[1] Cole B, Daniel A. Applying graded material transitions with low-cost additive manufacturing[J]. Rapid Prototyping Journal, 29, 378-392(2023).

[2] Yang K, Rometsch P, Davies C H J et al. Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting[J]. Materials & Design, 154, 275-290(2018).

[3] Yuan R, Deng S J, Cui H C et al. Interface characterization and mechanical properties of dual beam laser welding-brazing Al/steel dissimilar metals[J]. Journal of Manufacturing Processes, 40, 37-45(2019).

[4] Luo B B, Zhang H, Lei M et al. Laser welded joints of automotive 6016 aluminum and low carbon steel: interface microstructure and mechanical properties[J]. Materials Reports, 34, 4108-4112(2020).

[5] Mei L F, Chen G Y, Jin X Z et al. Study on fiber laser overlap-welding of automobile aluminum alloy[J]. Chinese Journal of Lasers, 37, 2091-2097(2010).

[6] Hong K M, Shin Y C. Prospects of laser welding technology in the automotive industry: a review[J]. Journal of Materials Processing Technology, 245, 46-69(2017).

[7] Huang Y, Huang J, Nie P L. Microstructures and textures of 6016 and 5182 aluminum laser welded joints[J]. Chinese Journal of Lasers, 46, 0402003(2019).

[8] Wang Z H, Lin X, Kang N et al. Laser powder bed fusion of high-strength Sc/Zr-modified Al-Mg alloy: phase selection, microstructural/mechanical heterogeneity, and tensile deformation behavior[J]. Journal of Materials Science & Technology, 95, 40-56(2021).

[9] Wang Z H, Lin X, Tang Y et al. Laser-based directed energy deposition of novel Sc/Zr-modified Al-Mg alloys: columnar-to-equiaxed transition and aging hardening behavior[J]. Journal of Materials Science & Technology, 69, 168-179(2021).

[10] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[11] Qin Y L, Sun B H, Zhang H et al. Development of selective laser melted aluminum alloys and aluminum matrix composites in aerospace field[J]. Chinese Journal of Lasers, 48, 1402002(2021).

[12] Yang X M, Jian H G, Zhang W et al. Research on characteristics of AlSi10Mg aluminum powder in the selective laser melting[J]. New Technology & New Process, 57-63(2021).

[13] Liu Z Q, Zhao J P, Liu C J. Research status of bifocal laser welding of high strength aluminum alloy[J]. Hot Working Technology, 50, 6-11(2021).

[14] Zhang Z H, Dong S Y, Wang Y J et al. Microstructure and properties of fiber laser welded 7A52 Al alloy joints[J]. Applied Laser, 34, 567-571(2014).

[15] Xu Y L, Li C R, Li J Y et al. Influence of process parameters on microstructure and properties of 6061-T6 aluminum alloy laser welded joint[J]. Hot Working Technology, 52, 26-31(2023).

[16] Zou J, Liu H J, Zhao Y H et al. Study on process parameters for preparing a high-strength Al-Mg-Sc-Zr alloy by laser melting deposition[J]. Laser & Optoelectronics Progress, 60, 0914003(2023).

[17] Ahmed T, Joao S, Jamil K et al. Improvements in the microstructure and mechanical properties of aluminium alloys using ultrasonic-assisted laser welding[J]. Metals, 12, 1041(2022).

[18] Zhao Y H, He C, Zou J et al. Effect of external field on microstructure and properties of Al-Mg-Sc-Zr alloy prepared by laser melting deposition[J]. Acta Optica Sinica, 43, 0214002(2023).

[19] Sherepenko O, Mohamadizadeh A, Zvorykina A et al. Determination of resistance spot weld failure path in ultra-high-strength press-hardened steel by control of fusion boundary transient softening[J]. Journal of Materials Science, 56, 14287-14297(2021).

[20] Yin S K, Wang Y S, Li F H. Behavior and effect factors of hydrogen diffusion in weld[J]. Journal of Iron and Steel Research, 25, 39-43(2013).

[21] Kong X F, Zou Y, Zhang J et al. Review of formation and controlling for diffusible hydrogen in steel weldments[J]. Iron & Steel, 50, 77-84(2015).

[22] Chicos L A, Zaharia S M, Cempura G et al. Effect of concentrated solar energy on microstructure evolution of selective laser melted Ti-6Al-4V alloy[J]. The International Journal of Advanced Manufacturing Technology, 118, 3183-3207(2022).

[23] Cai C, Xie J, Liu Z J et al. Welding characteristics and porosity control of weaving laser-MIG hybrid welding of aluminum alloys[J]. Chinese Journal of Lasers, 48, 17-26(2021).

[24] Fan Z Z, Xiong Y C, Lu Z et al. Effect of vacuum dehydrogenation on welding microstructure and mechanical properties of ZL114A alloy modified by strontium[J]. Rare Metal Materials and Engineering, 48, 1802002(2019).

[25] Huang H F, Jiang F, Liu X T et al. Effects of Al3(Sc, Zr) particles and shear bands on recrystallization and fracture behaviors of Al-Mg-Sc-Zr alloy[J]. The Chinese Journal of Nonferrous Metals, 25, 1117-1127(2015).

[26] Rosalbino F, Delsante S, Borzone G et al. Assessing the corrosion resistance of binary Al-Sc alloys in chloride-containing environment[J]. Materials and Corrosion, 68, 444-449(2017).

[27] Riva S, Yusenko K V, Lavery N P et al. The scandium effect in multicomponent alloys[J]. International Materials Reviews, 61, 203-228(2016).

[28] Xu Z, Zhang Z W, Lu Y J et al. Nondestructive testing of microstructure and properties of aluminum alloy based on laser ultrasound[J/OL]. Laser Journal, 1-8. http://kns.cnki.net/kcms/detail/50.1085.TN.20230517.1752.022.html

[29] Tang H, Geng Y X, Gao C F et al. Microstructure evolution and mechanical properties of high-performance Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion[J/OL]. Transactions of Nonferrous Metals Society of China, 1-25. http://kns.cnki.net/kcms/detail/43.1239.tg.20230727.1547.006.html

[30] Wang J E, Gao Y, You Z M et al. The effect of ultrasonic cleaning on the secondary electron yield, surface topography, and surface chemistry of laser treated aluminum alloy[J]. Materials, 13, 296(2020).