[1] Yang X, Xu L, Yang C H et al. High-quality ghost imaging based on joint bilateral filter[J]. Acta Optica Sinica, 40, 1411002(2020).

[2] Zhang L H, Chen P. Application of advanced resin matrix composite in satellite antenna system[J]. Aerospace Materials & Technology, 41, 1-5(2011).

[3] Zhang D C, Zhang Y P, Huang F Q et al. Application of carbon fiber composite materials in satellite antenna structure[J]. Electro-Mechanical Engineering, 34, 52-55(2018).

[4] Zhang B M, Liu S. Investigation on status and prospective application of composite multifunctional structures technology[J]. Journal of Astronautics, 28, 493-497(2007).

[5] Yang J P, Chen X K, Wu G et al. Mechanism of nano-second laser ablation of metallic thin film on composite material[J]. Chinese Journal of Lasers, 38, 0603031(2011).

[6] Zhang F, Zeng X Y, Li X Y et al. Laser etching and cutting printed circuit board by 355 nm and 1064 nm diode pumped solid state lasers[J]. Chinese Journal of Lasers, 35, 1637-1643(2008).

[7] Ni C, Wang M D, Shi K M et al. Forming micro lines by etching of FR- 4 copper clad laminate with femtosecond laser[J]. Laser & Infrared, 49, 410-418(2019).

[8] Shi F, Zhu Z W, Cheng X A et al. The evolution of coating threshold damage to peeling off under femtosecond laser irradiation[J]. Journal of Infrared and Millimeter Waves, 36, 361-366(2017).

[9] Xiao R S, Zhang H Z, Huang T. Recent progress in femtosecond pulsed laser processing research[J]. Journal of Mechanical Engineering, 52, 176-186(2016).

[10] Li M, Zhang L, Luo F et al. Experimental research on the ablation of lamination composite films[J]. Applied Laser, 30, 10-14(2010).

[11] Chung C K, Tan T K, Lin S L et al. Fabrication of sub-spot-size microchannel of microfluidic chip using CO2 laser processing with metal-film protection[J]. Micro & Nano Letters, 7, 736(2012). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6294594

[12] Ren Q H, Xie F Z. Research on simulation and design of doubly-fed motor speed control system[J]. Journal of Changchun Institute of Technology (Natural Sciences Edition), 12, 55-57, 65(2011).

[13] Guo H F, Li J L, Sun T. On the research progress of laser cutting technology[J]. Journal of Xuzhou Institute of Technology (Natural Sciences Edition), 30, 71-78(2015).

[14] Qiao L L, Chu W, Wang Z et al. Three-dimensional microfabrication by shaped femtosecond laser pulses[J]. Acta Optica Sinica, 39, 0126012(2019).

[15] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[16] Chen L, Liu X D, Liu J et al. Microgroove etching with femtosecond laser on quartz glass surface[J]. Acta Optica Sinica, 40, 2314001(2020).

[17] Maekawa S, Shibasaki K, Kurose T et al. Tear propagation of a high-performance airship envelope material[J]. Journal of Aircraft, 45, 1546-1553(2008). http://d.wanfangdata.com.cn/Periodical_NSTL_QKJJ027584748.aspx

[18] Suslova A. Multi-dimensional simulation and experimental benchmarking of ultrashort pulsed laser interactions with metallic targets[D](2018).

[19] Li T, Zhou C L, Liu Z G et al. Simulation of laser ablation of crystalline silicon solar cells by ANSYS[C]. //2011 International Conference on Consumer Electronics, Communications and Networks (CECNet), April 16-18, 2011, Xianning, China., 5228-5231(2011).

[20] Guo Z N, Liu X H, Zhang Z H. Simulation and verification of three-dimensional shape measurement method for composite surface[J]. Laser & Optoelectronics Progress, 57, 191202(2020).

[21] Li M, Zhang Q, Yang D et al. Femtosecond laser writing of depressed cladding waveguide and its applications[J]. Laser & Optoelectronics Progress, 57, 111427(2020).

[22] Cui Y, Zhang H Y, Zhao Y A et al. Microscopic properties changes of Au film under action of femtosecond laser[J]. Chinese Journal of Lasers, 46, 0203001(2019).

[23] Zang Y N, Ni X W, Chen Y B. Simulation of long pulsed laser drilling on metal based on birth and death method of ANSYS[J]. Chinese Journal of Lasers, 40, 0603005(2013).

[24] Qian D H, Wei L, Xie H Y. Numerical simulation of temperature field pulse laser marking hard brittle material based on ANSYS[J]. Optical Technique, 39, 530-534(2013).

[25] Liu Y X, Liu S B, Chen T. Mechanism of ablation in short-pulse laser-copper targetinteraction[J]. High Power Laser and Particle Beams, 19, 1271-1274(2007).