[1] CHOI U M, BLAABJERG F, JORGENSEN S et al. Power cycling test and failure analysis of molded intelligent power IGBT module under different temperature swing durations[J]. Microelectronics Reliability, 64: 403(2016).

[2] CABELLO M, SOLER V, RIUS G et al. Advanced processing for mobility improvement in 4H-SiC MOSFETs: a review[J]. Materials Science in Semiconductor Processing, 78: 22(2018).

[3] BUTTAY C, PLANSON D, ALLARD B et al. State of the art of high temperature power electronics[J]. Materials Science and Engineering: B, 283(2011).

[4] EDDY C R, GASKILL D K. Silicon carbide as a platform for power electronics[J]. Science, 1398(2009).

[5] MURAYAMA N, HIRAO K, SANDO M et al. High-temperature electro-ceramics and their application to SiC power modules[J]. Ceramics International, 3523(2018).

[6] OKUMURA H. Present status and future prospect of widegap semiconductor high-power devices[J]. Japanese Journal of Applied Physics, 7565(2006).

[7] HIRAO K, ZHOU Y, MIYAZAKI H. 3-Substrate. Wide bandgap power semiconductor packaging[M]. Woodhead Publishing.

[8] KITAYAMA M[M]. High thermal conductivity ceramics. Encyclopedia of materials:technical ceramics and glasses, 165.

[9] FUKUDA S, SHIMADA K, IZU N et al. Crack generation in electroless nickel plating layers on copper-metallized silicon nitride substrates during thermal cycling[J]. Journal of Materials Science: Materials in Electronics, 8278(2017).

[10] RILEY F L. Silicon nitride and related materials[J]. Journal of the American Ceramic Society, 245(2000).

[11] HAGGERTY J S, LIGHTFOOT A. Opportunities for enhancing the thermal conductivities of SiC and Si₃N₄ ceramics through improved processing[conf-proc]. Ceramic Engineering and Science Proceedings., : 475(1995).

[12] KRSTIC Z, KRSTIC V D. Silicon nitride: the engineering material of the future[J]. Journal of Materials Science, 535(2012).

[13] HIRAO K, WATARI K, HAYASHI H et al. High thermal conductivity silicon nitride ceramic[J]. MRS Bulletin, 451(2001).

[14] HIRAO K, ZHOU Y, HYUGA H et al. High thermal conductivity silicon nitride ceramics[J]. Journal of the Korean Ceramic Society, 380(2012).

[15] WATARI K. High thermal conductivity non-oxide ceramics[J]. Journal of the Ceramic Society of Japan, S7(2001).

[16] ZHOU Y, HYUGA H, KUSANO D et al. A tough silicon nitride ceramic with high thermal conductivity[J]. Advanced Materials, 4563(2011).

[17] KITAYAMA M, HIRAO K, TSUGE A et al. Oxygen content in ß-Si₃N₄ crystal lattice[J]. Journal of the American Ceramic Society, 3263(1999).

[18] KITAYAMA M, HIRAO K, TSUGE A et al. Thermal conductivity of β-Si₃N₄: II, effect of lattice oxygen[J]. Journal of the American Ceramic Society, 1985(2000).

[19] KUSANO D, NODA Y, SHIBASAKI H et al. Effects of impurity iron content on characteristics of sintered reaction-bonded silicon nitride[J]. International Journal of Applied Ceramic Technology, 690(2013).

[20] MATSUNAGA C, ZHOU Y, KUSANO D et al. Dielectric breakdown of silicon nitride substrates with various thicknesses[J]. Journal of the Ceramic Society of Japan, 693(2018).

[21] NAKASHIMA Y, HYUGA H, HIRAO K et al. Thickness dependence of dielectric breakdown strength for silicon nitride substrate[J]. Journal of the Ceramic Society of Japan, 761(2021).

[22] FUKUDA S, SHIMADA K, IZU N et al. Relationship between the thermal stress and structures of thermal-cycling-induced cracks in electroless nickel plating on metalized substrates[J]. Journal of Materials Science: Materials in Electronics, 5820(2019).

[23] MIYAZAKI H, HIRAO K, HYUGA H. Round-robin exercise on the three- and four-point flexural strength of thin ceramic plates for power modules[J]. International Journal of Applied Ceramic Technology, 2121(2019).

[24] WAKASUGI N, CHEN C, HIRAO K et al[J]. Thermal evaluation of metalized ceramic substrates for use in next-generation power modules toward international standardization(2020).

[25] HIRAO K, ZHOU Y, HYUGA H et al. Evaluation of thermal resistance for metalized ceramic substrates using a microheater chip[J]. International Journal of Applied Ceramic Technology, 232(2021).

[26] SLACK G A. Nonmetallic crystals with high thermal conductivity[J]. Journal of Physics and Chemistry of Solids, 321(1973).

[27] SLACK G A, TANZILLI R A, POHL R O et al. The intrinsic thermal conductivity of AIN.[J]. Journal of Physics and Chemistry of Solids, 641(1987).

[28] TAKEDA Y. Development of high-thermal-conductivity SiC ceramics[J]. American Ceramic Society Bulletin, 1961(1988).

[29] NAKANO H, WATARI K, HAYASHI H et al. Microstructural characterization of high-thermal-conductivity aluminum nitride ceramic[J]. Journal of the American Ceramic Society, 3093(2002).

[30] HAMPSHIRE S, PARK H K, THOMPSON D P et al. α’-Sialon ceramics[J]. Nature, 880(1978).

[31] KRäMER M, WITTMÜSS D, KÜPPERS H et al. Relations between crystal structure and growth morphology of β-Si₃N₄[J]. Journal of Crystal Growth, 157(1994).

[32] THOMAS A, MÜLLER G. Determination of the concentration of oxygen dissolved in the AlN lattice by hot gas extraction from AlN ceramics[J]. Journal of the European Ceramic Society, 11(1991).

[33] HIROSAKI N, OKAMOTO Y, ANDO M et al. Thermal conductivity of gas-pressure-sintered silicon nitride[J]. Journal of the American Ceramic Society, 2878(1996).

[34] HIROSAKI N, OKAMOTO Y, ANDO M et al. Effect of grain growth on the thermal conductivity of silicon nitride[J]. Journal of the Ceramic Society of Japan, 49(1996).

[35] KITAYAMA M, HIRAO K, TORIYAMA M et al. Thermal conductivity of ß-Si₃N₄: I, effects of various microstructural factors[J]. Journal of the American Ceramic Society, 3105(1999).

[36] PRIEST H F, BURNS F C, PRIEST G L et al. Oxygen content of alpha silicon nitride[J]. Journal of the American Ceramic Society, 395(1973).

[37] PEUCKERT M, GREIL P. Oxygen distribution in silicon nitride powders[J]. Journal of Materials Science, 22: 3717(1987).

[38] KIJIMA K, KATO K, INOUE Z et al. Oxygen content of α-Si₃N₄ single crystals[J]. Journal of Materials Science, 362(1975).

[39] HIROSAKI N, OKADA A, MATOBA K. Sintering of Si₃N₄ with the addition of rare-earth-oxides[J]. Journal of the American Ceramic Society, C144(1988).

[40] KITAYAMA M, HIRAO K, KANZAKI S. Effect of rare earth oxide additives on the phase transformation rates of Si₃N₄[J]. Journal of the American Ceramic Society, 2612(2006).

[41] BECHER P F, PAINTER G S, SHIBATA N et al. Effects of rare-earth (RE) intergranular adsorption on the phase transformation, microstructure evolution, and mechanical properties in silicon nitride with RE₂O₃+MgO additives: RE=La, Gd, and Lu.[J]. Journal of the American Ceramic Society, 2328(2008).

[42] BECHER P F, SHIBATA N, PAINTER G S et al. Observations on the influence of secondary Me oxide additives (Me=Si, Al, Mg) on the microstructural evolution and mechanical behavior of silicon nitride ceramics containing RE₂O₃(RE=La, Gd, Lu)[J]. Journal of the American Ceramic Society, 570(2010).

[43] KITAYAMA M, HIRAO K, WATARI K et al. Thermal conductivity of β-Si₃N₄: III, effect of rare-earth (RE = La, Nd, Gd, Y, Yb, and Sc) oxide additives[J]. Journal of the American Ceramic Society, 353(2001).

[44] YOKOTA H, YAMADA S, IBUKIYAMA M. Effect of large β-Si₃N₄ particles on the thermal conductivity of β-Si₃N₄ ceramics[J]. Journal of the European Ceramic Society, 1175(2003).

[45] YOKOTA H, IBUKIYAMA M. Effect of lattice impurities on the thermal conductivity of β-Si₃N₄[J]. Journal of the European Ceramic Society, 55(2003).

[46] YOKOTA H, ABE H, IBUKIYAMA M. Effect of lattice defects on the thermal conductivity of β-Si₃N₄[J]. Journal of the European Ceramic Society, 1751(2003).

[47] YOKOTA H, IBUKIYAMA M. Effect of the addition of β-Si₃N₄ nuclei on the thermal conductivity of β-Si₃N₄ceramics[J]. Journal of the European Ceramic Society, 1183(2003).

[48] YOKOTA H, IBUKIYAMA M. Microstructure tailoring for high thermal conductivity of β-Si₃N₄ ceramics[J]. Journal of the American Ceramic Society, 197(2003).

[49] NEGITA K. Effective sintering aids for Si₃N₄ ceramics[J]. Journal of Materials Science Letters, 755(1985).

[50] OKAMOTO Y, HIROSAKI N, ANDO M et al. Effect of sintering additive composition on the thermal conductivity of silicon nitride[J]. Journal of Materials Research, 3473(1998).

[51] HIROSAKI N, OKAMOTO Y, MUNAKATA F et al. Effect of seeding on the thermal conductivity of self-reinforced silicon nitride[J]. Journal of the European Ceramic Society, 2183(1999).

[52] HAYASHI H, HIRAO K, TORIYAMA M et al. MgSiN₂ addition as a means of increasing the thermal conductivity of β-silicon nitride[J]. Journal of the American Ceramic Society, 3060(2001).

[53] YE J, OKADA A. Microthermal analysis of heat conduction in silicon nitrides[J]. Journal of the American Ceramic Society, 1365(2003).

[54] ZHU X, ZHOU Y, HIRAO K et al. Processing and thermal conductivity of sintered reaction-bonded silicon nitride. I: effect of Si powder characteristics[J]. Journal of the American Ceramic Society, 3331(2006).

[55] ZHOU Y, ZHU X, HIRAO K et al. Sintered reaction-bonded silicon nitride with high thermal conductivity and high strength[J]. International Journal of Applied Ceramic Technology, 119(2008).

[56] ZHU X W, SAKKA Y, ZHOU Y et al. Effect of MgSiN₂ addition on gas pressure sintering and thermal conductivity of silicon nitride with Y₂O₃[J]. Journal of the Ceramic Society of Japan, 706(2008).

[57] PENG G H, LIANG M, LIANG Z H et al. Spark plasma sintered silicon nitride ceramics with high thermal conductivity using MgSiN₂as additives[J]. Journal of the American Ceramic Society, 2122(2009).

[58] ZHU X, ZHOU Y, HIRAO K et al. Potential use of only Yb₂O₃ in producing dense Si₃N₄ ceramics with high thermal conductivity by gas pressure sintering[J]. Science and Technology of Advanced Materials, 065001(2010).

[59] LEE H M, LEE E B, KIM D L et al. Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si₃N₄ ceramics[J]. Ceramics International, 17466(2016).

[60] LIANG H, ZENG Y, ZUO K et al. Mechanical properties and thermal conductivity of Si₃N₄ ceramics with YF₃ and MgO as sintering additives[J]. Ceramics International, 15679(2016).

[61] KIM J M, KO S I, KIM H N et al. Effects of microstructure and intergranular glassy phases on thermal conductivity of silicon nitride[J]. Ceramics International, 5441(2017).

[62] ZHOU Y, HYUGA H, KUSANO D et al. Effects of yttria and magnesia on densification and thermal conductivity of sintered reaction-bonded silicon nitrides[J]. Journal of the American Ceramic Society, 1579(2019).

[63] LI Y, KIM H N, WU H et al. Enhanced thermal conductivity in Si₃N₄ceramic with the addition of Y₂Si₄N₆C[J]. Journal of the American Ceramic Society, 4128(2018).

[64] YANG C, LIU Q, ZHANG B et al. Effect of MgF₂ addition on mechanical properties and thermal conductivity of silicon nitride ceramics[J]. Ceramics International, 12757(2019).

[65] WANG W, YAO D, CHEN H et al. ZrSi₂-MgO as novel additives for high thermal conductivity of β‐Si₃N₄ ceramics[J]. Journal of the American Ceramic Society, 2090(2019).

[66] DUAN Y, ZHANG J, LI X et al. High thermal conductivity silicon nitride ceramics prepared by pressureless sintering with ternary sintering additives[J]. International Journal of Applied Ceramic Technology, 1399(2019).

[67] LI Y, KIM H N, WU H et al. Enhanced thermal conductivity in Si₃N₄ ceramic by addition of a small amount of carbon[J]. Journal of the European Ceramic Society, 157(2019).

[68] LI Y, KIM H N, WU H et al. Microstructure and thermal conductivity of gas-pressure-sintered Si₃N₄ ceramic: the effects of Y₂O₃ additive content[J]. Journal of the European Ceramic Society, 274(2021).

[69] LIANG H, WANG W, ZUO K et al. Effect of LaB₆ addition on mechanical properties and thermal conductivity of silicon nitride ceramics[J]. Ceramics International, 17776(2020).

[70] LIANG H, WANG W, ZUO K et al. YB₂C₂: a new additive for fabricating Si₃N₄ ceramics with superior mechanical properties and medium thermal conductivity[J]. Ceramics International, 5239(2020).

[71] WANG W, YAO D, LIANG H et al. Effect of the binary nonoxide additives on the densification behavior and thermal conductivity of Si₃N₄ceramics[J]. Journal of the American Ceramic Society, 5891(2020).

[72] WANG W, YAO D, LIANG H et al. Effect of in-situ formed Y₂O₃ by metal hydride reduction reaction on thermal conductivity of β-Si₃N₄ ceramics[J]. Journal of the European Ceramic Society, 5316(2020).

[73] WANG W, YAO D, LIANG H et al. Novel silicothermic reduction method to obtain Si₃N₄ ceramics with enhanced thermal conductivity and fracture toughness[J]. Journal of the European Ceramic Society, 1735(2021).

[74] WU L X, ZHU L L, YOU Y et al. Fabrication and properties of pressure-sintered reaction-bonded Si₃N₄ ceramics with addition of Eu₂O₃-MgO-Y₂O₃[J]. Ceramics International, 935(2021).

[75] WANG W, YAO D, LIANG H et al. Improved thermal conductivity of β-Si₃N₄ ceramics through the modification of the liquid phase by using GdH₂ as a sintering additive[J]. Ceramics International, 5631(2021).

[76] WANG W, YAO D, LIANG H et al. Enhanced thermal conductivity in Si₃N₄ ceramics prepared by using ZrH₂ as an oxygen getter[J]. Journal of Alloys and Compounds, 855: 157451(2021).

[77] WANG W D, CHEN H B, LI S S et al. Preparation of silicon nitride with high thermal conductivity and high flexural strength using YbH₂-MgO as sintering additive[J]. Journal of Inorganic Materials, 959(2021).

[78] HUANG M, HUANG Y, OU J et al. Effect of a new nonoxide additive Y₃Si₂C₂ on the thermal conductivity and mechanical properties of Si₃N₄ ceramics[J]. International Journal of Applied Ceramic Technology, 3403(2022).

[79] FU S, YANG Z C, LI H H et al. Mechanical properties and thermal conductivity of Si₃N₄ ceramics with composite sintering additives[J]. Journal of Inorganic Materials, 947(2022).

[80] FU S, YANG Z, LI H et al. Effects of Gd₂O₃ and MgSiN₂ sintering additives on the thermal conductivity and mechanical properties of Si₃N₄ ceramics[J]. International Journal of Applied Ceramic Technology, 1855(2023).

[81] UCHIDA N, KOIZUMI M, SHIMADA M. Fabrication of Si₃N₄ ceramics with metal nitride additives by isostatic hot-pressing[J]. Journal of the American Ceramic Society(1985).

[82] ABE O. Sintering of silicon-nitride with alkaline-earth nitrides[J]. Ceramics International, 53(1990).

[83] PENG G H, JIANG G J, ZHUANG H R et al. A novel route for preparing MgSiN₂ powder by combustion synthesis[J]. Materials Science and Engineering: A, 65(2005).

[85] YANG J H, QIU J F, LI J T. Preparation of single-phase magnesium silicon nitride powder by a two-step process[J]. Ceramics International, 673(2011).

[86] NAKASHIMA Y, OZEKI Y, ZHOU Y et al. Synthesis of MgSiN₂ under 0.1 MPa of nitrogen pressure via combustion[J]. Ceramics International, 31383(2021).

[87] WANG W, YAO D, LIANG H et al. Improved thermal conductivity of β‐Si₃N₄ ceramics by lowering SiO₂/Y₂O₃ ratio using YH₂ as sintering additive[J]. Journal of the American Ceramic Society, 5567(2020).

[88] LIAO S, ZHOU L, JIANG C et al. Thermal conductivity and mechanical properties of Si₃N₄ ceramics with binary fluoride sintering additives[J]. Journal of the European Ceramic Society, 6971(2021).

[89] LIAO S, ZHUANG Y, WANG J et al. Synergistic effect of binary fluoride sintering additives on the properties of silicon nitride ceramics[J]. Ceramics International, 21832(2022).

[90] KUMAR K, PARK Y J, KIM M J et al. Influence of ternary oxide additives on thermal conductivity of pressureless sintered Si₃N₄[J]. Materials Letters, 328: 133189(2022).

[91] GUO W M, WU L X, MA T et al. Rapid fabrication of Si₃N₄ ceramics by reaction-bonding and pressureless sintering[J]. Journal of the European Ceramic Society, 3919(2016).

[92] LI W, WU Y, HUANG R et al. Effect of Si addition on the mechanical and thermal properties of sintered reaction bonded silicon nitride[J]. Journal of the European Ceramic Society, 4491(2017).

[93] ZHOU Y, HYUGA H, KUSANO D et al. Development of high-thermal-conductivity silicon nitride ceramics[J]. Journal of Asian Ceramic Societies, 221(2015).

[94] NAKASHIMA Y, ZHOU Y, TANABE K et al. Effects of nitridation temperature on properties of sintered reaction‐bonded silicon nitride[J]. International Journal of Applied Ceramic Technology, 1071(2023).

[95] ZHU X, SAKKA Y, ZHOU Y et al. The effect of embedding conditions on the thermal conductivity of β-Si₃N₄[J]. Journal of the Ceramic Society of Japan, 1093(2006).

[96] HU F, ZHU T, XIE Z et al. Elimination of grain boundaries and its effect on the properties of silicon nitride ceramics[J]. Ceramics International, 12606(2020).

[97] HU J, ZHANG B, LI C et al. Fabrication of Si₃N₄ ceramics with high thermal conductivity and flexural strength via novel two-step gas-pressure sintering[J]. Journal of the European Ceramic Society, 4846(2022).

[98] ZHU X, HAYASHI H, ZHOU Y et al. Influence of additive composition on thermal and mechanical properties of β-Si₃N₄ceramics[J]. Journal of Materials Research, 3270(2004).

[99] ZHU X, SAKKA Y, ZHOU Y et al. Processing and properties of sintered reaction-bonded silicon nitride with Y₂O₃-MgSiN₂: effects of Si powder and Li₂O addition[J]. Acta Materialia, 5581(2007).

[100] KUSANO D, ADACHI S, TANABE G et al. Effects of impurity oxygen content in raw Si powder on thermal and mechanical properties of sintered reaction-bonded silicon nitrides[J]. International Journal of Applied Ceramic Technology, 229(2012).

[101] KUSANO D, HYUGA H, ZHOU Y et al. Effect of aluminum content on mechanical properties and thermal conductivities of sintered reaction-bonded silicon nitride[J]. International Journal of Applied Ceramic Technology, 534(2014).

[102] LI S, CHEN H, WANG W et al. Effects of Y₂O₃/MgO ratio on mechanical properties and thermal conductivity of silicon nitride ceramics[J]. International Journal of Applied Ceramic Technology, 2873(2022).

[103] LI S, XIA Y, YAO D et al. Enhanced thermal conductivity and flexural strength of sintered reaction-bonded silicon nitride with addition of (Y_0.96Eu_0.04)₂O₃[J]. International Journal of Applied Ceramic Technology, 465(2023).

[104] DUAN Y, ZHANG J, LI X et al. Low temperature pressureless sintering of silicon nitride ceramics for circuit substrates in powder electronic devices[J]. Ceramics International, 4375(2018).

[105] LIU W, TONG W, LU X et al. Effects of different types of rare earth oxide additives on the properties of silicon nitride ceramic substrates[J]. Ceramics International, 12436(2019).

[107] YANG L, DITTA A, FENG B et al. Study of the comparative effect of sintering methods and sintering additives on the microstructure and performance of Si₃N₄ ceramic[J]. Materials, 2142(2019).

[108] ZHANG J, CUI W, LI F et al. Effects of MgSiN₂ addition and post-annealing on mechanical and thermal properties of Si₃N₄ ceramics[J]. Ceramics International, 15719(2020).

[109] DUAN Y, LIU N, ZHANG J et al. Cost effective preparation of Si₃N₄ ceramics with improved thermal conductivity and mechanical properties[J]. Journal of the European Ceramic Society, 298(2020).

[110] OH H M, LEE H K. Controlling the width of particle size distribution of Si powder and properties of sintered reaction- bonded silicon nitride (SRBSN) ceramics with high thermal conductivity[J]. Ceramics International, 12517(2020).

[111] YE C, LIU Y, WANG C et al. Investigation on thermal conductivity and mechanical properties of Si₃N₄ ceramics via one-step sintering[J]. Ceramics International, 33353(2021).

[112] HU F, ZHU T, XIE Z et al. Effect of composite sintering additives containing non-oxide on mechanical, thermal and dielectric properties of silicon nitride ceramics substrate[J]. Ceramics International, 13635(2021).

[113] DOW H S, NA M, JUNG Y W et al. Effect of oxygen impurity on thermal conduction rate of polycrystalline Si₃N₄[J]. Advanced Engineering Materials, 2170037(2021).

[114] JIANG C, ZHUANG Y, WANG J et al. Preparation, microstructure, and properties of GPS silicon nitride ceramics with β-Si₃N₄ seeds and nanophase additives[J]. International Journal of Applied Ceramic Technology, 2533(2022).

[115] WANG Y, TIAN J, WU H et al. Thermal and mechanical properties of Si₃N₄ ceramics obtained via two-step sintering[J]. Ceramics International, 18294(2022).

[116] IMAMURA H, KAWATA T, HONDA S et al. A facile method to produce rodlike β-Si₃N₄ seed crystallites for bimodal structure controlling[J]. Journal of the American Ceramic Society, 1694(2023).

[117] NAKASHIMA Y, ZHOU Y, TANABE K et al. Effect of microstructures on dielectric breakdown strength of sintered reaction-bonded silicon nitride ceramics[J]. Journal of the American Ceramic Society, 1139(2023).

[118] MIYAZAKI H, ZHOU Y, IWAKIRI S et al. Improved resistance to thermal fatigue of active metal brazing substrates for silicon carbide power modules using tough silicon nitrides with high thermal conductivity[J]. Ceramics International, 8870(2018).

[119] ZHOU Y, OHJI T, HYUGA H et al. Fracture resistance behavior of high-thermal-conductivity silicon nitride ceramics[J]. International Journal of Applied Ceramic Technology, 872(2014).

[120] MIYAZAKI H, YOSHIZAWA Y I, HIRAO K et al. Evaluation of fracture toughness of ceramic thin plates through modified single edge-precracked plate method[J]. Scripta Materialia, 103: 34(2015).