[11] [11] BOEHM P, MONDESHKI M, FREY H. Polysiloxane-backbone block copolymers in a one-pot synthesis: a silicone platform for facile functionalization[J]. Macromolecular Rapid Communications, 2012, 33(21): 1861-1867.

[12] [12] BEAUCARNE G, EDER G, JADOT E, et al. Repair and preventive maintenance of photovoltaic modules with degrading backsheets using flowable silicone sealant[J]. Progress in Photovoltaics: Research and Applications, 2022, 30(8): 1045-1053.

[13] [13] SALVO M, RIZZO S, CASALEGNO V, et al. Shear and bending strength of SiC/SiC joined by a modified commercial adhesive[J]. International Journal of Applied Ceramic Technology, 2012, 9(4): 778-785.

[14] [14] COLOMBO P, RICCARDI B, DONATO A, et al. Joining of SiC/SiCf ceramic matrix composites for fusion reactor blanket applications[J]. Journal of Nuclear Materials, 2000, 278(2/3): 127-135.

[15] [15] YAMAMOTO S, KUWAHARA R, TANAKA K. Effects of chemistry of silicon surfaces on the curing process and adhesive strength for epoxy resin[J]. ACS Applied Polymer Materials, 2022, 4(8): 6038-6046.

[16] [16] LV X Y, LIANG Y S, ZHONG J, et al. Organic silicone-modified waterborne epoxy coatings using aqueous curing agents technology[J]. Pigment & Resin Technology, 2024, 53(4): 434-441.

[20] [20] BALDI A, COMBA A, FERRERO G, et al. External gap progression after cyclic fatigue of adhesive overlays and crowns made with high translucency zirconia or lithium silicate[J]. Journal of Esthetic and Restorative Dentistry, 2022, 34(3): 557-564.

[21] [21] SHIM G H, KWEON B, JI M K, et al. A high-temperature adhesive for stainless steel 304: effect of Cr growth at the interface of alkali silicate adhesive[J]. International Journal of Adhesion and Adhesives, 2022, 116: 103152.

[22] [22] SISMANOGLU S, YILDIRIM-BILMEZ Z, GURCAN A T, et al. Influence of application mode of universal adhesive on the surface morphology, elemental composition and bond strength of calcium silicate-based cements to composite resin: a SEM-EDX microanalysis study[J]. Journal of Adhesion Science and Technology, 2022, 36(17): 1833-1846.

[25] [25] ZHIGACHEV A O, AGARKOVA E A, MATVEEV D V, et al. CaO-SiO2-B2O3 glass as a sealant for solid oxide fuel cells[J]. Ceramics, 2022, 5(4): 642-654.

[29] [29] SHANG X, MARQUES E A S, MACHADO J J M, et al. Review on techniques to improve the strength of adhesive joints with composite adherends[J]. Composites Part B: Engineering, 2019, 177: 107363.

[51] [51] DAUGIRDAS J T, FINN W F, EMMETT M, et al. The phosphate binder equivalent dose[J]. Seminars in Dialysis, 2011, 24(1): 41-49.

[53] [53] KARPUKHIN I A, VLADIMIROV V S, MOIZIS S E. A mechanism for phosphate hardening and prospects for the use of metal phosphate materials (an overview). Part II. adhesive properties of binding phosphate materials[J]. Refractories and Industrial Ceramics, 2005, 46(5): 329-332.

[59] [59] LIU M M, HU H X, ZHENG Y G. Effects of three sealing methods of aluminum phosphate sealant on corrosion resistance of the Fe-based amorphous coating[J]. Surface and Coatings Technology, 2017, 309: 579-589.

[60] [60] VIPPOLA M, AHMANIEMI S, KERNEN J, et al. Aluminum phosphate sealed alumina coating: characterization of microstructure[J]. Materials Science and Engineering: A, 2002, 323(1/2): 1-8.

[71] [71] LIU X M, WU Y Q, ZHANG X L, et al. Study on the effect of organic additives and inorganic fillers on properties of sodium silicate wood adhesive modified by polyvinyl alcohol[J]. BioResources, 2015, 10(1): 1528-1542.

[72] [72] SHI X M, XU S M, LIN J T, et al. Synthesis of SiO2-polyacrylic acid hybrid hydrogel with high mechanical properties and salt tolerance using sodium silicate precursor through sol-gel process[J]. Materials Letters, 2009, 63(5): 527-529.

[76] [76] KRIVENKO P, RUDENKO I, KONSTANTYNOVSKYI O, et al. Feasibility of incorporating SO42--ions in zeolite-like matrices based on alkaline aluminosilicate binders[J]. Construction and Building Materials, 2023, 391: 131878.

[77] [77] SHIM G H, KIM J H, JUN T S, et al. Improving the water resistance and adhesion strength of a mixed alkali silicate adhesive by optimizing the molar ratio and curing conditions[J]. Journal of Adhesion Science and Technology, 2020, 34(12): 1269-1282.

[78] [78] SHIM G H, KWEON B, LEE M S, et al. Highly improved mechanical and thermal properties of alkali silicate and graphene nanoplatelet composite adhesives[J]. International Journal of Adhesion and Adhesives, 2021, 110: 102942.

[85] [85] ZHANG J M, CAO X Q, PENG C, et al. Advanced high-temperature-resistant silicate adhesive reinforced by intermetallic compounds for joining SiC/SiC composites[J]. Composites Science and Technology, 2023, 243: 110226.

[86] [86] CHEN Z L, LIU J X, WU Y, et al. The preparation and properties of an alloying modified ceramic-precursor high-temperature resistant adhesive for joining zirconia ceramics and titanium-based superalloys[J]. Materials Today Communications, 2022, 33: 104353.

[87] [87] DAY P, CUTKOSKY M, MCLAUGHLIN A. Effects of gamma irradiation on adhesion of polymer microstructure-based dry adhesives[J]. Nuclear Technology, 2012, 180(3): 450-455.

[89] [89] ERN M, CHLUP Z, STRACHOTA A, et al. Rheological behaviour and thermal dilation effects of alumino-silicate adhesives intended for joining of high-temperature resistant sandwich structures[J]. Journal of the European Ceramic Society, 2017, 37(5): 2209-2218.

[91] [91] CUI J J, WANG S H, WANG S L, et al. Strength and failure analysis of adhesive single-lap joints under shear loading: effects of surface morphologies and overlap zone parameters[J]. Journal of Manufacturing Processes, 2020, 56: 238-247.

[92] [92] GLIEK E, DILER E A, ERTUGRUL O. Synergistic effect of surface treatment and adhesive type on bonding performance of thin Al6061 joints for automotive applications[J]. International Journal of Adhesion and Adhesives, 2024, 130: 103641.

[93] [93] SAFARI A, FARAHANI M, GHABEZI P. Experimental study on the influences of different surface treatment processes and adhesive type on the aluminum adhesive-bonded joint strength[J]. Mechanics Based Design of Structures and Machines, 2022, 50(7): 2400-2413.