[1] [1] Chen C, Feng J, Li J, Guo Y, Shi X, Peng H. Functional fiber materials to smart fiber devices. Chem Rev. 2022;123:613–62.10.1021/acs.chemrev.2c00192

[2] [2] Lin M, Hu H, Zhou S, Xu S. Soft wearable devices for deep-tissue sensing. Nat Rev Mater. 2022;7:850–69.10.1038/s41578-022-00427-y

[3] [3] Zhao D, Zhu Y, Cheng W, Chen W, Wu Y, Yu H. Cellulose-based flexible functional materials for emerging intelligent electronics. Adv Mater. 2021;33: e2000619.10.1002/adma.202000619

[4] [4] Owens CE, Headrick RJ, Williams SM, Fike AJ, Pasquali M, McKinley GH, Hart AJ. Substrate-versatile direct-write printing of carbon nanotube-based flexible conductors, circuits, and sensors. Adv Func Mater. 2021;31:2100245.10.1002/adfm.202100245

[5] [5] Qiao L, Du K. Scalable production of high-quality carbon nanotube dispersion in aqueous solution using cellulose as dispersant by a freezing/thawing process. J Colloid Interface Sci. 2022;623:1200–9.10.1016/j.jcis.2022.05.041

[6] [6] Zhang S, Hua C, He B, Chang P, Du M, Liu Y. High-conductivity, stable Ag/cellulose paper prepared via in situ reduction of fractal-structured silver particles. Carbohydr Polym. 2021;262: 117923.10.1016/j.carbpol.2021.117923

[7] [7] Kinloch IA, Suhr J, Lou J, Young RJ, Ajayan PM. Composites with carbon nanotubes and graphene. An outlook. Science. 2018;362:547–53.10.1126/science.aat7439

[8] [8] Rivadeneyra A, Marín-Sánchez A, Wicklein B, Salmerón JF, Castillo E, Bobinger M, Salinas-Castillo A. Cellulose nanofibers as substrate for flexible and biodegradable moisture sensors. Compos Sci Technol. 2021;208: 108738.10.1016/j.compscitech.2021.108738

[9] [9] Alam MN, Kumar V, Lee D-J, Choi J. Synergistically toughened silicone rubber nanocomposites using carbon nanotubes and molybdenum disulfide for stretchable strain sensors. Compos Part B-Eng. 2023;259: 110759.10.1016/j.compositesb.2023.110759

[10] [10] Xu T, Du H, Liu H, Liu W, Zhang X, Si C, Liu P, Zhang K. Advanced nanocellulose-based composites for flexible functional energy storage devices. Adv Mater. 2021;33:2101368.10.1002/adma.202101368

[11] [11] Lyu S, Chang H, Zhang L, Wang S, Li S, Lu Y, Li S. High specific surface area MXene/SWCNT/cellulose nanofiber aerogel film as an electrode for flexible supercapacitors. Compos Part B-Eng. 2023;264: 110888.10.1016/j.compositesb.2023.110888

[12] [12] Zhao D, Liu R, Luo C, Guo Y, Hou C, Zhang Q, Li Y, Jia W, Wang H. Dielectrophoretic assembly of carbon nanotube chains in aqueous solution. Adv Fiber Mater. 2021;3:312.10.1007/s42765-021-00084-w

[13] [13] Gao C, Guo M, Liu Y, Zhang D, Gao F, Sun L, Li J, Chen X, Terrones M, Wang Y. Surface modification methods and mechanisms in carbon nanotubes dispersion. Carbon. 2023;212: 118113.10.1016/j.carbon.2023.118133

[14] [14] Miyashiro D, Hamano R, Umemura K. A review of applications using mixed materials of cellulose, nanocellulose and carbon nanotubes. Nanomaterials (Basel). 2020;10:186.10.3390/nano10020186

[15] [15] Yoon H, Thompson R, Hwang B. Dispersibility study of carbon nanotubes using multiple light scattering: a mini-review. J Colloid Interface Sci. 2023;52: 100686.10.1016/j.colcom.2022.100686

[16] [16] Rennhofer H, Zanghellini B. Dispersion state and damage of carbon nanotubes and carbon nanofibers by ultrasonic dispersion: a review. Nanomaterials (Basel). 2021;11:1469.10.3390/nano11061469

[17] [17] Oh S-H, Altug H, Jin X, Low T, Koester SJ, Ivanov AP, Edel JB, Avouris P, Strano MS. Nanophotonic biosensors harnessing van der Waals materials. Nat Commun. 2021;12:3824.10.1038/s41467-021-23564-4

[18] [18] Karousis N, Tagmatarchis N, Tasis D. Current progress on the chemical modification of carbon nanotubes. Chem Rev. 2010;110:5366–97.10.1021/cr100018g

[19] [19] Xu S, Zhang Y, Zhu Y, Wu J, Li K, Lin G, Li X, Liu R, Liu X, Wong C-P. Facile one-step fabrication of glucose oxidase loaded polymeric nanoparticles decorating MWCNTs for constructing glucose biosensing platform: structure matters. Biosens Bioelectron. 2019;135:153–9.10.1016/j.bios.2019.04.017

[20] [20] Zhang D, Song W, Lv L, Gao C, Gao F, Guo H, Diao R, Dai W, Niu J, Chen X, Wei J, Terrones M, Wang Y. Mono-dispersion decorated ultra-long single-walled carbon nanotube/aramid nanofiber for high-strength electromagnetic interference shielding film with Joule heating properties. Carbon. 2023;214: 118315.10.1016/j.carbon.2023.118315

[21] [21] Liu L, Chang D, Gao C. A review of multifunctional nanocomposite fibers: design, preparation and applications. Adv Fiber Mater. 2023;3:1–38.

[22] [22] Hajian A, Lindstrom SB, Pettersson T, Hamedi MM, Wagberg L. Understanding the dispersive action of nanocellulose for carbon nanomaterials. Nano Lett. 2017;17:1439–47.10.1021/acs.nanolett.6b04405

[23] [23] Zeng Z, Wang C, Wu T, Han D, Luković M, Pan F, Siqueira G, Nyström G. Nanocellulose assisted preparation of ambient dried, large-scale and mechanically robust carbon nanotube foams for electromagnetic interference shielding. J Mater Chem A. 2020;8:17969–79.10.1039/D0TA05961G

[24] [24] Thakur A, Devi P. Paper-based flexible devices for energy harvesting, conversion and storage applications: a review. Nano Energy. 2022;94: 106927.10.1016/j.nanoen.2022.106927

[25] [25] Feng X, Wang X, Zhang C, Dang C, Chen Y, Qi H. Highly conductive and multifunctional nanocomposites based on sulfated nanocellulose-assisted high dispersion limit of single-walled carbon nanotubes. Carbon. 2021;183:187–95.10.1016/j.carbon.2021.07.022

[26] [26] De France K, Zeng Z, Wu T, Nystrom G. Functional materials from nanocellulose: utilizing structure-property relationships in bottom-up fabrication. Adv Mater. 2021;33: e2000657.10.1002/adma.202000657

[27] [27] Li Y, Zhu H, Wang Y, Ray U, Zhu S, Dai J, Chen C, Fu K, Jang SH, Henderson D, Li T, Hu L. Cellulose-nanofiber-enabled 3D printing of a carbon-nanotube microfiber network. Small Methods. 2017;1:1700222.10.1002/smtd.201700222

[28] [28] Liu Y, Zhang S, Lin R, Li L, Li M, Du M, Tang R. Potassium permanganate oxidation as a carboxylation and defibrillation method for extracting cellulose nanofibrils to fabricate films with high transmittance and haze. Green Chem. 2021;23:8069–78.10.1039/D1GC02657G

[29] [29] Liu Y, Zhang S, Li L, Coseri S. Cellulose nanofiber extraction from unbleached kraft pulp for paper strengthening. Cellulose. 2023;3:3219–35.10.1007/s10570-022-05008-4

[30] [30] Humphrey W, Dalke A, Schulten K. VMD: visual molecular dynamics. J Mol Graph Model. 1996;14:33–8.10.1016/0263-7855(96)00018-5

[31] [31] Daicho K, Saito T, Fujisawa S, Isogai A. Crystallinity of nanocellulose: dispersion-induced disordering of the grain boundary in biologically structured cellulose. ACS Appl Nano Mater. 2018;1:5774–85.10.1021/acsanm.8b01438

[32] [32] Van Der Spoel D, Lindahl E, Hess B, Groenhof G, Mark AE, Berendsen HJC. GROMACS: Fast, flexible, and free. J Comput Chem. 2005;26:1701–18.10.1002/jcc.20291

[33] [33] Essmann U, Perera L, Berkowitz ML, Darden T, Lee H, Pedersen LG. A smooth particle mesh Ewald method. J Chem Phys. 1995;103:8577–93.10.1063/1.470117

[34] [34] Kirschner KN, Yongye AB, Tschampel SM, González-Outeiriño J, Daniels CR, Foley BL, Woods RJ. GLYCAM06: a generalizable biomolecular force field. J Comput Chem. 2008;29:622–55.10.1002/jcc.20820

[35] [35] Wang J, Wolf RM, Caldwell JW, Kollman PA, Case DA. Development and testing of a general amber force field. J Comput Chem. 2004;25:1157–74.10.1002/jcc.20035

[36] [36] Jorgensen WL. Monte Carlo simulation of n-butane in water. Conformational evidence for the hydrophobic effect. J Chem Phys. 1982;77:5757–65.10.1063/1.443732

[37] [37] Caddeo C, Pucci L, Gabriele M, Carbone C, Fernandez-Busquets X, Valenti D, Pons R, Vassallo A, Fadda AM, Manconi M. Stability, biocompatibility and antioxidant activity of PEG-modified liposomes containing resveratrol. Int J Pharm. 2018;538:40–7.10.1016/j.ijpharm.2017.12.047

[38] [38] Abo-Hamad A, Hayyan M, AlSaadi MA, Mirghani MES, Hashim MA. Functionalization of carbon nanotubes using eutectic mixtures: a promising route for enhanced aqueous dispersibility and electrochemical activity. Chem Eng J. 2017;311:326–39.10.1016/j.cej.2016.11.108

[39] [39] Bratko D, Jönsson B, Wennerström H. Electrical double layer interactions with image charges. Chem Phys Lett. 1986;168:449–54.10.1016/0009-2614(86)80652-2

[40] [40] Fujisawa S, Okita Y, Fukuzumi H, Saito T, Isogai A. Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups. Carbohydr Polym. 2011;84:579–83.10.1016/j.carbpol.2010.12.029

[41] [41] Li C, Guo J, Jiang T, Zhang X, Xia L, Wu H, Guo S, Zhang X. Extensional flow-induced hybrid crystalline fibrils (shish) in CNT/PLA nanocomposite. Carbon. 2018;129:720–9.10.1016/j.carbon.2017.12.063

[42] [42] Singh D, Rawal A. Tensile mechanics of buckypaper: bridging the disconnect between disordered structure and carbon nanotube properties. Carbon. 2022;190:299–311.10.1016/j.carbon.2022.01.004

[43] [43] Zhu P, Kuang Y, Wei Y, Li F, Ou H, Jiang F, Chen G. Electrostatic self-assembly enabled flexible paper-based humidity sensor with high sensitivity and superior durability. Chem Eng J. 2021;404: 127105.10.1016/j.cej.2020.127105

[44] [44] Fang D, Zhou J, Sheng L, Tang W, Tang J. Juglone bonded carbon nanotubes interweaving cellulose nanofibers as self-standing membrane electrodes for flexible high energy supercapacitors. Chem Eng J. 2020;396: 125325.10.1016/j.cej.2020.125325

[45] [45] Huang H-D, Liu C-Y, Zhang L-Q, Zhong G-J, Li Z-M. Simultaneous reinforcement and toughening of carbon nanotube/cellulose conductive nanocomposite films by interfacial hydrogen bonding. ACS Sustain Chem Eng. 2015;3:317–24.10.1021/sc500681v

[46] [46] Lin F, Wang Z, Chen J, Lu B, Tang L, Chen X, Lin C, Huang B, Zeng H, Chen Y. A bioinspired hydrogen bond crosslink strategy toward toughening ultrastrong and multifunctional nanocomposite hydrogels. J Mater Chem B. 2020;8:4002–15.10.1039/D0TB00424C

[47] [47] Sun Z, Zheng B, Chen C, Dong Z, Ma P. Synergistically enhancing weavability and interface behavior by applying PDMS/MXene on carbon fiber surface through ultrasound assistance. Compos Part B Eng. 2023;267: 111071.10.1016/j.compositesb.2023.111071

[48] [48] Huang YY, Terentjev EM. Dispersion of carbon nanotubes: mixing, sonication, stabilization, and composite properties. Polymers. 2012;4:275–95.10.3390/polym4010275

[49] [49] Batista CA, Larson RG, Kotov NA. Nonadditivity of nanoparticle interactions. Science. 2015;350:1242477.10.1126/science.1242477

[50] [50] Fukui T, Garcia-Hernandez JD, MacFarlane LR, Lei S, Whittell GR, Manners I. Seeded self-assembly of charge-terminated poly(3-hexylthiophene) amphiphiles based on the energy landscape. J Am Chem Soc. 2020;142:15038–48.10.1021/jacs.0c06185

[51] [51] Li C, Lan C, Guo M, Wang N, Ma Y. Wicking-driven evaporation self-assembly of carbon nanotubes on fabrics: generating controlled orientational structures. Langmuir. 2020;36:13963–70.10.1021/acs.langmuir.0c02436

[52] [52] Pritchard CQ, Funk G, Owens J, Stutz S, Gooneie A, Sapkota J, et al. Adjustable film properties of cellulose nanofiber and cellulose nanocrystal composites. Carbohydr Polym. 2022;286: 119283.10.1016/j.carbpol.2022.119283

[53] [53] Guan QF, Han ZM, Yang KP, Yang HB, Ling ZC, Yin CH, Yu SH. Sustainable double-network structural materials for electromagnetic shielding. Nano Lett. 2021;21:2532–7.10.1021/acs.nanolett.0c05081

[54] [54] Goetz LA, Naseri N, Nair SS, Karim Z, Mathew AP. All cellulose electrospun water purification membranes nanotextured using cellulose nanocrystals. Cellulose. 2018;25:3011–23.10.1007/s10570-018-1751-1

[55] [55] Gu X, Fan Q, Yang F, Cai L, Zhang N, Zhou W, Zhou W, Xie S. Hydro-actuation of hybrid carbon nanotube yarn muscles. Nanoscale. 2016;8:17881–6.10.1039/C6NR06185K

[56] [56] Dai S, Chu Y, Liu D, Cao F, Wu X, Zhou J, Zhou B, Chen Y, Huang J. Intrinsically ionic conductive cellulose nanopapers applied as all solid dielectrics for low voltage organic transistors. Nat Commun. 2018;9:2737.10.1038/s41467-018-05155-y

[57] [57] Liu Y, Zhang S, Hua C, Li N, Li L. Silver-based conductive films on the filter paper template with the interfacial aid of PEI. Cellulose. 2023;30:509–24.10.1007/s10570-022-04887-x

[58] [58] Cui Y, He X, Liu W, Zhu S, Zhou M, Wang Q. Highly stretchable, sensitive, and multifunctional thermoelectric fabric for synergistic-sensing systems of human signal monitoring. Adv Fiber Mater. 2023;13:1–11.

[59] [59] Wang L, Zhang M, Yang B, Ding X, Tan J, Song S, Nie J. Flexible, robust, and durable aramid fiber/CNT composite paper as a multifunctional sensor for wearable applications. ACS Appl Mater Inter. 2021;13:5486–97.10.1021/acsami.0c18161

[60] [60] Wang Q, Sheng H, Lv Y, Liang J, Liu Y, Li N, Xie E, Su Q, Ershad F, Lan W, Wang J, Yu C. A skin-mountable hyperthermia patch based on metal nanofiber network with high transparency and low resistivity toward subcutaneous tumor treatment. Adv Funct Mater. 2022;32:2111228.10.1002/adfm.202111228

[61] [61] Ji F, Sun Z, Hang T, Zheng J, Li X, Duan G, Zhang C, Chen Y. Flexible piezoresistive pressure sensors based on nanocellulose aerogels for human motion monitoring: a review. Compos Commun. 2022;35: 101351.10.1016/j.coco.2022.101351

[62] [62] Kang YJ, Arafa HM, Yoo JY, Kantarcigil C, Kim JT, Jeong H, Yoo S, Oh S, Kim J, Wu C, Tzavelis A, Wu Y, Kwon K, Winograd J, Xu S, Martin-Harris B, Rogers JA. Soft skin-interfaced mechano-acoustic sensors for real-time monitoring and patient feedback on respiratory and swallowing biomechanics. NPJ Digit Med. 2022;5:147.10.1038/s41746-022-00691-w

[63] [63] Huang J, Li D, Zhao M, Ke H, Mensah A, Lv P, Tian X, Wei Q. Flexible electrically conductive biomass-based aerogels for piezoresistive pressure/strain sensors. Chem Eng J. 2019;373:1357–66.10.1016/j.cej.2019.05.136

[64] [64] Fu Y, Zhao S, Wang L, Zhu R. A Wearable sensor using structured silver-particle reinforced PDMS for radial arterial pulse wave monitoring. Adv Healthc Mater. 2019;8: e1900633.10.1002/adhm.201900633