[1] ZHANG S Y, LI H J, LI K Z et al. Interlayer crack extension mode in laminated carbon/carbon composites[J]. Journal of Inorganic Materials, 91(2002).

[2] CHOI SR, KOWALIK RW. Interlaminar crack growth resistances of various ceramic matrix composites in mode I and mode II loading[J]. Journal Engineer Gas Turbines Power, 130: 031301(2008).

[4] OJARD G, BARNETT T, DAHLEN M et al. Mode I interlaminar fracture toughness testing of a ceramic matrix composite[conf-proc]. The 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC), Daytona Beach, Florida.

[7] KRAUSE T, TUSHTEV K, KOCH D et al. Interlaminar mode I crack growth energy release rate of carbon/carbon composites[J]. Engineering Fracture Mechanics, 100: 38(2013).

[8] HOFMAN S. Mode I delamination onset in carbon fiber reinforced SiC: double cantilever beam testing and cohesive zone modelling[J]. Engineering Fracture Mechanics, 182: 506(2017).

[9] KUMAR R S. Crack-growth resistance behavior of mode-I delamination in ceramic matrix composites[J]. Acta Materialia, 131: 511(2017).

[10] JIANG T, GUAN Z, LI Z et al. Experimental and numerical study on mode I interlaminar fracture toughness of lightly stitched ceramic-matrix composites[J]. Results in Physics, 19: 1(2020).

[11] KUMAR R S. Effects of randomly distributed defects on Mode-I interlaminar fracture of composite materials[J]. Engineering Fracture Mechanics, 248: 107699(2021).

[12] XU W, DING J, GE J et al. Determination of mode I interlaminar fracture toughness of C/SiC composite using taped double cantilever beam and J integral[J]. Journal of Applied Mechanics, 024501(2022).

[13] MANSOUR R, MORSCHER G N. Mode I interlaminar fracture behavior of 2D woven ceramic matrix composites[J]. International Journal of Applied Ceramic Technology, 735(2019).

[14] MAY M. Measuring the rate-dependent mode I fracture toughness of composites-a review[J]. Composites Part A: Applied Science and Manufacturing, 81: 1(2016).

[15] MANSOUR R, KANNAN M, MORSCHER G N et al[conf-proc].

[16] MANSOUR R, SINGH Y P, KANNAN M et al. Study of interlaminar fracture properties of ceramic matrix composites at room and elevated temperatures. Turbo Expo: Power for Land[J]. Sea, and Air. American Society of Mechanical Engineers(2017).

[17] SINGH Y P, MANSOUR R, MORSCHER G N. Combined acoustic emission and multiple lead potential drop measurements in detailed examination of crack initiation and growth during interlaminar testing of ceramic matrix composites[J]. Composites Part A: Applied Science and Manufacturing, 97: 93(2017).

[18] ABDI F, AHMAD J, DORMOHAMMADI S et al. Development of ASTM Test Standards for the Mode I Interlaminar Fracture Toughness (G_IC—Crack Growth Resistance) of Ceramic Matrix Composites[J]. International Gas Turbine Institute, Oslo, Norway.

[19] SHI W G, ZHANG C, WANG B et al. Mode I interlaminar fracture toughness of two-dimensional continuous fiber reinforced ceramic matrix composites using wedge-loaded double cantilever beam method[J]. Composites Part A: Applied Science and Manufacturing, 168: 107466(2023).

[20] KANNINEN M F. An augmented double cantilever beam model for studying crack propagation and arrest[J]. International Journal of Fracture, 83(1973).

[21] ASTM International. Standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites:ASTM D5528-13[standard]. West Conshohocken(2013).