[1] Wang T M. Research on the micro-modelling of metal solidification process[D](2000).

[2] Aboulkhair N T, Simonelli M, Parry L et al. 3D printing of Aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting[J]. Progress in Materials Science, 106, 100578(2019).

[3] Mostafaei A, Zhao C, He Y N et al. Defects and anomalies in powder bed fusion metal additive manufacturing[J]. Current Opinion in Solid State and Materials Science, 26, 100974(2022).

[4] Wang W J, Yuan T C, Li R D et al. Electrochemical corrosion behaviors of Pb-Ag anodes by electric current pulse assisted casting[J]. Journal of Electroanalytical Chemistry, 847, 113250(2019).

[5] Wang C L, Dong Z Y, Li K et al. A novel process for grain refinement of Mg-RE alloys by low frequency electro-magnetic stirring assisted near-liquidus squeeze casting[J]. Journal of Materials Processing Technology, 303, 117537(2022).

[6] Zhou H X, Song C H, Yang Y Q et al. The microstructure and properties evolution of SS316L fabricated by magnetic field-assisted laser powder bed fusion[J]. Materials Science and Engineering: A, 845, 143216(2022).

[7] Eskin G I. Influence of cavitation treatment of melts on the processes of nucleation and growth of crystals during solidification of ingots and castings from light alloys[J]. Ultrasonics Sonochemistry, 1, S59-S63(1994).

[8] Eskin G I. Broad prospects for commercial application of the ultrasonic (cavitation) melt treatment of light alloys[J]. Ultrasonics Sonochemistry, 8, 319-325(2001).

[9] Ma L Q, Shu G J, Chen F. Research on solidification of metal melt under ultrasonic field[J]. Journal of Materials Science and Engineering, 13, 2-7, 29(1995).

[10] Eskin G I. Principles of ultrasonic treatment: application for light alloys melts[J]. Advanced Performance Materials, 4, 223-232(1997).

[11] Chen J, Yao Z H, Yao J H et al. State-of-art review on ultrasonic vibration-assisted laser cladding[J]. Aeronautical Manufacturing Technology, 64, 36-46(2021).

[12] Kumar A, Kumaresan T, Pandit A B et al. Characterization of flow phenomena induced by ultrasonic horn[J]. Chemical Engineering Science, 61, 7410-7420(2006).

[13] Wang S, Kang J, Zhang X et al. Dendrites fragmentation induced by oscillating cavitation bubbles in ultrasound field[J]. Ultrasonics, 83, 26-32(2018).

[14] Wang B, Tan D Y, Lee T L et al. Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound[J]. Acta Materialia, 144, 505-515(2018).

[15] Liang Y J, Cheng X, Li J et al. Microstructural control during laser additive manufacturing of single-crystal nickel-base superalloys: New processing‒microstructure maps involving powder feeding[J]. Materials & Design, 130, 197-207(2017).

[16] Qu W X, Xie Y H, Shen Y et al. Simulation on the effects of various factors on the motion of ultrasonic cavitation bubble[J]. Mathematical Modelling of Engineering Problems, 4, 173-178(2017).

[17] Vanhille C. A fourth-order approximation Rayleigh-Plesset equation written in volume variation for an adiabatic-gas bubble in an ultrasonic field: Derivation and numerical solution[J]. Results in Physics, 25, 104193(2021).

[18] Kong W, Cang D Q. Effects of ultrasound on the flow field in molten steel and solidification structure[J]. Simulation, 88, 694-706(2012).

[19] Muller P B, Barnkob R, Jensen M J H et al. A numerical study of microparticle acoustophoresis driven by acoustic radiation forces and streaming-induced drag forces[J]. Lab on a Chip, 12, 4617-4627(2012).

[20] Wang C Y. Numerical simulation and experimental research of IN718 coating fabricated by ultrasonic vibration-assisted laser cladding[D](2022).

[21] Yao Z H, Pan C H, Chi Y M et al. Research progress of ultrasonic assisted laser manufacturing technology (invited)[J]. Chinese Journal of Lasers, 51, 0402103(2024).

[22] Singh P. Ultrasonic vibration-assisted superior thermal transport[J]. International Journal of Heat and Mass Transfer, 213, 124366(2023).

[23] Wei X, Li X L, Zhang L Q et al. Effect of in situ ultrasonic impact treatment on flow and solidification behavior of laser metal deposition: by finite element simulation[J]. International Journal of Heat and Mass Transfer, 192, 122914(2022).

[24] Jiang R P, Li X Q, Chen P H et al. Effect and kinetic mechanism of ultrasonic vibration on solidification of 7050 aluminum alloy[J]. AIP Advances, 4, 077125(2014).

[25] Sui D S, Han Q Y. Ultrasound-assisted cast-on method: obtaining high-quality metallurgical bonds between a bare steel insert and A354 aluminum alloy within a composite casting[J]. Journal of Materials Processing Technology, 311, 117783(2023).

[26] Yao Y, Pan Y, Liu S Q. Power ultrasound and its applications: a state-of-the-art review[J]. Ultrasonics Sonochemistry, 62, 104722(2020).

[27] Guo M H. Experiment of ultrasonic assisted laser clad YSZ ceramic coating[D](2015).

[28] Lin X. Research on prediction of ultrasonic assisted laser welding forming based on characteristics of molten pool and plasma[D](2020).

[29] Zhuang D D, Lian X L, Zhou T Y et al. The influence of ultrasonic assistance and laser melting on the microstructure and properties of AZ91D magnesium alloy[J]. Surface and Coatings Technology, 479, 130541(2024).

[30] Lu X J. Microstructure regulation and performance studies on ultrasonic assisted laser remanufacturing of IN939 superalloy[D](2020).

[31] Rabiey M, Weidmann R, Sgier S et al. Ultrasonic-assisted laser metal deposition (LMD) of steel 316L[J]. Procedia CIRP, 113, 307-311(2022).

[32] Gorunov A I. Additive manufacturing of Ti6Al4V parts using ultrasonic assisted direct energy deposition[J]. Journal of Manufacturing Processes, 59, 545-556(2020).

[33] Zhu L D, Yang Z C, Xin B et al. Microstructure and mechanical properties of parts formed by ultrasonic vibration-assisted laser cladding of Inconel 718[J]. Surface and Coatings Technology, 410, 126964(2021).

[34] Yang Z C, Wang S H, Zhu L D et al. Manipulating molten pool dynamics during metal 3D printing by ultrasound[J]. Applied Physics Reviews, 9, 021416(2022).

[35] Wu D J, Song C C, Di T D et al. Intermetallic regulation mechanism of inconel 718/Ti6Al4V composite by novel follow-up ultrasonic assisted laser additive manufacturing[J]. Composites Part B: Engineering, 235, 109736(2022).

[36] Li Y. Study on ultrasonic-laser hybrid additive manufacturing process and mechanical properties of TiC-enhanced TC4 coating[D](2021).

[37] Zhou L, Chen S Y, Jia W M et al. Effects of preheating-ultrasonic synergistic on the microstructure and strength-ductility of 24CrNiMoY alloy steel by laser directed energy deposition[J]. Materials Science and Engineering: A, 863, 144463(2023).

[38] Fotovvati B, Wayne S F, Lewis G et al. A review on melt-pool characteristics in laser welding of metals[J]. Advances in Materials Science and Engineering, 2018, 4920718(2018).

[39] Liu Z G, Jin X Z, Zhang J Y et al. Microstructure evolution and mechanical properties of SUS301L stainless steel sheet welded joint in ultrasonic vibration assisted laser welding[J]. Optics & Laser Technology, 153, 108193(2022).

[40] Liu Z G, Jin X Z, Li J H et al. Numerical simulation and experimental analysis on the deformation and residual stress in trailing ultrasonic vibration assisted laser welding[J]. Advances in Engineering Software, 172, 103200(2022).

[41] Zhang J Q, Liu Y Q, He S X et al. Ultrasonic vibration steel/aluminum butt joints by laser-MIG hybrid fusion-brazing welding[J]. Chinese Journal of Lasers, 49, 1602013(2022).

[42] Chen C, Fan C L, Lin S B et al. Effect of ultrasonic pattern on weld appearance and droplet transfer in ultrasonic assisted MIG welding process[J]. Journal of Manufacturing Processes, 35, 368-372(2018).

[43] Chen X, Fu J, Zhao Y et al. Melting behavior in ultrasonic-assisted narrow-gap laser welding with filler wire[J]. Journal of Laser Applications, 33, 012058(2021).

[44] Liu J, Zhu H Y, Li Z et al. Effect of ultrasonic power on porosity, microstructure, mechanical properties of the aluminum alloy joint by ultrasonic assisted laser-MIG hybrid welding[J]. Optics & Laser Technology, 119, 105619(2019).

[45] Lei Z L, Bi J, Li P et al. Melt flow and grain refining in ultrasonic vibration assisted laser welding process of AZ31B magnesium alloy[J]. Optics & Laser Technology, 108, 409-417(2018).

[46] Tarasov S Y, Vorontsov A V, Fortuna S V et al. Ultrasonic-assisted laser welding on AISI 321 stainless steel[J]. Welding in the World, 63, 875-886(2019).

[47] Abramov V, Abramov O, Bulgakov V et al. Solidification of aluminium alloys under ultrasonic irradiation using water-cooled resonator[J]. Materials Letters, 37, 27-34(1998).

[48] Eskin G I, Eskin D G. Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt[J]. Ultrasonics Sonochemistry, 10, 297-301(2003).

[49] Jian X, Xu H, Meek T T et al. Effect of power ultrasound on solidification of aluminum A356 alloy[J]. Materials Letters, 59, 190-193(2005).

[50] Xu J L, Li Z G, Guo H F et al. Research progress of crack defect in laser cladding layer[J]. Hot Working Technology, 42, 6-9(2013).

[51] Dong H, Guo P F, Han Y et al. Enhanced corrosion resistance of high speed laser-cladded Ni/316L alloy coating by heat treatment[J]. Journal of Materials Research and Technology, 24, 952-962(2023).

[52] Dubourg L, St-Georges L. Optimization of laser cladding process using taguchi and EM methods for MMC coating production[J]. Journal of Thermal Spray Technology, 15, 790-795(2006).

[53] Jin J J, Chen B, Zhang Z Y et al. Effects of Mo content on the microstructure and mechanical properties of laser cladded FeCoCrNiMox (x=0.2, 0.5) high-entropy alloy coatings[J]. Surface and Coatings Technology, 482, 130697(2024).

[54] Zhang Z, Li J N, Zhao B B et al. Microstructure and excellent performance enhancement of MEA base composites with multi-phase induced by ultrasonic assisted laser technology[J]. Journal of Alloys and Compounds, 938, 168639(2023).

[55] Xiao M Y, Jiang F C. Microstructural evolution of Fe-based amorphous alloy coatings via ultrasonic vibration-assisted laser cladding[J]. Materials Letters, 322, 132520(2022).

[56] Wen X, Cui X F, Jin G et al. Design and characterization of FeCrCoAlMn0.5Mo0.1 high-entropy alloy coating by ultrasonic assisted laser cladding[J]. Journal of Alloys and Compounds, 835, 155449(2020).

[57] Yao Z H, Wang F B, Sun Z Q et al. Effects of ultrasound on distribution of laser melt injected WC reinforced particles on stainless steel substrate surface[J]. Chinese Journal of Lasers, 50, 1202202(2023).

[58] Zhuang D D, Du B, Zhang S H et al. Effect and action mechanism of ultrasonic assistance on microstructure and mechanical performance of laser cladding 316L stainless steel coating[J]. Surface and Coatings Technology, 433, 128122(2022).

[59] Zhang M, Zhao G L, Wang X H et al. Microstructure evolution and properties of in situ ceramic particles reinforced Fe-based composite coating produced by ultrasonic vibration assisted laser cladding processing[J]. Surface and Coatings Technology, 403, 126445(2020).

[60] Wen X, Cui X F, Jin G et al. Novel nano-lamellar AlCoCrFeMn0.5Mo0.1Nbx eutectic high-entropy alloy coatings by ultrasonic assisted laser cladding: microstructure and tribological behaviors[J]. Intermetallics, 156, 107851(2023).

[61] Han X, Li C, Yang Y P et al. Experimental research on the influence of ultrasonic vibrations on the laser cladding process of a disc laser[J]. Surface and Coatings Technology, 406, 126750(2021).

[62] Zhao Y, Wu M F, Hou J et al. Microstructure and high temperature properties of laser cladded WTaNbMo refractory high entropy alloy coating assisted with ultrasound vibration[J]. Journal of Alloys and Compounds, 920, 165888(2022).

[63] Biswas S, Alavi S, Harimkar S. Effect of laser remelting and simultaneous application of ultrasonic vibrations during laser melting on the microstructural and tribological properties of laser clad Al-SiC composites[J]. Journal of Composites Science, 1, 13(2017).

[64] Zhuang D D, Tao W W, Zhang Z Y et al. Effects of ultrasound on the CrMnFeCoNi coatings with different TiC contents fabricated by laser cladding[J]. Journal of Alloys and Compounds, 960, 170532(2023).

[65] Fan Q K, Chen C, Fan C L et al. Ultrasonic induces grain refinement in gas tungsten arc cladding AlCoCrFeNi high-entropy alloy coatings[J]. Materials Science and Engineering: A, 821, 141607(2021).

[66] Fan Q K, Chen C, Fan C L et al. Ultrasonic suppression of element segregation in gas tungsten arc cladding AlCoCuFeNi high-entropy alloy coatings[J]. Surface and Coatings Technology, 420, 127364(2021).

[67] Aboulkhair N T, Everitt N M, Ashcroft I et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting[J]. Additive Manufacturing, 1, 77-86(2014).

[68] Cai Y H, Xiong J, Chen H et al. A review of in situ monitoring and process control system in metal-based laser additive manufacturing[J]. Journal of Manufacturing Systems, 70, 309-326(2023).

[69] Gong H J, Rafi K, Gu H F et al. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes[J]. Additive Manufacturing, 1, 87-98(2014).

[70] Gu D D, Hagedorn Y C, Meiners W et al. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium[J]. Acta Materialia, 60, 3849-3860(2012).

[71] Li R D, Liu J H, Shi Y S et al. 316L stainless steel with gradient porosity fabricated by selective laser melting[J]. Journal of Materials Engineering and Performance, 19, 666-671(2010).

[72] Tolochko N K, Mozzharov S E, Yadroitsev I A et al. Balling processes during selective laser treatment of powders[J]. Rapid Prototyping Journal, 10, 78-87(2004).

[73] Zhao Y N, Ma Z Q, Yu L M et al. New alloy design approach to inhibiting hot cracking in laser additive manufactured nickel-based superalloys[J]. Acta Materialia, 247, 118736(2023).

[74] Zhang X B, Dang X A, Yang L J. Study on balling phenomena in selective laser melting[J]. Laser & Optoelectronics Progress, 51, 061401(2014).

[75] Lee H, Lim C H J, Low M J et al. Lasers in additive manufacturing: a review[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 4, 307-322(2017).

[76] Park H, Park J J, Bui P D et al. Laser-based selective material processing for next-generation additive manufacturing[J]. Advanced Materials, e2307586(2023).

[77] Pinkerton A J. Lasers in additive manufacturing[J]. Optics & Laser Technology, 78, 25-32(2016).

[78] Todaro C J, Easton M A, Qiu D et al. Grain refinement of stainless steel in ultrasound-assisted additive manufacturing[J]. Additive Manufacturing, 37, 101632(2021).

[79] Todaro C J, Easton M A, Qiu D et al. Grain structure control during metal 3D printing by high-intensity ultrasound[J]. Nature Communications, 11, 142(2020).

[80] Wang T Z, Mazánová V, Liu X. Ultrasonic effects on gas tungsten arc based wire additive manufacturing of aluminum matrix nanocomposite[J]. Materials & Design, 214, 110393(2022).

[81] Wang Z, Jiang F C, Guo C H et al. Effects of ultrasonic vibration on microstructure and mechanical properties of 1Cr12Ni3MoVN alloy fabricated by directed energy deposition[J]. Ultrasonics, 132, 106989(2023).

[82] Shang X F, Dong J Z, Zhang Y W et al. DED joining process and ultrasonic-assisted performance optimization of high-strength aluminum alloys manufactured by SLM[J]. Acta Optica Sinica, 44, 0422002(2024).

[83] Zhao Y H, He C, Zou J et al. Effect of external field on microstructure and properties of Al-Mg-Sc-Zr alloy prepared by laser melting deposition[J]. Acta Optica Sinica, 43, 0214002(2023).

[84] Wang H, Hu Y B, Ning F D et al. Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: effects of ultrasonic frequency on microstructural and mechanical properties[J]. Journal of Materials Processing Technology, 276, 116395(2020).

[85] Li H G, Huang Y J, Jiang S S et al. Columnar to equiaxed transition in additively manufactured CoCrFeMnNi high entropy alloy[J]. Materials & Design, 197, 109262(2021).

[86] Zheng M Y, Li C W, Zhang X Y et al. The influence of columnar to equiaxed transition on deformation behavior of FeCoCrNiMn high entropy alloy fabricated by laser-based directed energy deposition[J]. Additive Manufacturing, 37, 101660(2021).

[87] Zhou Y, Li X G, Guo C et al. Investigation of columnar to equiaxial transition criterion and solidification conditions for Ni-based superalloy in laser powder bed fusion[J]. Journal of Alloys and Compounds, 966, 171611(2023).

[88] Cong W L, Ning F D. A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping of stainless steel[J]. International Journal of Machine Tools and Manufacture, 121, 61-69(2017).

[89] Yuan D, Shao S Q, Guo C H et al. Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration[J]. Ultrasonics Sonochemistry, 73, 105472(2021).

[90] Zhang A F, Fu T, Wang T et al. Effect of ultrasonic vibration on microstructure and properties of laser cladded and solution-aging treated Ti6Al4V alloys[J]. Chinese Journal of Lasers, 45, 1202004(2018).

[91] Yuan D, Sun X J, Sun L B et al. Improvement of the grain structure and mechanical properties of austenitic stainless steel fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration[J]. Materials Science and Engineering: A, 813, 141177(2021).

[92] Masaylo D, Igoshin S, Popovich A et al. Microstructural and hardness behavior of H13 tool steel manufactured by ultrasound-assisted laser-directed energy deposition[J]. Metals, 12, 450(2022).

[93] Niu F Y, Li Y, Song C C et al. Microstructure and wear resistance of TiCp/Ti6Al4V composite coatings by follow-up ultrasonic-assisted laser additive manufacturing[J]. Coatings, 12, 986(2022).

[94] Hu Y B, Ning F D, Cong W L et al. Ultrasonic vibration-assisted laser engineering net shaping of ZrO2-Al2O3 bulk parts: Effects on crack suppression, microstructure, and mechanical properties[J]. Ceramics International, 44, 2752-2760(2018).

[95] Lowe P S, Honey X, Crossley J et al. Scaling-up ultrasonic vibration assisted additive manufacturing to build 316 L 3 m3 waste container flange[J]. Journal of Manufacturing Processes, 83, 97-104(2022).