[1] [1] ZEREN A. Embeddability behaviour of tin-based bearing material in dry sliding［J］. Materials & Design, 2007, 28(8): 2344-2350.

[2] [2] MEHDIZADEH M, KHODABAKHSHI F. An investigation into failure analysis of interferingpart of a steam turbine journal bearing［J］. Case Studies in Engineering Failure Analysis, 2014, 2(2): 61-68.

[3] [3] ZHANG D Y, JOHN K L, DONG G N, et al. Tribological properties of Tin-based Babbitt bearing alloy with polyurethane coating under dry and starved lubrication conditions［J］. Tribology International, 2015, 90: 22-31.

[4] [4] ZHANG D Y, ZHAO F F, LI Y, et al. Study on tribological properties of multi-layer surface texture on babbitt alloys surface［J］. Applied Surface Science, 2016, 390: 540-549.

[5] [5] ALCOVER C J, PUKASIEWICZ P R, GERALDO A. Evaluation of microstructure, mechanical and tribological properties of a Babbitt alloy deposited by arc and flame spray processes［J］. Tribology International, 2019, 131: 148-157.

[6] [6] TAO X P, ZHANG S, ZHANG C H, et al. Effect of Fe and Ni contents on microstructure and wear resistance of aluminum bronze coatings on 316 stainless steel by laser cladding［J］. Surface and Coatings Technology, 2018, 342: 76-84.

[7] [7] YAO J H, ZHANG J, WU G L, et al. Microstructure and wear resistance of laser cladded composite coatings prepared from pre-alloyed WC-NiCrMo powder with different laser spots［J］. Optics & Laser Technology, 2018, 101: 520-530.

[8] [8] DENG P S, YAO C W, FENG K, et al.Enhanced wear resistance of laser cladded graphene nanoplatelets reinforced Inconel 625 superalloy composite coating［J］. Surface and Coatings Technology, 2018, 335: 334-344.

[9] [9] ZHANG Z H, WANG X, ZHANG Q Q, et al. Fabrication of Fe-based composite coatings reinforced by TiC particles and its microstructure and wear resistance of 40Cr gear steel by low energy pulsed laser cladding［J］. Optics & Laser Technology, 2019, 119: 105622.

[10] [10] LU J Z, CAO J, LU H F, et al. Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding［J］. Surface and Coatings Technology, 2019, 369: 228-237.

[11] [11] CHEN Z F, YAN H, ZHANG P L, et al. Microstructural evolution and wear behaviors of laser-clad Stellite 6/NbC/h-BN self-lubricating coatings［J］. Surface and Coatings Technology, 2019, 372: 218-228.

[12] [12] MATTHEW T R, PAUL A C, ZHANG Z, et al. Liquation and post-weld heat treatment cracking in rene 80 laser repair welds［J］. Journal of Materials Processing Technology, 2012, 212(1): 188-197.

[15] [15] WENG F, YU H J, CHEN C Z, et al. Microstructures and wear properties of laser cladding Co-based composite coatings on Ti-6Al-4V［J］. Materials & Design, 2015, 80: 174-181.

[16] [16] ZHU L J, LIU Y H, LI Z W, et al. Microstructure and properties of Cu-Ti-Ni composite coatings on gray cast iron fabricated by laser cladding［J］. Optics & Laser Technology, 2020, 122: 105879.

[17] [17] AGHILI S E, SHAMANIAN M. Investigation of powder fed laser cladding of NiCr-chromium carbides single-tracks on titanium aluminide substrate［J］. Optics & Laser Technology, 2019, 119: 105652.

[18] [18] DAI X Q, ZHOU S F, WANG M F, et al. Microstructure evolution of phase separated Fe-Cu-Cr-C composite coatings by laser induction hybrid cladding［J］. Surface and Coatings Technology, 2017, 324: 518-525.

[19] [19] ZHOU F M, ZHANG Q Y, SHI M X, et al. The effect of TIG arc brazing current on interfacial structure and bonding strength of tin-based babbit［J］. Journal of Adhesion Science and Technology, 2017, 31(21): 2312-2322.