disposable plasmonics: rapid and inexpensive large area patterning of plasmonic structures with CO2 laser annealing[J]. Langmuir, 31, 5252-5258(2015).

[19] Choi H W, Farson D F, Bovatsek J et al. Direct-write patterning of indium-tin-oxide film by high pulse repetition frequency femtosecond laser ablation[J]. Applied Optics, 46, 5792-5799(2007).

[20] Chen M F, Chen Y P, Hsiao W T et al. Laser direct write patterning technique of indium tin oxide film[J]. Thin Solid Films, 515, 8515-8518(2007).

[21] Fabris D, Lasagni A F, Fredel M C et al. Direct laser interference patterning of bioceramics: a short review[J]. Ceramics, 2, 578-586(2019).

[22] Tian W T, Wang Z W, Wang C J et al. Effects of bubble behaviors in femtosecond laser machining of silicon wafer in liquids[J]. Journal of Manufacturing Processes, 83, 502-511(2022).

[23] Derrien T J Y, Koter R, Krüger J et al. Plasmonic formation mechanism of periodic 100-nm-structures upon femtosecond laser irradiation of silicon in water[J]. Journal of Applied Physics, 116, 074902(2014).

[24] Zhang D S, Li Z G, Sugioka K. Laser ablation in liquids for nanomaterial synthesis: diversities of targets and liquids[J]. Journal of Physics: Photonics, 3, 042002(2021).

[25] Chen J L, Lu X Z, Wen Q L et al. Review on laser-induced etching processing technology for transparent hard and brittle materials[J]. The International Journal of Advanced Manufacturing Technology, 117, 2545-2564(2021).

[26] Zimmer K, Ehrhardt M, Böhme R. Laser-induced backside wet etching: processes, results, and applications[M]. Laser ablation in liquids: principles and applications in the preparation of nanomaterials(2012).

[27] Zheng Z, Zu X T, Jiang X D et al. Effect of HF etching on the surface quality and laser-induced damage of fused silica[J]. Optics & Laser Technology, 44, 1039-1042(2012).

[28] Hong T F, Ju W J, Wu M C et al. Rapid prototyping of PMMA microfluidic chips utilizing a CO2 laser[J]. Microfluidics and Nanofluidics, 9, 1125-1133(2010).

[29] Zhang C J, Li Z K, Li H Y et al. Femtosecond laser-induced supermetalphobicity for design and fabrication of flexible tactile electronic skin sensor[J]. ACS Applied Materials & Interfaces, 14, 38328-38338(2022).

[30] Lin J, Peng Z W, Liu Y Y et al. Laser-induced porous graphene films from commercial polymers[J]. Nature Communications, 5, 5714(2014).

[31] Wang Y Q, Zhang C J, Meng X L et al. Quantitative and real-time evaluation of pressure on brain spatula with wireless and compact sensing system[J]. Advanced Functional Materials, 33, 2210596(2023).

[32] Choy C H, Cheah K W. Laser-induced etching of silicon[J]. Applied Physics A, 61, 45-50(1995).

[33] Chen L, Wu H, Zhang M C et al. Development of laser-induced deep etching process for through glass via[C](2019).

[34] Zhao T, Zhuo M, Zhou X et al. Fused silica gyroscope resonator manufactured with femtosecond laser assisted wet etching[J]. Journal of Microelectromechanical Systems, 31, 315-317(2022).

[35] Wang X C, Zheng H Y, Chu P L et al. High quality femtosecond laser cutting of alumina substrates[J]. Optics and Lasers in Engineering, 48, 657-663(2010).

[36] Tiggelaar R M, Tas N R, Gardeniers J E et al. Fabrication of microstructures in the bulk and on the surface of sapphire by anisotropic selective wet etching of laser-affected volumes[J]. Journal of Micromechanics and Microengineering, 32, 125003(2022).

[37] Liu H L, Zheng Y, Gan L T et al. UV laser processing of super-hydrophilic graphene films with good electrical conductivity for high-voltage micro-capacitors[C](2024).

[38] Ma X Q, Li R, Jin Z M et al. Injection molding and characterization of PMMA-based microfluidic devices[J]. Microsystem Technologies, 26, 1317-1324(2020).

[39] Lee J K, Park K W, Choi J C et al. Design and fabrication of PMMA-micromachined fluid lens based on electromagnetic actuation on PMMA-PDMS bonded membrane[J]. Journal of Micromechanics and Microengineering, 22, 115028(2012).

[40] Chen P C, Pan C W, Lee W C et al. An experimental study of micromilling parameters to manufacture microchannels on a PMMA substrate[J]. The International Journal of Advanced Manufacturing Technology, 71, 1623-1630(2014).

[41] Shamsi A, Amiri A, Heydari P et al. Low cost method for hot embossing of microstructures on PMMA by SU-8 masters[J]. Microsystem Technologies, 20, 1925-1931(2014).

[42] Zhang C C, Yang C S, Ding D F. Deep reactive ion etching of PMMA[J]. Applied Surface Science, 227, 139-143(2004).

[43] Srinivasan R, Braren B. Ultraviolet laser ablation and etching of polymethyl methacrylate sensitized with an organic dopant[J]. Applied Physics A, 45, 289-292(1988).

[44] Joo Y, Byun J, Seong N et al. Silver nanowire-embedded PDMS with a multiscale structure for a highly sensitive and robust flexible pressure sensor[J]. Nanoscale, 7, 6208-6215(2015).

[45] Chen J, Zheng J H, Gao Q W et al. Polydimethylsiloxane (PDMS)-based flexible resistive strain sensors for wearable applications[J]. Applied Sciences, 8, 345(2018).

[46] Schneider F, Draheim J, Kamberger R et al. Process and material properties of polydimethylsiloxane (PDMS) for optical MEMS[J]. Sensors and Actuators A: Physical, 151, 95-99(2009).

[47] Natarajan S, Chang-Yen D A, Gale B K. Large-area, high-aspect-ratio SU-8 molds for the fabrication of PDMS microfluidic devices[J]. Journal of Micromechanics and Microengineering, 18, 045021(2008).

[48] Hwang Y, Paydar O H, Candler R N. 3D printed molds for non-planar PDMS microfluidic channels[J]. Sensors and Actuators A: Physical, 226, 137-142(2015).

[49] Chang-Yen D A, Eich R K, Gale B K. A monolithic PDMS waveguide system fabricated using soft-lithography techniques[J]. Journal of Lightwave Technology, 23, 2088-2093(2005).

[50] Liu H B, Gong H Q. Templateless prototyping of polydimethylsiloxane microfluidic structures using a pulsed CO2 laser[J]. Journal of Micromechanics and Microengineering, 19, 037002(2009).

[51] Pardeshi V, Sagar S, Murmurwar S et al. Health monitoring systems using IoT and raspberry Pi: a review[C], 134-137(2017).

[52] Pang C, Lee C, Suh K Y. Recent advances in flexible sensors for wearable and implantable devices[J]. Journal of Applied Polymer Science, 130, 1429-1441(2013).

[53] Brannon J, Lankard J. Pulsed CO2 laser etching of polyimide[J]. Applied Physics Letters, 1226-1228(1986).

[54] Braun R, Nowak R, Hess P et al. Photoablation of polyimide with IR and UV laser radiation[J]. Applied Surface Science, 43, 352-357(1989).

[55] Dong Z H, He Q P, Shen D W et al. Microfabrication of functional polyimide films and microstructures for flexible MEMS applications[J]. Microsystems & Nanoengineering, 9, 31(2023).

[56] Zhang Z, Zhu H, Zhang W J et al. A review of laser-induced graphene: from experimental and theoretical fabrication processes to emerging applications[J]. Carbon, 214, 118356(2023).

[57] Koker L, Kolasinski K W. Photoelectrochemical etching of Si and porous Si in aqueous HF[J]. Physical Chemistry Chemical Physics, 2, 277-281(2000).

[58] Heinke R, Ehrhardt M, Bauer J et al. Low surface damage laser processing of silicon by laser-induced plasma etching (LIPE)[J]. Applied Surface Science, 597, 153712(2022).

[59] Lau J H. Recent advances and trends in advanced packaging[J]. IEEE Transactions on Components, 12, 228-252(2022).

[60] Qin J, Jiang S B, Wang Z S et al. Metasurface micro/nano-optical sensors: principles and applications[J]. ACS Nano, 16, 11598-11618(2022).

[61] Cong Q D, Yuan G F, Zhang C et al. Review of research progress on laser etching of quartz glass[C], 8(2017).

[62] Chen L, Yang X F, Yu D Q. Development of through glass via technology[J]. Electronics and Packaging, 21, 5-17(2021).

[63] Masuda M, Sugioka K, Cheng Y et al. 3-D microstructuring inside photosensitive glass by femtosecond laser excitation[J]. Applied Physics A, 76, 857-860(2003).

[64] owak R, Metev S, Sepold G. Laser chemical etching of metals in liquids[J]. Materials and Manufacturing Processes, 9, 429-446(1994).

[65] Tiggelaar R M, Tas N R, Gardeniers J E et al. Fabrication of microstructures in the bulk and on the surface of sapphire by anisotropic selective wet etching of laser-affected volumes[J]. Journal of Micromechanics and Microengineering, 32, 125003(2022).

[66] Chen J Y, Zang H W, Cao J C et al. Soliton‑based few‑cycle femtosecond laser pulse[J]. Chinese Journal of Lasers, 51, 2201006(2024).

[67] Zhang J W, Hu J P, Sun M J et al. Design of micromirror array for freeform illumination in lithography systems[J]. Chinese Journal of Lasers, 51, 2201003(2024).

[68] Ji L X B, Zhang J H. A series of research progress in through glass vias 3D integration technology[J]. Electronics and Packaging, 24, 101-102(2024).

[69] Garner S, Vaddi R, Kanungo M et al. 20-2: integration of through glass via interconnects within thin film transistor active matrix backplanes[J]. SID Symposium Digest of Technical Papers, 53, 218-220(2022).

[70] Shorey A B, Kuramochi S, Yun C H. Through glass via (TGV) technology for RF applications[J]. International Symposium on Microelectronics, 2015, 386-389(2015).

[71] Fu Y C, Han G W, Gu J B et al. A high-performance MEMS accelerometer with an improved TGV process of low cost[J]. Micromachines, 13, 1071(2022).

[72] Hwangbo S, Fang S P, An H et al. Directional through glass via (TGV) antennas for wireless point-to-point interconnects in 3D integration and packaging[C], 260-265(2017).

[73] Qin J, Yin L J, Hao Y N et al. Flexible and stretchable capacitive sensors with different microstructures[J]. Advanced Materials, 33, e2008267(2021).

[74] Cai Z M, Kuang C F, Yang H Y et al. Hybrid laser manufacturing and applications in flexible micro-nano sensors (invited)[J]. Chinese Journal of Lasers, 51, 0402403(2024).

[75] Xu K C, Ko S H, Chen J. Advances in wearable and implantable bioelectronics for precision medicine[J]. Bio-Design and Manufacturing, 7, 383-387(2024).

[76] Lu Y Y, Kong D P, Yang G et al. Machine learning-enabled tactile sensor design for dynamic touch decoding[J]. Advanced Science, 10, e2303949(2023).

[77] Li T, Pan P, Yang Z C et al. Research on PDMS TENG of laser etch 3D structure[J]. Journal of Materials Science, 57, 6723-6733(2022).

[78] Zhao Q N, Gribkova E, Shen Y Y et al. Highly stretchable and customizable microneedle electrode arrays for intramuscular electromyography[J]. Science Advances, 10, eadn7202(2024).

[79] Huang K, Liu B, Orban M et al. Accurate flexible temperature sensor based on laser-induced graphene material[J]. Shock and Vibration, 1-7(2021).

[80] Hansen W W, Janson S W, Helvajian H. Direct-write UV laser microfabrication of 3D structures in lithium-aluminosilicate glass[J]. Proceedings of SPIE, 2991, 104-112(1997).

[81] Li Q Y, Niu K, Wang D et al. Low-cost rapid prototyping and assembly of an open microfluidic device for a 3D vascularized organ-on-a-chip[J]. Lab on a Chip, 22, 2682-2694(2022).

[82] Kim E S, Cho M, Choi I et al. Fabrication of perfluoropolyether microfluidic devices using laser engraving for uniform droplet production[J]. Micromachines, 15, 599(2024).

[83] Ni J C, Wang C W, Zhang C C et al. Three-dimensional chiral microstructures fabricated by structured optical vortices in isotropic material[J]. Light: Science & Applications, 6, e17011(2017).

[84] Luo S W, Chang T L, Tsai H Y. Fabrication of glass micro-prisms using ultra-fast laser pulses with chemical etching process[J]. Optics and Lasers in Engineering, 50, 220-225(2012).

[85] Yong J L, Fang Y, Chen F et al. Femtosecond laser ablated durable superhydrophobic PTFE films with micro-through-holes for oil/water separation: separating oil from water and corrosive solutions[J]. Applied Surface Science, 389, 1148-1155(2016).

[86] Li W, Xi X, Lu K et al. A novel high transduction efficiency micro shell resonator gyroscope with 16 T-shape masses using out-of-plane electrodes[J]. IEEE Sensors Journal, 19, 4820-4828(2019).

[87] Zhuo M, Tan X Y, Li Q S et al. Dry etching fabrication for ring vibration resonator based on quartz[J]. Silicon, 15, 3657-3662(2023).

[88] Vatanparvar D, Hii D, Shkel A M. Fabrication process and structural characterization of fused silica-on-silicon toroidal ring gyroscope[C](2021).

[89] Tsai C H, Chen H W. Laser cutting of thick ceramic substrates by controlled fracture technique[J]. Journal of Materials Processing Technology, 136, 166-173(2003).

[90] Iwatani N, Doan H D, Fushinobu K. Optimization of near-infrared laser drilling of silicon carbide under water[J]. International Journal of Heat and Mass Transfer, 71, 515-520(2014).