[1] Xu J J, Jiang M, Xiong C et al. Research progress of Al-Li alloys and its forming technology for aeronautic and astronautic industry[J]. Hot Working Technology, 48, 11-16(2019).

[2] Chen A T. Study on microstructure and mechanical behavior of cast Al-Li-Cu-Mn alloys[D](2017).

[3] Gupta R K, Nayan N, Nagasireesha G et al. Development and characterization of Al-Li alloys[J]. Materials Science and Engineering: A, 420, 228-234(2006). http://www.sciencedirect.com/science/article/pii/S0921509306001237

[4] Xu F, Chen L, Lu W et al. Effect of heat input on weld appearance for fiber laser welding 6A02 aluminum alloy[J]. Transactions of the China Welding Institution, 38, 119-123, 134(2017).

[5] Chang Y F, Lei Z, Wang X Y et al. Characteristic of laser-MIG hybrid welding with filling additional cold wire for aluminum alloy[J]. China Welding, 27, 35-41(2018).

[6] Yang W X, Zhang X Y, Xiao R S et al. Dual-beam laser welding of T-joint of aluminum-lithium alloy 2060-T8/2099-T83[J]. Chinese Journal of Lasers, 40, 0703001(2013).

[7] Xia L, Kang Y, Yu H S et al. Equiaxed grains in laser welded 2060 Al-Li alloys and their formation mechanism[J]. Chinese Journal of Lasers, 45, 1102013(2018).

[8] Han X H, Li S Z, Mao Z D et al. Laser-arc hybrid welding process and joint performances of 6106-T6 aluminum alloy profiles for high speed trains[J]. Chinese Journal of Lasers, 46, 1202004(2019).

[9] Li H[M]. Welding processes, 279-285(2010).

[10] Cui L, Li X Y, He D Y et al. Effect of Nd∶YAG laser welding on microstructure and hardness of an Al-Li based alloy[J]. Materials Characterization, 71, 95-102(2012). http://www.sciencedirect.com/science/article/pii/S1044580312001738

[11] Wen P, Li Z X, Zhang S et al. Investigation on porosity, microstructures and performances of 6A01-T5 aluminum alloy joint by oscillating fiber laser-CMT hybrid welding[J]. Chinese Journal of Lasers, 47, 0802003(2020).

[12] Liu T, Zhan X H, Zhao Y Q et al. Study on 2219 aluminum alloy T-joint during dual laser-beam bilateral synchronous welding: effect of the welding speed and incident beam angle on grain morphology[J]. Optics & Laser Technology, 119, 105594(2019). http://www.sciencedirect.com/science/article/pii/S0030399219307571

[13] Huang Y, Huang J, Nie P L et al. Microstructures and textures of 6016 and 5182 aluminum laser welded joints[J]. Chinese Journal of Lasers, 46, 0402003(2019).

[14] Zhan X H, Chen J C, Liu J J et al. Microstructure and magnesium burning loss behavior of AA6061 electron beam welding joints[J]. Materials & Design, 99, 449-458(2016). http://www.sciencedirect.com/science/article/pii/S0264127516303331

[15] Li Z X, Wen P, Zhang S et al. Effects of Nb micro-alloying on microstructure and mechanical properties of A7204P-T4 aluminum alloy joint by fiber laser-CMT hybrid welding[J]. Chinese Journal of Lasers, 47, 0902001(2020).

[16] Li F Q, Feng S, Li M W et al. Softening phenomenon of heat-affected zone in laser welding of 6082 Al alloys with filler wire[J]. Chinese Journal of Lasers, 45, 1102007(2018).

[17] Xia L. Study on the morphology and formation mechanism of microstructures in Al-Li alloy laser welded joints[D](2019).