[1] [1] Yu Kun, Li Wenxian, Wang Richu, et al. Research, development and application of wrought magnesium alloys[J]. The Chinese Journal of Nonferrous Metals, 2003, 13(2): 277-288.

[2] [2] He Huanju, Zhang Lingfeng, Yang Genmei, et al. Friction and wear properties of AZ31 magnesium alloy by laser shock peening[J]. Chinese J Lasers, 2015, 42(9): 0906003.

[3] [3] Li Quan, Peng Jian, Jiang Xianquan, et al. Effect of Ce and homogeneous annealing on microstructure and deformation performance of Mg-2.0Zn-1.0Mn alloy[J]. Journal of Functional Materials, 2014(S2): 64-67.

[4] [4] Qi F G, Zhang D F, Zhang X H, et al. Effect of Y addition on microstructure and mechanical properties of Mg-Zn-Mn alloy[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(5): 1352-1364.

[5] [5] Wang Menghan, Xian Guocai, Wang Yanli. Effect of annealing process on microstructure and wear resistance of AZ31 magnesium alloy[J]. Heat Treatment of Metals, 2014, 39(2): 123-124.

[6] [6] Zhang W W, Yao Y L, Noyan I C. Microscale laser shock peening of thin films, part 1: Experiment, modeling and simulation[J]. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 2004, 126(1): 10-17.

[7] [7] Wang Shengbo, Fan Yong, Wu Hongxing, et al. Research of strengthening 7050 aerial aluminum alloy structural material with laser shock processing[J]. Chinese J Lasers, 2004, 31(1): 125-128.

[9] [9] Wang Jiangtao, Zhang Yongkang, Chen Jufang, et al. Effect of laser shock processing on electrochemical corrosion behavior of 7075 aluminum alloy plasma arc weldments[J]. Chinese J Lasers, 2015, 42(12): 1203006.

[10] [10] Trdan U, Skarba M, Grum J. Laser shock peening effect on the dislocation transitions and grain refinement of Al-Mg-Si alloy[J]. Materials Characterization, 2014, 97: 57-68.

[11] [11] Qiao Hongchao, Zhao Yixiang, Zhao Jibin, et al. Effect of laser peening on microstructures and properties of TiAl alloy[J]. Optics and Precison Engineering, 2014, 22(7): 1766-1773.

[12] [12] Zhang Qinglai, Shao Wei, Zhang Bingxin, et al. Effect of laser shock processing on microstructures and mechanical properties of AZ31 and AZ80D-T6 magnesium alloys[J]. The Chinese Journal of Nonferrous Metals, 2015, 25(10): 2680-2687.

[13] [13] Zhang Qinglai, Wang Rong, Zhang Bingxin, et al. Effect of laser shock processing on mechanical properties and mesostructures of AZ31 magnesium alloy[J]. Chinese J Lasers, 2015, 42(3): 0303001.

[14] [14] Zhong Jinshan, Lu Jinzhong, Luo Kaiyu, et al. Influence of laser shock processing on tensile properties and tribological behaviors of AISI304 stainless steel[J]. Chinese J Lasers, 2013, 40(5): 0503002.

[15] [15] Trdan U, Grum J. SEM/EDS characterization of laser shock peening effect on localized corrosion of Al alloy in a near natural chloride environment[J]. Corrosion Science, 2014, 82: 328-338.

[16] [16] Zhang Yongkang, Zhang Bin, Yu Chengye, et al. Fatigue life improvement of aero Al-alloy by laser shocking[J]. Aeronautical Manufacturing Technology, 1994(3): 17-19.

[17] [17] Li Yuqin, Wang Xuede, Yang Zhufang, et al. Wear resistance of copper improved by laser shock peening[J]. High Power Laser and Particle Beams, 2016, 28(2): 029002.

[18] [18] Fabbro R, Fournier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 1990, 68(2): 775-784.

[19] [19] Zhang Y S, Han Z, Wang K, et al. Friction and wear behaviors of nanocrystalline surface layer of pure copper[J]. Wear, 2006, 260(9-10): 942-948.