[1] Obadele B A, Olubambi P A, Andrews A et al. Electrochemical behaviour of laser-clad Ti6Al4V with CP Ti in 0.1 M oxalic acid solution[J]. Journal of Alloys and Compounds, 646, 753-759(2015).

[2] Sun R L, Liu Y, Yang D Z. Microstructure and tribological properties of NiCrBSi-TiC laser clad layer on titanium alloy substrate[J]. Chinese Journal of Lasers, 30, 659-662(2003).

[3] Lee Y H, Ko S, Park H et al. Effect of TiC particle size on high temperature oxidation behavior of TiC reinforced stainless steel[J]. Applied Surface Science, 480, 951-955(2019). http://www.onacademic.com/detail/journal_1000041581502999_46fc.html

[4] Yang G, He S, Qin L Y et al. Microstructure and wear resistance of WC particles reinforced titanium matrix composite coating[J]. Applied Laser, 33, 365-369(2013).

[5] Xiao L S, Yan D R, He J N et al. Nanostructured TiN coating prepared by reactive plasma spraying in atmosphere[J]. Applied Surface Science, 253, 7535-7539(2007). http://www.sciencedirect.com/science/article/pii/S0169433207004898

[6] Maja M E, Falodun O E, Obadele B A et al. Nanoindentation studies on TiN nanoceramic reinforced Ti-6Al-4V matrix composite[J]. Ceramics International, 44, 4419-4425(2018).

[7] Romero F, Amigó V, Salvador M D et al[J]. microstructural properties of titanium matrix composites reinforced by TiN particles. Materials Science Forum, 534/535/536, 825-828(2007).

[8] Dai N W, Zhang L C, Zhang J X et al. Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution[J]. Corrosion Science, 102, 484-489(2016). http://www.sciencedirect.com/science/article/pii/S0010938X15301402

[9] Balla V K, Bhat A, Bose S et al. Laser processed TiN reinforced Ti6Al4V composite coatings[J]. Journal of the Mechanical Behavior of Biomedical Materials, 6, 9-20(2012). http://europepmc.org/abstract/med/22301169

[10] Das M, Balla V K, Basu D et al. Laser processing of in situ synthesized TiB-TiN-reinforced Ti6Al4V alloy coatings[J]. Scripta Materialia, 66, 578-581(2012). http://www.sciencedirect.com/science/article/pii/S1359646212000267

[11] Carter L N, Martin C, Withers P J et al. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy[J]. Journal of Alloys and Compounds, 615, 338-347(2014). http://www.sciencedirect.com/science/article/pii/S092583881401528X

[12] Attar H, Ehtemam-Haghighi S, Kent D et al. Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes[J]. Materials Science and Engineering: A, 705, 385-393(2017).

[13] Bose S, Pathak L C, Singh R. Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer's solution for bio-implant application[J]. Applied Surface Science, 433, 1158-1174(2018).

[14] Li J F, Wei Z Y, Lu B H. Research progress on technology of selective laser melting of titanium and titanium alloys[J]. Laser & Optoelectronics Progress, 55, 011403(2018).

[15] Zhao S Z, Jin J B, Xie M et al. Effects of scanning speed on microstructure and wear resistance of Cu80Fe20 immiscible coatings prepared by laser cladding[J]. Chinese Journal of Lasers, 46, 0302005(2019).

[16] Zhou S F, Dai X Q. Microstructure evolution of Fe-based WC composite coating prepared by laser induction hybrid rapid cladding[J]. Applied Surface Science, 256, 7395-7399(2010). http://www.onacademic.com/detail/journal_1000034050634510_0592.html

[17] Zhao L, Cui C X, Liu S J et al. Microstructure and mechanical properties of TC4 alloy modified and reinforced by TiB+TiN/Ti inoculants ribbons[J]. Materials Science and Engineering: A, 663, 8-16(2016). http://www.sciencedirect.com/science/article/pii/S0921509316303136

[18] Li J Q, Lin X, Guo P F et al. Electrochemical behaviour of laser solid formed Ti-6Al-4V alloy in a highly concentrated NaCl solution[J]. Corrosion Science, 142, 161-174(2018). http://www.onacademic.com/detail/journal_1000040420003910_9545.html

[19] Chen Y, Zhang J X, Dai N W et al. Corrosion behaviour of selective laser melted Ti-TiB biocomposite in simulated body fluid[J]. Electrochimica Acta, 232, 89-97(2017). http://www.sciencedirect.com/science/article/pii/S0013468617303882

[20] Brug G J, Sluyters-Rehbach M et al. . The analysis of electrode impedances complicated by the presence of a constant phase element[J]. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 176, 275-295(1984). http://www.sciencedirect.com/science/article/pii/S0022072884803241

[21] Wu B T, Pan Z X, Li S Y et al. The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution[J]. Corrosion Science, 137, 176-183(2018).

[22] Jovic V D, Barsoum M W. Corrosion behavior and passive film characteristics formed on Ti, Ti3SiC2, and Ti4AlN3 in H2SO4 and HCl[J]. Journal of the Electrochemical Society, 151, B71-B76(2004).

[23] Coster D. Kronig R D L. New type of auger effect and its influence on the X-ray spectrum[J]. Physica, 2, 13-24(1935). http://www.sciencedirect.com/science/article/pii/S003189143590060X