[2] D Wang, J B Chen, P D Zhu et al. Binary microcrystal additives enabled antisolvent-free perovskite solar cells with high efficiency and stability. Adv Energy Mater, 13, 2203649(2023).

[3] S Y Han, J J Do, J W Jung. Strategic defect control of perovskite nanocrystallites with octylammonium iodide toward efficient red perovskite light-emitting diodes with high operative stability. J Mater Chem A, 12, 16687(2024).

[4] X T Liu, X Q Jiang, Y F Yin et al. Dominating (111) facets with ordered stacking in perovskite films. Energy Environ Sci, 17, 6058(2024).

[5] Y L Tao, Z Liang, J J Ye et al. Bidirectional anions gathering strategy afford efficient mixed Pb-Sn perovskite solar cells. Small, 19, 2207480(2023).

[6] Y L Tao, Z Liang, J J Ye et al. Self-deposited passivation for decreasing scalable processing loss of perovskite solar cells. Commun Mater, 5, 166(2024).

[7] Z Liang, Y Zhang, H F Xu et al. Homogenizing out-of-plane cation composition in perovskite solar cells. Nature, 624, 557(2023).

[8] J R Wang, L Y Bi, X F Huang et al. Bilayer interface engineering through 2D/3D perovskite and surface dipole for inverted perovskite solar modules. eScience, 4, 100308(2024).

[9] T Wang, L Y Bi, L Yang et al. Dimensional regulation from 1D/3D to 2D/3D of perovskite interfaces for stable inverted perovskite solar cells. J Am Chem Soc, 146, 7555(2024).

[10] C Q Ma, M C Kang, S H Lee et al. Facet-dependent passivation for efficient perovskite solar cells. J Am Chem Soc, 145, 24349(2023).

[11] H F Liu, T T Liu, X T Wang et al. Surface formamidine cation immobilization for efficient FA-based perovskites solar cells. Adv Energy Mater, 14, 2401809(2024).

[12] X H Luo, X Liu, X S Lin et al. Recent advances of inverted perovskite solar cells. ACS Energy Lett, 9, 1487(2024).

[13] L Canil, T Cramer, B Fraboni et al. Tuning halide perovskite energy levels. Energy Environ Sci, 14, 1429(2021).

[14] J R Wang, L Y Bi, Q Fu et al. Methods for passivating defects of perovskite for inverted perovskite solar cells and modules. Adv Energy Mater, 14, 2401414(2024).

[15] Y Jiang, T F Xu, H Q Du et al. Organic-inorganic hybrid nature enables efficient and stable CsPbI3-based perovskite solar cells. Joule, 7, 2905(2023).

[16] C Liu, Y Yang, H Chen et al. Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells. Science, 382, 810(2023).

[17] N Yang, C Zhu, Y H Chen et al. An in situ cross-linked 1D/3D perovskite heterostructure improves the stability of hybrid perovskite solar cells for over 3000 h operation. Energy Environ Sci, 13, 4344(2020).

[18] D Wang, Z X Liu, Y Qiao et al. Rigid molecules anchoring on NiOx enable >26% efficiency perovskite solar cells. Joule, 9, 101815(2025).

[19] Q B Cai, Q Tan, J C He et al. Enhancing electron transport for efficiency-recorded HTL-free inverted perovskite solar cells by molecular complementary passivation. Joule, 101880(2025).

[20] X Q Jiang, L N Zhu, B Q Zhang et al. Spatial conformation engineering of aromatic ketones for highly efficient and stable perovskite solar cells. J Am Chem Soc, 146, 34833(2024).

[21] Y Y Ma, F M Li, J Gong et al. Bi-molecular kinetic competition for surface passivation in high-performance perovskite solar cells. Energy Environ Sci, 17, 1570(2024).

[22] X Y Zhou, J W Wu, J Zeng et al. Target therapy on buried interface engineering enables stable inverted perovskite solar cells with 25% power conversion efficiency. Nano Energy, 130, 110170(2024).

[23] D B Khadka, Y Shirai, M Yanagida et al. Defect passivation in methylammonium/bromine free inverted perovskite solar cells using charge-modulated molecular bonding. Nat Commun, 15, 882(2024).

[24] Y T Zheng, Y R Li, R S Zhuang et al. Towards 26% efficiency in inverted perovskite solar cells via interfacial flipped band bending and suppressed deep-level traps. Energy Environ Sci, 17, 1153(2024).

[25] X X Liu, J J Zhang, L T Tang et al. Over 28% efficiency perovskite/Cu(InGa)Se2 tandem solar cells: Highly efficient sub-cells and their bandgap matching. Energy Environ Sci, 16, 5029(2023).

[26] Q Song, H K Gong, F L Sun et al. Bridging the buried interface with piperazine dihydriodide layer for high performance inverted solar cells. Small, 19, e2208260(2023).

[27] H F Xu, Z Liang, J J Ye et al. Constructing robust heterointerfaces for carrier viaduct via interfacial molecular bridges enables efficient and stable inverted perovskite solar cells. Energy Environ Sci, 16, 5792(2023).

[28] C A R Perini, E Rojas-Gatjens, M Ravello et al. Interface reconstruction from ruddlesde-popper structures impacts stability in lead halide perovskite solar cells. Adv Mater, 34, 2204726(2022).

[29] B B Liu, X D Ren, R Li et al. Stabilizing top interface by molecular locking strategy with polydentate chelating biomaterials toward efficient and stable perovskite solar cells in ambient air. Adv Mater, 36, e2312679(2024).

[30] S Y Lin, Y H Xiao, J Ma et al. Phenylethylammonium iodide induced "in situ healing" behavior for carbon-electrode basing, hole-conductor-free perovskite solar cells. Appl Phys Lett, 124, 253504(2024).

[31] H W Guan, J Wu, D B Yang et al. Controllable heavy n-type behaviours in inverted perovskite solar cells with non-conjugated passivants. Angew Chem Int Ed, 64, e202418606(2025).

[32] F Z Li, X Deng, Z S Shi et al. Hydrogen-bond-bridged intermediate for perovskite solar cells with enhanced efficiency and stability. Nat Photonics, 17, 478(2023).

[33] X Chen, Q Wang, H Wei et al. Minimizing the buried interfacial energy loss using a fluorine-substituted small molecule for 25.92%-efficiency and stable inverted perovskite solar cells. Energy Environ Sci, 17, 7342(2024).

[34] S B Xiong, F Y Tian, F Wang et al. Reducing nonradiative recombination for highly efficient inverted perovskite solar cells via a synergistic bimolecular interface. Nat Commun, 15, 5607(2024).

[35] Z T Tan, W G Liu, R Chen et al. Enhancing interfacial contact for efficient and stable inverted perovskite solar cells and modules. Adv Funct Materials, 35, 2419133(2025).

[36] B Li, D Y Zhang, Z Y Ni et al. Eliminating resistance-capacitance coupling shielding for depicting the defect landscape in perovskite solar cells by capacitance spectroscopy. Adv Sci, 11, 2403984(2024).

[37] P Chen, D X He, X Huang et al. Bilayer 2D-3D perovskite heterostructures for efficient and stable solar cells. ACS Nano, 18, 67(2024).

[38] E Choi, J W Lee, M Anaya et al. Synergetic effect of aluminum oxide and organic halide salts on two-dimensional perovskite layer formation and stability enhancement of perovskite solar cells. Adv Energy Mater, 13, 2370158(2023).

[39] H Kim, S U Lee, D Y Lee et al. Optimal interfacial engineering with different length of alkylammonium halide for efficient and stable perovskite solar cells. Adv Energy Mater, 9, 1902740(2019).

[40] S H Wang, T Sakurai, W J Wen et al. Energy level alignment at interfaces in metal halide perovskite solar cells. Adv Materials Inter, 7, 1800260(2020).

[41] X Zhang, J H Cai, L W Yang et al. Ligand strategy for perovskite displays: A review. ACS Energy Lett, 9, 1587(2024).